Disclaimer: Not affiliated with or endorsed by Toyota Motor Company. For informational purposes only. Full Disclaimer

2022 Toyota Sienna Owners Manual - Gauges and meters



Gauges and meters

The displayed content may differ depending on the type of meter.

  • Vehicles with monochrome display

Toyota Sienna. The displayed content may differ depending on the type of meter

 

  • Vehicles with color display

Toyota Sienna. The displayed content may differ depending on the type of meter

 

  1. Tachometer
    Displays the engine speed in revolutions per minute
  2. Multi-information display Presents the driver with a variety of driving-related data
  3. Speedometer
    Displays the vehicle speed
  4. Fuel gauge
    Displays the quantity of fuel remaining in the tan
  5. Odometer/trip meter display change button
  6. Outside temperature
  7. Odometer and trip meter display Odometer:
    Displays the total distance that the vehicle has been driven Trip meter:
    Displays the distance the vehicle has been driven since the meter was last reset. Trip meters “A” and “B” can be used to record and display different distances independently.
  8. Shift position and range
  9. Meter panel lights control button
  10. Engine coolant temperature gauge Displays the engine coolant temperature

Changing the trip meter display

Toyota Sienna. Changing the trip meter display

 

Pressing this button switches among the odometer, trip meter “A” and trip meter “B” displays.

When the trip meter is displayed, pressing and holding the button will reset the trip meter.

Meter panel light control

Toyota Sienna. Meter panel light control

 

The brightness of the meter panel lights can be adjusted.

Pressing the button will adjust the brightness of the meter panel lights.

The brightness level of the meters when the surroundings are bright (day mode) and dark (night mode) can be adjusted individually. However, when in day mode, adjusting the brightness level will also change the brightness level of night mode.

Outside temperature display

  • In the following situations, the correct outside temperature may not be displayed, or the display may take longer than normal to change.
  • When stopped, or driving at low speeds (less than 12 mph [20 km/h])
  • When the outside temperature has changed suddenly (at the entrance/ exit of a garage, tunnel, etc.)
  • The temperature range that can be displayed is from -40°F (-40°C) to 122°F (50°C).
  • Vehicles with monochrome display When the outside temperature drops below 37°F (3°C), the temperature display flashes 10 times.
  • Vehicles with color display When the outside temperature drops below 37°F (3°C), the ICE warning indicator will be displayed on the multi-information display.
  • When “--” or “E” is displayed, the system may be malfunctioning. Take your vehicle to your Toyota dealer.
NOTICE

To prevent damage to the engine and its components

  • Do not let the indicator needle of the tachometer enter the red zone, which indicates the maximum engine speed.
  • The engine may be overheating if the engine coolant temperature gauge is in the red zone (H). In this case, immediately stop the vehicle in a safe place, and check the engine after it has cooled completely.

Download Manual