Bulb Replacement
For the proper type of replacement bulbs, or any bulb changing procedure not listed in this section, contact your dealer.
After an HID headlamp bulb has been replaced, the beam might be a slightly different shade than it was originally. This is normal.
This vehicle has several LED lamps. For replacement of any LED lighting assembly, contact your dealer.
For the base and the uplevel taillamp assembly, only the back-up bulb is replaceable. Removal of the taillamp assembly is not necessary to change this bulb.
To replace one of these bulbs:
Open the trunk. See Trunk
0 22.
Remove the three pushpin fasteners and cover.
Turn the bulb socket counterclockwise to remove it.
Pull the old bulb straight out of the bulb socket.
Push the new bulb straight into the bulb socket until it clicks.
Turn the bulb socket clockwise to reinstall.
Install the three pushpin fasteners and cover.
To replace one of these bulbs:
Unclip the license plate lamp from the fascia opening.
Pull the license plate lamp down through the fascia opening.
Turn the bulb socket counterclockwise and pull the bulb straight out of the lamp socket.
Install the new bulb.
Push the bulb straight into the socket and turn clockwise to reinstall.
Reinstall the license plate lamp by lifting it through the fascia opening until the clip is in place.
Download Manual