Using the Bluetooth® audio system
Bluetooth® audio system
The Bluetooth® audio system enables you to enjoy music played on a portable digital audio player (portable player) from the vehicle speakers via wireless communication.
This audio system supports Bluetooth®, a wireless data system capable of playing portable audio music without cables. If your portable player does not support Bluetooth®, the Bluetooth® audio system will not function.
Owners of models equipped with a Display Audio system should refer to the “Display Audio System Owner's Manual”.
Owners of models equipped with a navigation system should refer to the “Navigation System Owner's Manual”.
Conditions under which the system will not operate
• If using a portable player that does not support Bluetooth®
• If the portable player is switched off
• If the portable player is not connected
• If the portable player’s battery is low
• If the portable player is behind the seat or in the glove box or console box
• If metal is covering or touching the portable player
When transferring ownership of the vehicle
Be sure to initialize the system to prevent personal data from being improperly accessed.
About Bluetooth®
Bluetooth is a registered trademark of Bluetooth SIG. Inc.
Compatible models
• Bluetooth® specifications:
Ver. 1.2
• Following Profiles:
• A2DP (Advanced Audio Distribution Profile) Ver. 1.0
• AVRCP (Audio/Video Remote Control Profile) Ver. 1.0 or higher (Ver.
1.3 or higher recommended)
Portable players must correspond to the above specifications in order to be connected to the Bluetooth® audio system. However, please note that some functions may be limited depending on the type of portable player.
Certification for the Bluetooth® audio system
FCC ID: AJDK025
AJDK032
IC ID: 775E-K025
775E-K032
MADE IN JAPAN
This device complies with Part 15 of FCC Rules and Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of this device.
Le présent appareil est conforme aux la partie 15 des règles de la FCC et CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes: (1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.
CAUTION
FCC WARNING
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Radio Frequency Radiation Exposure. This equipment complies with FCC/ IC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines in Supplement C to OET65 and RSS-102 of the IC radio frequency (RF) Exposure rules. This equipment has very low levels of RF energy that it deemed to comply without maximum permissive exposure evaluation (MPE). But it is desirable that it should be installed and operated keeping the radiator at least 20 cm or more away from person’s body (excluding extremities: hands, wrists, feet and ankles).
Cet équipement est conforme aux limites d’exposition aux rayonnements énoncées pour un environnement non contrôlé et respecte les règles les radioélectriques (RF) de la FCC lignes directrices d’exposition dans le Supplément C à OET65 et d’exposition aux fréquences radioélectriques (RF) CNR-102 de l’IC. Cet équipement émet une énergie RF très faible qui est considérée conforme sans évaluation de l’exposition maximale autorisée.
Cependant, cet équipement doit être installé et utilisé en gardant une distance de 20 cm ou plus entre le dispositif rayonnant et le corps (à l’exception des extrémités: mains, poignets, pieds et chevilles).
This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.
Caution while driving
Do not connect portable players or operate the controls.
NOTICE
To prevent damage to portable players
Do not leave portable players in the vehicle. The temperature inside the vehicle may become high, resulting in damage to the player.
Using the Bluetooth® audio system
Audio unit
1. Display Track title, Artist name, Album name, Elapsed time, “Streaming Audio”, etc. is displayed.
2. Selects items such as menu and number Turn: Selects an item Press: Inputs the selected item 3. Bluetooth-Audio connection condition If “BT” is not displayed, the Bluetooth® audio system cannot be used.
Microphone
Operating the system using voice commands
By following voice guidance instructions output from the speaker, voice commands enable to the operation of the Bluetooth® audio system without the need to check the display or operate 
.
Operation procedure when using voice commands
Press the talk switch and follow voice guidance instructions.
Auxiliary commands when using voice commands
The following auxiliary commands can be used when operating the system using a voice command:
“Cancel”: Exits the Bluetooth® audio setup “Repeat”: Repeats the previous voice guidance instruction “Go back”: Returns to the previous procedure “Help”: Reads aloud the function summary if a help comment is registered for the selected function
Using the Bluetooth® audio system for the first time
Before using the Bluetooth® audio system, it is necessary to register a Bluetooth® enabled portable player in the system. Follow the procedure below to register (pair) a portable player:
Press and hold
until “BT AUDIO” is displayed.
Press
(SETUP).
The introductory guidance and portable player name registration instructions are heard.
Select “Pair Audio Players (Pair
audio player)” using a voice command or 
.
Register a portable player name
by either of the following methods:
a. Select “Record Name” using 
,
and say the name to be registered.
b. Press the talk switch and say the name to be registered.
A voice guidance instruction to confirm the input is heard.
Select “Confirm” using a voice
command or 
.
