Blind Spot Information
(BSI)*Alerts you to a detected vehicle in your left or right blind spot while driving 20 mph (32 km/h) or higher.
When a vehicle is detected in your blind spot, the blind spot indicator turns on and stays lit until the area is clear.
When your turn signal is on and a vehicle is detected, the blind spot indicator blinks and a beep sounds until the area is clear or the turn signal is off.
Changing Settings
Determine the warning type, or turn the system off.
- From the Home screen, select Settings.
- Select Vehicle. The vehicle must be in Park (P).
- Select Driver Assist System Setup.
- Select an alert type, or turn the system off.
- Press BACK to exit the menu.
Important Safety Reminder
Like all assistance systems, BSI has limitations. Over-reliance on the system may result in a collision. The system is for your convenience only.
Failure to visually confirm that it is safe to change lanes before doing so may result in a crash and serious injury or death. Do not rely only on the blind spot information system when changing lanes.
Always look in your mirrors, to either side of your vehicle, and behind you for other vehicles before changing lanes.
*if equipped
- Cross Traffic Monitor*
- Multi-View Rear Camera
Download Manual