AM/FM electronically tuned radio with CD autochanger-Type 2 (if so equipped)
Volume and tone control panel-Type 2, Type 3
1- PWR (On-Off) switch 2- VOL (Volume control) knob 3- Memory select buttons 4- AUDIO switch 5- Display
Comfort controls
To adjust the volume
VOL (Volume control)
Turn the VOL knob (2) clockwise to increase the volume; counterclockwise to decrease the volume. The status will be displayed in the display (5).
NOTE ● The volume control mode will shut off automatically if
either the radio or CD is selected, or if no adjustment is made within about 2 seconds.
Comfort controls
To adjust the tone
1. Press the AUDIO switch (4) repeatedly to select your desired sound customization setting to change. The order is: SUB PUNCH → BASS → MID → TRE → FADE → BAL → FIELD → TYPE → SOUND PRESET → Sound customization mode off. The status will be displayed in the display (5).
QUICK ACCESS MODE
To access the sound customization features quickly, push and hold the AUDIO switch (4), then turn the switch clockwise or counterclockwise to access your desired sound customization setting. Release the switch to adjust the setting.
Comfort controls
2. Turn the AUDIO switch (4) either clockwise or counter- clockwise to adjust the sound customization features.
SUB PUNCH (Subwoofer tone control)
To select the desired subwoofer PUNCH level.
BASS (Bass tone control)
To select the desired bass level.
MID (Midrange tone control)
To select the desired midrange level.
TRE (Treble tone control)
To select the desired treble level.
FADE (Front/Rear balance control)
To balance the volume from the F (front) and the R (rear) speakers.
BAL (Left/Right balance control)
To balance the volume from the L (left) and the R (right) speakers.
FIELD (Sound field type select)
To select the desired sound field.
Mode Adjusting operation
Clockwise Counterclockwise SUB PUNCH Increase Decrease
BASS Increase Decrease MID Increase Decrease TRE Increase Decrease
FADE More sound from the rear speakers
More sound from the front speakers
BAL More sound from the right speakers
More sound from the left speakers
FIELD NORMAL →
STAGE → LIVE → HALL
HALL → LIVE→ STAGE → NOR-
MAL
TYPE NORMAL → POP → ROCK → HIP-
HOP → COUNTRY COUNTRY→ HIP- HOP → ROCK → POP → NORMAL
SOUND PRESET — —
Sound field type Description NORMAL Optimized for the Rockford Fosgate high
bass output.
STAGE Places the image of a sound stage in front of the driver with the vocalist in the center (for driver only).
LIVE Front seat occupants are surrounded by sound from front and rear speakers.
HALL
Places the image of a sound stage in front of the driver with the vocalist in the center (for driver only). Sound reflections are added to the rear speakers to simulate the experience of being at a concert hall. Best with classical or vocalist music.
Comfort controls
TYPE (Music type select)
To select the desired music type.
SOUND PRESETS (sound setting storage)
6 different sound settings can be stored into memory in the “SOUND PRESET” mode. For example:
To store your current sound settings into memory, follow these steps:
1. Go to the “SOUND PRESET” setting (preset button lights will be flashing).
2. Push one of the memory select buttons (3) for more than 2 seconds.
To recall the sound settings that are stored in memory, follow these steps:
1. Go to the “SOUND PRESET” setting (preset button lights will be flashing).
2. Push your desired memory select button (3) for less than 2 seconds.
NOTE ● The sound customization adjust mode will automatically
shut off when either the radio or CD is selected, or if no adjustment is made within 10 seconds.
● If the AUDIO switch (4) is pushed and held for more than 2 seconds during the audio adjust mode, it will change to “Hold” mode. The selected audio mode will be held until the AUDIO switch (4) is pushed for more than 2 seconds again.
Music type Description NORMAL Sounds good for all types of music.
POP Tight bass and high frequency sound ROCK Tuned for hard rock and heavy metal with
powerful drums, guitars, and vocals. HIP-HOP Deep bass punch and well-defined vocals
COUNTRY Enhanced main vocals
Settings Preset 1 Preset 2 Preset 3 SUB PUNCH Punch 3 Punch 5 Punch 4
BASS +1 0 0 MID 0 0 0 TRE +2 +1 0
FADE 0 0 0 BAL 0 0 0
FIELD Live Normal Stage TYPE POP HIP-HOP Rock
Comfort controls
Speed Compensated Volume function
Speed Compensated Volume function is a feature that automat- ically adjusts the VOL, BASS, MID, and TRE settings in accordance with the vehicle speed. It is possible to turn this function ON-OFF using the following methods:
1. If you are presently pushing the AUDIO switch (4) and making a tone adjustment, finish making the tone adjust- ment.
2. Push the AUDIO switch for at least about 2 seconds. The system will switch to MENU mode and the characters “SCV Select” will be shown on the display.
