2021 Ford F-150 Owners Manual - Climate Control - Vehicles With: Automatic Temperature Control

Climate Control - Vehicles With: Automatic Temperature Control

E339318

Depending on your vehicle options, the controls could look different than what you see here.

Press the button.

Press the button to recirculate air currently in the passenger compartment.

Note: Recirculated air could turn off or be prevented from turning on in all air flow modes except maximum cooling to reduce the risk of the windows fogging up.

Note: Recirculated air could turn on and off when you direct air to the instrument panel or footwell air vents during hot weather to improve cooling efficiency.

Press the button.

Note: Under certain conditions, the air conditioning compressor could continue to operate after you switch air conditioning off.

Press the button to activate the selection screen.

Press the button on the touchscreen to switch the windshield air vents on.

Make sure that the instrument panel air vents are switched off.

Make sure that the footwell air vents are switched off.

Press the button.

Air flows through the windshield air vents, and the blower motor adjusts to the highest speed.

You can also use this setting to defog and clear the windshield of a thin covering of ice.

Note: To prevent window fogging, you cannot select recirculated air when maximum defrost is on.

Note: The heated rear window also turns on when you select maximum defrost.

158

Press the button.

Note: When you switch maximum cooling off, air conditioning remains on.

EQUIPPED)

When you switch the heated rear window on, the heated wiper park also turns on.

Press the button to clear the rear window of thin ice and fog. The heated rear window turns off

after a short period of time.

Note: Do not use harsh chemicals, razor blades or other sharp objects to clean or remove decals from the inside of the heated rear window as this could cause damage to the heated rear window grid lines not covered by the vehicle Warranty.

Heated Mirrors

Press the button.

Press up or down on the control to select the blower motor speed.

Note: For Hybrid Electric Vehicle (HEV) and Plug-In Hybrid Electric Vehicle (PHEV) vehicles, the blower motor may run, and you may feel airflow when the climate control is off to provide cooling to the battery.

Turn the control on the left-hand side of the climate control to set the left-hand temperature.

Note: This control also sets the right-hand side temperature when you switch off dual zone mode.

Turn the control on the right-hand side of the climate control to set the right-hand temperature.

159

Press the button to activate the selection screen.

Press the button on the touchscreen.

Press the button to activate the selection screen.

Press the button on the touchscreen.

Press the button to activate the selection screen.

Press the button on the touchscreen.

Press the button to switch auto mode on. Repeatedly press the button to adjust auto mode.

Note: When you switch auto mode on, lights on the blower motor control do not illuminate to indicate the blower motor speed.

Adjust the blower motor control or air distribution control to switch auto mode off.

The indicators are on the Auto Mode button.

160

Press the button.

Prolonged use of recirculated air may cause the windows to fog up.

You may feel a small amount of air from the footwell air vents regardless of the air distribution setting.

To reduce humidity build-up inside your vehicle, do not drive with the system switched off or with recirculated air always switched on.

Do not place objects under the front seats as this may interfere with the airflow to the rear seats.

Remove any snow, ice or leaves from the air intake area at the base of the windshield.

To improve the time to reach a comfortable temperature in hot weather, drive with the windows open until you feel cold air through the air vents.

Adjusting the settings when your vehicle interior is extremely hot or cold is not necessary. Automatic mode is best recommended to maintain set temperature.

The system adjusts to heat or cool the interior to the temperature you select as quickly as possible.

For the system to function efficiently, the instrument panel and side air vents should be fully open.

If you press AUTO during cold outside temperatures, the system directs air flow to the windshield and side window air vents.In addition, the blower motor may run at a slower speed until the engine warms up.

If you press AUTO during hot temperatures and the inside of the vehicle is hot, the system uses recirculated air to maximize interior cooling. Blower motor speed may also reduce until the air cools.

Press AUTO.

Adjust the temperature function to the setting you prefer.

Press AUTO.

Adjust the temperature function to the setting you prefer. Use 72°F (22°C) as a starting point, then adjust the setting as necessary.

Press MAX A/C.

Press AUTO.

Adjust the temperature function to the setting you prefer. Use 72°F (22°C) as a starting point, then adjust the setting as necessary.

1. Press and release defrost or maximum defrost.

161

Adjust the temperature control to the setting you prefer. Use 72°F (22°C) as a starting point, then adjust the setting as necessary.

162