Adaptive Cruise Control
with Low Speed Follow (ACC with Low Speed Follow)
Helps maintain a constant vehicle speed and a set following interval behind a vehicle detected ahead of yours and, if the detected vehicle comes to a stop, can decelerate and stop your vehicle, without you having to keep your foot on the brake or the accelerator. When ACC with Low Speed Follow slows your vehicle by applying the brakes, your vehicle's brake lights will illuminate.
A vehicle that moves without operator control can cause a crash, resulting in serious injury or death.
Never exit a vehicle when the vehicle is stopped by ACC with LSF.
- Activating and Setting the Vehicle Speed
- Adjusting the Vehicle Speed
- Adjusting the Vehicle Distance
- During Operation
- Canceling ACC with Low Speed Follow
- Switching to Standard Cruise Control
■Activating and Setting the Vehicle Speed
- Press the MAIN button. The ACC indicator appears.
- Accelerate to the desired speed.
Above 25 mph (40 km/h): Take your foot off the pedal and press RES/+/SET/- to set the speed.
Below 25 mph (40 km/h) (Low Speed Follow): Press SET/- to set the speed at 25 mph (40 km/h).
■Adjusting the Vehicle Speed
Each time you press the switch up or down, the vehicle speed is increased or decreased by about 1 mph (1 km/h). If you keep the switch pressed up or down, the vehicle speed increases or decreases by 5 mph or 5 km/h until you release it.
■Adjusting the Vehicle Distance
■During Operation
Always be prepared to apply the brake pedal when conditions require.
■Canceling ACC with Low Speed Follow
Certain conditions may cause ACC to cancel automatically. When this happens, a beep sounds and a message appears on the multi-information display.
After cruise control has been canceled, you can still resume the prior set speed by pressing the RES/+ switch.
Press the MAIN button to turn the system off.
Use ACC with Low Speed Follow only when driving on expressways or freeways and in good weather conditions.
■Switching to Standard Cruise Control
Press and hold the Interval button for one second.
Cruise Mode Selected appears in the multi-information display for two seconds, and then the mode switches to Cruise.
Press and hold the interval button for one second to switch back to ACCwith Low Speed Follow. ACC Mode Selected appears on the multi-information display for two seconds.
Download Manual