3. Turn the AUDIO switch (4) clockwise to turn the function ON. Turn it counterclockwise to turn the function OFF.
NOTE ● The MENU mode will automatically shut off when either
the radio or CD is selected or the user does not move any of the switches for 10 seconds.
Comfort controls
Radio control panel and display-Type 2
1- PWR (On-Off) switch 2- Memory select buttons 3- RADIO (AM/FM selection) button 4- SEEK (Up-seek) button 5- SEEK (Down-seek) button 6- SCAN button 7- TUNE/FOLDER switch 8- SCAN indicator 9- AM/FM (AM/FM1/FM2) indicator
10- Preset memory number display 11- ST (Stereo) indicator 12- Frequency display
Comfort controls
To listen to the radio
1. Press the PWR switch (1) to turn the audio system on and off. The system turns on in the last mode used.
2. Press the RADIO button (3) to select the desired band (AM/FM1/FM2).
3. Press the SEEK button (4 or 5) to tune to a station, or press one of the memory select buttons (2) to tune in to a station memorised for that button.
To tune the radio Automatic tuning
1. After pressing the SEEK button (4 or 5), reception of the selected station will begin.
2. Press the SCAN button (6). SCAN indicator (8) will come on and the radio will tune consecutively to each available station for about 5 seconds per station. If you want to stop scanning, press the SCAN button again. The frequency display of the current station blinks once per second during SCAN.
Manual tuning
The frequency changes every time the TUNE/FOLDER switch (7) is turned. Turn the switch to select the desired station. To enter frequencies into the memory
As many as 6 AM and 12 FM stations can be entered into the memory.
To store a frequency in the memory, follow these steps: 1. Press the SEEK button (4 or 5), or turn the
TUNE/FOLDER switch (7) to tune to the frequency you wish to keep in the memory.
2. Press one of the memory select buttons (2) until it beeps. The sound will be momentarily interrupted while the fre- quency is being entered into the memory. The number of the button matching the entry in the memory as well as the frequency are displayed.
3. The preset memory setting is retrieved by pressing the button and then releasing it within about 2 seconds.
NOTE ● Disconnecting the battery cables erases all the radio sta-
tions settings stored in the memory.
Comfort controls
Radio control panel and display-Type 3
1- PWR (On-Off) switch 2- Memory select buttons 3- RADIO (AM/FM/Satellite selection) button 4- SEEK (Up-seek) button 5- SEEK (Down-seek) button 6- SCAN button 7- TUNE/FOLDER switch 8- SCAN indicator 9- AM/FM/SAT (AM/FM1/FM2/SAT1/SAT2/SAT3/SAT4)
indicator 10- Preset memory number display 11- ST (Stereo) indicator 12- Frequency display
Comfort controls
To listen to the radio
1. Press the PWR switch (1) to turn the audio system on and off. The system turns on in the last mode used.
2. Press the RADIO button (3) to select the desired band (AM/FM1/FM2/SAT1/SAT2/SAT3/SAT4).
3. Press the SEEK button (4 or 5) to tune to a station, or press one of the memory select buttons (2) to tune in to a station memorised for that button.
To tune the radio Automatic tuning
1. After pressing the SEEK button (4 or 5), reception of the selected station will begin.
2. Press the SCAN button (6). SCAN indicator (8) will come on and the radio will tune consecutively to each available station for about 5 seconds per station. If you want to stop scanning, press the SCAN button again. The frequency display of the current station blinks once per second during SCAN.
Manual tuning
The frequency changes every time the TUNE/FOLDER switch (7) is turned. Turn the switch to select the desired station. To enter frequencies into the memory
As many as 6 AM, 12 FM and 24 SAT stations can be entered into the memory.
To store a frequency in the memory, follow these steps: 1. Press the SEEK button (4 or 5), or turn the
TUNE/FOLDER switch (7) to tune to the frequency you wish to keep in the memory.
2. Press one of the memory select buttons (2) until it beeps. The sound will be momentarily interrupted while the fre- quency is being entered into the memory. The number of the button matching the entry in the memory as well as the frequency are displayed.
3. The preset memory setting is retrieved by pressing the button and then releasing it within about 2 seconds.
NOTE ● Disconnecting the battery cables erases all the radio sta-
tions settings stored in the memory.
Comfort controls
SIRIUS Satellite Radio control panel and display-Type 3
1. PWR (On-Off) switch 2. RADIO (AM/FM/Satellite selection) button 3. SEEK (Down-seek) button 4. SEEK (Up-seek) button 5. SCAN button 6. TUNE/FOLDER (Category selection) switch/AUDIO switch 7. Memory select buttons 8. Display 9. Preset memory number display
10. Channel number 11. SCAN indicator
Comfort controls
To listen to SIRIUS Satellite Radio
1. If the audio system is OFF, turn it ON by pushing the PWR switch (1). The audio system will start working in the previously used mode. Push the RADIO button (2) to turn ON the radio.
