Opening and closing the windows and moon roof
Power windows
The power windows can be opened and closed using the switches.
Operating the switch moves the windows as follows:
1. Closing
2. One-touch closing*
3. Opening
4. One-touch opening* *: Pushing the switch in the opposite direction will stop window travel partway.
Window lock switch
Press the switch down to lock the passenger window switches and back window switch.
Use this switch to prevent children from accidentally opening or closing a passenger window and back window.
The power windows can be operated when
Vehicles without a smart key system
The engine switch is in the “ON” position.
Vehicles with a smart key system
The “ENGINE START STOP” switch is in IGNITION ON mode.
Operating the power windows after turning the engine off
Vehicles without a smart key system
The power windows can be operated for approximately 45 seconds even after the engine switch is turned to the “ACC” or “LOCK” position. They cannot, however, be operated once either front door is opened.
Vehicles with a smart key system
The power windows can be operated for approximately 45 seconds even after the “ENGINE START STOP” switch is turned to ACCESSORY mode or turned off. They cannot, however, be operated once either front door is opened.
Jam protection function
If an object becomes caught between the window and the window frame, window travel is stopped and the window is opened slightly.
When the power window does not close normally
If the jam protection function is operating abnormally and a window cannot be closed, perform the following operations using the power window switch on the relevant door.
• After stopping the vehicle, the window can be closed by holding the power window switch in the one-touch closing position while the engine switch is turned to the “ON” position (vehicles without a smart key system) or the “ENGINE START STOP” switch is turned to IGNITION ON mode (vehicles with a smart key system).
• If the window still cannot be closed even by carrying out the operation explained above, initialize the function by performing the following procedure.
Hold the power window switch in
the one-touch closing position.
Continue holding the switch for a further 6 seconds after the window has closed.
Hold the power window switch in
the one-touch opening position.
Continue holding the switch for a further 2 seconds after the window has opened completely.
Hold the power window switch in
the one-touch closing position once again. Continue holding the switch for a further 2 seconds after the window has closed.
If you release the switch while the window is moving, start again from the beginning.
If the window continues to close but then re-open slightly even after performing the above procedure correctly, have the vehicle inspected by your Toyota dealer.
Customization that can be configured at Toyota dealer
Settings (e.g. linked door lock operation) can be changed.
(Customizable features )
CAUTION
Closing the windows
Observe the following precautions.
Failure to do so may result in death or serious injury.
• Check to make sure that all passengers do not have any part of their body in a position where it could be caught when a window is being operated.
• Do not allow children to operate the power windows.
Closing a power window on someone can cause serious injury, and in some instances, even death.
Jam protection function
• Never use any part of your body to intentionally activate the jam protection function.
• The jam protection function may not work if something gets caught just before the window fully closes.
Power back window
The power back window can be opened and closed using the switch or key.
From inside the vehicle
1. Closing
2. One-touch closing*
3. Opening
4. One-touch opening* *: Pressing the switch in the opposite direction will stop window travel partway.
From outside the vehicle (vehicles without a smart key system)
1. Opening
2. Closing
Turn the key fully and hold it.
From outside the vehicle (vehicles with a smart key system)
1. Opening (push and hold) 2. Closing (push and hold)
This operation can only be performed when the electronic key is within the detection range.
The power back window can be operated from inside the vehicle when
Vehicles without a smart key system
The engine switch is in the “ON” position.
Vehicles with a smart key system
The “ENGINE START STOP” switch is in IGNITION ON mode.
• The power back window can be opened when the rear window wiper is working, but the wiper stops working until the window is closed again.
If the power back window is not fully closed, the rear window wiper, washer, and defogger will not work.
• If the back door is not fully closed, the power back window cannot be opened using the switch located in the cabin. (It is still possible to close the window.)
• If the back door is opened while the power back window is opening or closing, window operation will stop.
The power back window can be operated from outside the vehicle when (vehicles with a smart key system
)
• The “ENGINE START STOP” switch is off.
• The back door is closed.
Operating the power back window from inside the vehicle after turning the engine off
Vehicles without a smart key system
The power back window can be operated for approximately 45 seconds even after the engine switch is turned to the “ACC” or “LOCK” position. It cannot, however, be operated once either front door is opened.
Vehicles with a smart key system
The power back window can be operated for approximately 45 seconds even after the “ENGINE START STOP” switch is turned to ACCESSORY mode or turned off. It cannot, however, be operated once either front door is opened.
Jam protection function
If an object becomes caught between the window and the window frame, window travel is stopped and the window is opened slightly.
When the power back window does not close normally
If the jam protection function is operating abnormally and a window cannot be closed, perform the following operations using the power back window switch.
• After stopping the vehicle, the window can be closed by holding the power back window switch in the one-touch closing position while the engine switch is turned to the “ON” position (vehicles without a smart key system) or the “ENGINE START STOP” switch is turned to IGNITION ON mode (vehicles with a smart key system).
• If the window still cannot be closed even by carrying out the operation explained above, initialize the function by performing the following procedure.
Hold the power back window
switch in the one-touch closing position.
Continue holding the switch for a further 6 seconds after the window has closed.
Hold the power back window
switch in the one-touch opening position.
Continue holding the switch for a further 2 seconds after the window has opened completely.
