Electric Parking Brake
What Is the Electric Parking Brak
The electric parking brake is used to hold your vehicle on slopes and flat roads.
Applying the Electric Parking Brake
The electric parking brake switch is on the center console.
- Pull the switch up.
The red warning lamp flashes during operation and illuminates when the parking brake is applied.
Note: You can apply the electric parking brake when the ignition is off.
Note: The electric parking brake could apply when you shift into park (P).
Applying the Electric Parking Brake in an Emergency
You can use the electric parking brake to slow or stop your vehicle in an emergency.
Pull the switch up and hold it.
The red warning lamp illuminates, a tone sounds and the stoplamps turn on when you use the electric parking brake in an emergency.
The electric parking brake continues to slow your vehicle down unless you release the switch.
Note: Do not apply the electric parking brake when your vehicle is moving, except in an emergency. If you repeatedly use the electric parking brake to slow or stop your vehicle, you could cause damage to the brake system.
Manually Releasing the Electric Parking Brake
- Switch the ignition on.
- Press and hold the brake pedal.
- Push the switch down.
The red warning lamp turns off.
Pulling Away When Towing a Trailer Uphill
- Press and hold the brake pedal.
- Pull the switch upward and hold it.
- Shift into gear.
- Press the accelerator pedal until engine has developed sufficient torque to prevent your vehicle from rolling down the hill.
- Release the switch and pull away in a normal manner.
Automatically Releasing the Electric Parking Brake
- Close the driver door.
- Shift into gear.
- Press the accelerator pedal and pull away in a normal manner.
Electric Parking Brake Audible Warning
Sounds when the parking brake is on and your vehicle is moving. If the warning tone continues after you have released the parking brake, this indicates a malfunction. Have your vehicle checked as soon as possible.
ELECTRIC PARKING BRAKE – WARNING LAMPS
Brake System
It illuminates red when you apply the parking brake and your vehicle is on.If the lamp flashes when the parking brake has been released, this indicates the parking brake system requires service. Have your vehicle checked as soon as possible.
Note: Lamps may vary depending on region.
Electric Parking Brake
Note: Lamps may vary depending on region.
ELECTRIC PARKING BRAKE – INFORMATION MESSAGES
Park Brake
| Message | Action |
|---|---|
|
Park Brake Malfunction Service Now |
The electric parking brake has malfunctioned.Have your vehicle checked as soon as possible. |
|
Park Brake Not Released |
The electric parking brake has not released. Manually release the electric parking brake. If the message continues to appear, have your vehicle checked as soon as possible. |
|
Park Brake Not Applied |
The electric parking brake has not applied. Apply the electric parking brake.If the message continues to appear, have your vehicle checked as soon as possible. |
|
Park Brake Use Switch to Release |
The electric parking brake has not automatically released. Manually release the electric parking brake. |
|
To Release: Press Brake and Switch |
You have not pressed the brake pedal. Press the brake pedal to release the parking brake. |
|
Park Brake Limited Function Service Required |
The electric parking brake has malfunctioned.Have your vehicle checked as soon as possible. |
|
Park Brake System Overheated |
The electric parking brake has overheated. Wait for the electric parking brake to cool down. |
|
Park Brake Off |
The electric parking brake is released. |
|
Release Park Brake |
The electric parking brake has not released. Manually release the electric parking brake. If the message continues to appear, have your vehicle checked as soon as possible. |
|
Park Brake On |
The electric parking brake is applied. |
Download Manual