Steering wheel audio remote control switch (if so equipped)
The remote control switches are located on the rear surface of the steering wheel. Reach behind the wheel to access the switches. These switches can be used when the ignition switch is in the “ON” or “ACC” position.
NOTE ● Do not push two or more of the steering wheel remote
control switches at the same time. To turn on the power PWR ON/OFF button — 4
When the power is off, press this button to turn the power on. To turn the power off, press this button for 2 seconds or longer. To adjust the volume Volume up button — 2
The volume will increase when this button is pressed. Volume down button — 6
The volume will decrease when this button is pressed. To listen to the audio system
Select the desired mode by lightly pressing the Mode change button (4). The mode switches between the radio and CD with each push of the button. To listen to the radio To select AM/FM/SAT mode Mode change button — 4
Select the desired band by pressing this button. The order is: AM → FM1 → FM2 (SAT1 → SAT2 → SAT3 → SAT4) → CD → AM.
1- Seek up/Track up/Fast-forward button 2- Volume up button 3- Preset change/Folder up/Disc up button 4- PWR (ON/OFF)/Mode change button 5- Seek down/Track down/Fast-reverse button 6- Volume down button
Comfort controls
Automatic radio tuning Seek up button — 1/Seek down button — 5
After pressing these buttons, reception of the selected station will begin. Category selection (vehicle with satellite radio) Seek up button — 1/Seek down button — 5
Keep one of the buttons pressed to scan through the categories. When your desired category is reached, release the button. To select the preset memory Preset change button — 3
When the radio is on and this button is pressed, the preset sta- tion frequencies are sequentially selected each time the button is pressed; 1, 2, 3, 4, 5, 6, 1, 2 etc. To listen to a CD To select a desired track Track up button —1
Press the button repeatedly until the desired track number appears on the display. Track down button —5
Press the button repeatedly until the desired track number appears on the display.
To fast-forward/fast-reverse the disc (Type 1 and Type 2 audio system only)
To fast-forward or fast-reverse the disc, press the fast-forward button (1) or the fast-reverse button (5). Fast-forward button —1
You can fast-forward the disc by pressing the fast-forward but- ton. While the button is kept pressed, the disc will be fast-for- warded. Fast-reverse button —5
You can fast-reverse the disc by pressing the fast-reverse but- ton. While the button is kept pressed, the disc will be fast- reversed. To select a desired disc (CD autochanger only) Disc up button — 3
This function can be used only while a music CD is being played. Press this button until the desired disc is reached. To select a desired folder (MP3 CDs only) Folder up button — 3
Press this button until the desired folder is reached.
Download Manual