Changing the Front Wiper Blade
-
- Set the power mode to ON, then to VEHICLE OFF.
- Within 10 seconds of setting the power mode to VEHICLE OFF, hold the wiper switch in the MIST position for more than two seconds.
- Both wiper arms are set to the maintenance position as shown in the image.
-
- Lift both wiper arms.
-
- Depress the lock tab, then slide the wiper blade off the wiper arm.
- Slide the new wiper blade onto the wiper arm until it clicks into place.
- Lower both wiper arms.
- Set the power mode to ON, then set the wiper switch to the MIST position once.
- The wiper arms return to the standard position.
- Detail
NOTICE
Avoid dropping the wiper arm onto the windshield, it may damage the wiper arm and/or the windshield.
Changing the Rear Wiper Blade Rubber
-
- Raise the wiper arm off.
- Pivot up the bottom end of the wiper blade until it comes off from the wiper arm.
-
- Slide the wiper blade out of the end with the indent.
-
- Remove the retainers from the rubber blade that has been removed, and mount to a new rubber blade.
-
- Slide the new wiper blade onto the holder.
- Make sure it is engaged correctly, then install the wiper blade assembly onto the wiper arm.
- Slide the new wiper blade onto the holder.
- Detail
NOTICE
Avoid dropping the wiper arm; it may damage the rear window.
Download Manual