Hold the power back window
switch in the one-touch closing position once again. Continue holding the switch for a further 2 seconds after the window has closed.
If you release the switch while the window is moving, start again from the beginning.
If the window continues to close but then re-open slightly even after performing the above procedure correctly, have the vehicle inspected by your Toyota dealer.
Customization that can be configured at Toyota dealer
Settings (e.g. linked operation) can be changed.
(Customizable features )
CAUTION
Caution while driving
Keep the back door and back window closed while driving. If the back door or the back window is left open, the back door may hit nearby objects while driving or luggage may be unexpectedly thrown out, causing an accident.
In addition, exhaust gases may enter the vehicle, causing death or a serious health hazard. Make sure to close the back door and back window before driving.
Closing the power back window
Observe the following precautions.
Failure to do so may result in death or serious injury.
• Check to make sure that all passengers do not have any part of their body in a position where it could be caught when a window is being operated.
• Do not allow children to operate the power back window.
Closing a power back window on someone can cause serious injury, and in some instances, even death.
Jam protection function
• Never use any part of your body to intentionally activate the jam protection function.
• The jam protection function may not work if something gets caught just before the window fully closes.
Moon roof
Use the overhead switches to open and close the moon roof and tilt it up and down.
Opening and closing
1. Opens the moon roof* The moon roof stops slightly before the fully open position to reduce wind noise.
Press the switch again to fully open the moon roof.
2. Closes the moon roof* *: Lightly press the switch in either direction to stop the moon roof partway.
Tilting up and down
1. Tilts the moon roof up* 2. Tilts the moon roof down* *: Lightly press either of the moon roof switches to stop the moon roof partway.
The moon roof can be operated when
Vehicles without a smart key system
The engine switch is in the “ON” position.
Vehicles with a smart key system
The “ENGINE START STOP” switch is in IGNITION ON mode.
Operating the moon roof after turning the engine off
Vehicles without a smart key system
The moon roof can be operated for approximately 45 seconds even after the engine switch is turned to the “ACC” or “LOCK” position. It cannot, however, be operated once either front door is opened.
Vehicles with a smart key system
The moon roof can be operated for approximately 45 seconds even after the “ENGINE START STOP” switch is turned to ACCESSORY mode or turned off. It cannot, however, be operated once either front door is opened.
Jam protection function
If an object is detected between the moon roof and the frame while the moon roof is closing or tilting down, travel is stopped and the moon roof opens slightly.
To reduce moon roof wind noise
When the moon roof is opened automatically, it will stop slightly before the fully open position. Driving with the moon roof in this position can help reduce wind noise.
Sunshade
The sunshade can be opened and closed manually. However, the sunshade will open automatically when the moon roof is opened.
When the moon roof does not close normally
Perform the following procedure:
• If the moon roof closes but then re-opens slightly
Stop the vehicle.
Press and hold the “SLIDE
(open/close)” switch in the close position.* 1 The moon roof will close, reopen and pause for approximately 10 seconds.*2 Then it will close again, tilt up and pause for approximately 1 second. Finally, it will tilt down, open and close.
Check to make sure that the moon
roof is completely closed and then release the switch.
• If the moon roof tilts down but then tilts back up
Stop the vehicle.
Press and hold the “UP” switch*1
until the moon roof moves into the tilt up position and stops.
Release the “UP” switch once and
then press and hold the “UP” switch again.*1 The moon roof will pause for approximately 10 seconds in the tilt up position.*2 Then it will adjust slightly and pause for approximately 1 second. Finally, it will tilt down, open and close.
Check to make sure that the moon
roof is completely closed and then release the switch.
*1: If the switch is released at the incorrect time, the procedure will have to be performed again from the beginning.
*2: If the switch is released after the above mentioned 10 second pause, automatic operation will be disabled. In that case, press and hold the “UP” or “DOWN” switch, and the moon roof will tilt up and pause for approximately 1 second. Then it will tilt down, open and close. Check to make sure that the moon roof is completely closed and then release the switch.
If the moon roof does not fully close even after performing the above procedure correctly, have the vehicle inspected by your Toyota dealer.
Moon roof open reminder function
Vehicles without a smart key system
An alarm will sound when the driver’s door is opened with the moon roof not fully closed and the engine switch off.
Vehicles with a smart key system
An alarm will sound when the driver’s door is opened with the moon roof not fully closed and the “ENGINE START STOP” switch off.
Customization that can be configured at Toyota dealer
Settings (e.g. linked door lock operation) can be changed.
(Customizable features )
CAUTION
Opening the moon roof
Observe the following precautions.
Failure to do so may cause death or serious injury.
• Do not allow any passengers to put their hands or heads outside the vehicle while it is moving.
• Do not sit on top of the moon roof.
Closing the moon roof
Observe the following precautions.
Failure to do so may result in death or serious injury.
• Check to make sure that all passengers do not have any part of their body in a position where it could be caught when the moon roof is being operated.
• Do not allow children to operate the moon roof.
Closing the moon roof on someone can cause death or serious injury.
Jam protection function
• Never use any part of your body to intentionally activate the jam protection function.
• The jam protection function may not work if something gets caught just before the moon roof fully closes.
Download Manual