A passkey is displayed and heard, and a voice guidance instruction for inputting the passkey into the portable player is heard.
Input the passkey into the
portable player.
Refer to the manual that comes with the portable player for the operation of the portable player.
Guidance for registration completion is heard.
If the portable player has a Bluetooth® phone, the phone can be registered at the same time.
Menu list of the Bluetooth® audio system
“BT Audio Setup” can be canceled by pressing the on-hook switch or saying the voice command, “Cancel”.
When using a voice command
For numbers, say a combination of single digits from zero to nine.
Say the command correctly and clearly.
Situations that the system may not recognize your voice
• When driving on rough roads
• When driving at high speeds
• When air is blowing out of the vents onto the microphone
• When the air conditioning fan emits a loud noise
Operations that cannot be performed while driving
• Operating the system with 
• Registering a portable player to the system
Changing the passkey
Operating a Bluetooth® enabled portable player
Selecting an album
Press “∨” or “∧” on 
.
Selecting tracks
Press “∧” or “∨” on 
.
Playing and pausing tracks
Press 
.
Fast-forwarding and reversing tracks
Press and hold “∧” or “∨” on 
.
Switching the display
Press 
.
Each time 
is pressed, the
display changes in the following order:
Track title → Track title/Artist name → Track title/Album name → Track title/Elapsed time
Using the steering wheel audio switches
Bluetooth® audio system functions
Depending on the portable player that is connected to the system, certain functions may not be available.
Setting up a Bluetooth® enabled portable player
Registering a portable player in the Bluetooth® audio system allows the system to function. The following functions can be used for registered portable players:
Functions and operation procedures
Press and hold until “BT AUDIO”
is displayed.
Press (SETUP).
Select one of the following
functions using a voice command or 
.
• Registering a portable player “Pair Audio Players (Pair audio player)” • Selecting a portable player to be used “Select Audio Player” • Changing the registered name of a portable player “Change Name” • Listing the registered portable players “List Audio Players” • Changing the passkey “Set Passkey” • Deleting a registered portable player “Delete Audio Player”
Registering a portable player
Select “Pair Audio Players (Pair audio player)” using a voice command or 
, and perform the procedure for
registering a portable player.
Selecting a portable player to be used
Select “Select Audio Player”
using a voice command or .
Select the portable player to be
used by either of the following methods, and select “Confirm” using a voice command or :
a. Press the talk switch and say the name of the desired portable player.
b. Press the talk switch and say “List audio players”. When the name of the desired portable player is read aloud, press the talk switch.
Press the talk switch and say
“From car” or “From audio”, and select “Confirm” using a voice command or .
Vehicles with smart key system: If “From car” is selected, the portable player will be automatically connected whenever the “ENGINE START STOP” switch is in either ACCESSORY or IGNITION ON mode.
Vehicles without smart key system: If “From car” is selected, the portable player will be automatically connected whenever the engine switch is in either the “ACC” or “ON” position.
Changing the registered name of a portable player
Select “Change Name” using a
voice command or .
Select the name of the portable
player to be changed by either of the following methods, and select “Confirm” using a voice command or :
a. Press the talk switch and say the name of desired portable player.
b. Press the talk switch and say “List audio players”. When the name of the desired portable player is read aloud, press the talk switch.
Press the talk switch or select
“Record Name” using , and say the
new name.
Select “Confirm” using a voice
command or .
Listing the registered portable players
Select “List Audio Players” using a voice command or . The list of registered portable
players will be read aloud.
When listing is complete, the system returns to “BT Audio Setup”.
Pressing the talk switch while the name of a portable player is being read aloud selects the portable player, and the following functions will become available:
• Selecting a portable player: “Select Audio Player” • Changing a registered name: “Change Name” • Deleting a portable player: “Delete Audio Player”
Changing the passkey
Select “Set Passkey” using a
voice command or .
Press the talk switch, say a 4 to
8-digit number, and select “Confirm” using a voice command or .
When the entire number to be
registered as a passkey has been input, press
again.
Deleting a registered portable player
Select “Delete Audio Player”
using a voice command or .
Select the portable player to be
deleted by either of the following methods and select “Confirm” using a voice command or :
a. Press the talk switch and say the name of the desired portable player.
b. Press the talk switch and say “List audio players”. When the name of the desired portable player is read aloud, press the talk switch.
If the portable player to be deleted is paired as a Bluetooth® phone, the registration of the mobile phone can be deleted at the same time.
A voice guidance instruction to delete a mobile phone is heard.
Select “Confirm” using a voice
command or .
The number of portable players that can be registered
Up to 2 portable players can be registered in the system.
System setup items and operation procedures
Download Manual