Wiper Operation
The windshield wipers and washers can be used when the vehicle is on.
- Front Wipers
- Headlight Integration with Wipers
- Intermittent (INT) Wipers(*1)
- Automatic Intermittent Wipers(*1)
Parent topic: Vehicle Controls
■Front Wipers
Move the wiper lever up or down to the desired position.
Parent topic: Wiper Operation
■Headlight Integration with Wipers
When the headlights are in the AUTO position, they automatically turn on when the front wipers operate several times within a certain interval. The headlights turn off shortly after the wipers are turned off or if there is enough ambient light.
Parent topic: Wiper Operation
■Intermittent (INT) Wipers
When you move the lever to the INT position, the wipers operate based on the delay adjustment.
Rotate the adjustment ring to adjust the wiper delay.
Parent topic: Wiper Operation
■Automatic Intermittent Wipers
When you push the lever down to AUTO, the windshield wipers sweep once, and go into the automatic mode.
The wipers operate intermittently, at low speed, or at high speed and stops in accordance with the amount of rainfall the rainfall sensor detects.
Turn the washers off if no washer fluid comes out. The pump may get damaged.AUTO should always be turned OFF before the following situations in order to prevent severe damage to the wiper system:
- Cleaning the windshield
- Driving through a car wash
- No rain present
Parent topic: Wiper Operation
Download Manual