Auto-Start-Stop
The system is designed to help reduce fuel consumption and CO2 emissions by stopping the engine when it is idling, for example at traffic lights.
|
|
WARNING: Apply the parking brake, shift into park (P), switch the ignition off and remove the key before you leave your vehicle. Failure to follow this instruction could result in personal injury or death.
WARNING: Apply the parking brake, shift into park (P), switch the ignition off and remove the key before you open the hood or have any service or repair work completed. If you do not switch the ignition off, the engine could restart at any time. Failure to follow this instruction could result in personal injury or death.SWITCHING AUTO-START- STOP ON AND OFF
The system turns on when you switch the ignition on.
Press the button to switch the system off.
Note: OFF illuminates in the switch.
Note: Deactivating the system using the button lasts only one key cycle.
Press the button again to switch the system back on.
Note: The system turns off if it detects a malfunction. If the system malfunctions, have your vehicle checked as soon as possible.
Stop your vehicle, keep your foot on the brake pedal and the transmission in drive (D).
Note: Power assist steering turns off when the engine stops.
Release the brake pedal or press the accelerator pedal.
A message appears in the information display if the system requires you to take action.
|
|
WARNING: The system may require the engine to automatically restart when the auto-start-stop indicator illuminates green or flashes amber. Failure to follow this instruction could result in personal injury.The Auto-Start-Stop indicator illuminates green when the engine stops. It flashes amber
and a message appears when you need to take action.
The Auto-Start-Stop indicator illuminates gray with a strikethrough when the system
is not available.
224
Note: You can display the reason why the system is not available in the information display.
A message appears in the information display if the system requires you to take action.
|
Message |
Condition |
Action |
|
Auto StartStop Press Brake to Start Engine |
The system needs to restart the engine but requires your confirmation. |
Press the brake pedal to restart the engine. |
|
Auto StartStop Press a Pedal to Start Engine |
The system needs to restart the engine but requires your confirmation. |
Press the brake pedal or the accelerator pedal to restart the engine. |
225
Why does the engine not always stop when I expect it to?
The system is designed to work in a way that complements other vehicle systems, allowing them to operate at optimum performance.
The system does not stop the engine if:
• The driver door is open.
• Your vehicle is at high altitude.
• The heated windshield is on.
• The engine is warming up.
• The outside temperature is too low or too high.
• The battery charge is low.
• The battery temperature is outside the optimal operating range.
• The engine is required to run to maintain interior climate and reduce fogging.
The system is designed to work in a way that complements other vehicle systems, allowing them to operate at optimum performance.
The system restarts the engine if:
• You switch the heated windshield on.
• You switch maximum defrost on.
• Your vehicle starts to roll downhill in neutral.
• The engine is required to run to maintain adequate brake system assistance.
• The engine is required to run to maintain interior climate and reduce fogging.
No. The system plays an important role in reducing the fuel consumption and the CO2 emissions.
Your vehicle has an enhanced battery and starter motor that are designed for the increased number of engine starts.
226
Download Manual