2. Push the RADIO button (2) to select your desired band (SAT1/SAT2/SAT3/SAT4). Each time you push the but- ton, the indication will change to the next one in the fol- lowing sequence: AM → FM1 → FM2 → SAT1 → SAT2 → SAT3 → SAT4. When “SIRIUS” has appeared on the display, the radio will receive satellite radio.
Category selection
1. Turn the TUNE/FOLDER switch (6) to activate the cate- gory selection mode. The category number (CAT1 to CAT12) of the channel currently being received will be indicated.
2. Turn the TUNE/FOLDER switch (6) to select your desired category.
NOTE ● Even when categories are changed, the currently selected
channel does not change. To select your desired channel, use the SEEK button (3 or 4).
● If you do not operate any switch for 15 seconds, the cate- gory selection mode will be cancelled.
Channel selection
Push the SEEK button (3 or 4) to select a channel. NOTE
● While the system is in category selection mode, only the channels in the currently selected category can be selected.
Scan function
1. If you push the SCAN button (5), the system will select receivable channels one by one, receiving each one for about 7 seconds.
2. To cancel the SCAN mode, push the SCAN button (5) once more.
NOTE ● While the system is in category selection mode, only channels in the currently selected category are scanned.
To store a channel in memory
It is possible to store one channel for each memory select but- tons (7) in memory. (It is possible to store a maximum of 24 channels in memory.) Store a channel in memory using the fol- lowing procedure:
1. Push the SEEK button (3 or 4) to select the channel you wish to store in memory.
2. Store the channel in memory by pushing one of the mem- ory select buttons (7) until you hear a beep.
Comfort controls
NOTE ● Once you have stored channels in memory, you can instantly call up a desired channel by just pushing the cor- responding memory select buttons (7).
SIRIUS ID indication
If you push the SEEK button (3 or 4) to select “CH 0”, the SIR- IUS ID will be indicated.
1. If you select “CH 0”, the first 4 digits of the 12-digit SIR- IUS ID will be indicated 2 seconds later.
2. Turn the AUDIO switch (6) clockwise to view the next 4 digits. If you turn it clockwise while the last 4 digits are indicated, the first four digits will be indicated again. If you turn the AUDIO switch counterclockwise, indications will be given in the opposite sequence. The indications are given in the following sequence: first 4 digits ↔ middle 4 digits ↔ last 4 digits.
3. To stop the SIRIUS ID indication, push the SEEK button (3 or 4) to select a channel other than “CH 0”.
NOTE ● If you wait 15 seconds without operating any switch while
the SIRIUS ID is being indicated, the indication will change to “CH 0”. 2 seconds later, the SIRIUS ID will again be indicated.
Comfort controls
To skip or lock a desired channel using the MENU mode
It is possible to make a setting to skip or lock a desired channel during channel selection.
1. If you push the AUDIO switch (6) for at least about 2 sec- onds while the system is receiving a satellite radio chan- nel, the system will switch to MENU mode.
2. In the MENU mode, satellite radio channel SKIP setting and LOCK setting and Speed Compensated Volume func- tion (refer to “Speed Compensated Volume function” on page 5-44) is possible. Each time you push the AUDIO switch (6), the status will change to the next one in the following sequence: “SCV Select” (Speed Compensated Volume function) → “SKIP setting” (the SKIP setting mode) → “LOCK setting” (the LOCK setting mode) → Menu mode off
NOTE ● The MENU mode will automatically shut off when either
the radio or CD is selected or the user does not move any of the switches for 10 seconds.
● SKIP settings, LOCK settings, and the lock cancellation code are stored in memory. If a battery cable is discon- nected, they will be erased. (The code will return to the “1111” that was set at the factory.)
SKIP setting (SKIP setting mode)
It is possible to set a channel to be skipped during channel selection. It is also possible to cancel a skip setting. By turning the AUDIO switch (6), you can select “SKIP” or “ALL UNSKIP”. These functions are described below.
LOCK setting (LOCK setting mode)
It is possible to lock a channel. It is also possible to cancel a lock setting. By turning the AUDIO switch (6), you can select “CH LOCK” (or “UN LOCK”), “UN LOCK AL”, or “CODE EDIT”. These functions are described below:
NOTE ● When the channel that is currently being received is not
locked, you can select “CH LOCK”. When the channel that is currently being received is locked, you can select “UN LOCK”.
SKIP : Sets the channel that is currently being received to be skipped.
ALL UNSKIP : Cancels all channel skip settings.
CH LOCK : Sets the channel that is currently being received to be locked.
UN LOCK : Sets the channel that is currently being received to be unlocked.
UN LOCK AL : Cancels all channel lock settings. CODE EDIT : Changes the lock cancellation code.
Comfort controls
To skip a desired channel
It is possible to set a channel to not be received during channel selection.
1. Select the channel you wish to be skipped. 2. Push the AUDIO switch (6) for at least about 2 seconds to
select the MENU mode. Then select the SKIP setting mode.
3. In the SKIP setting mode, turn the AUDIO switch (6) to select “SKIP”.
4. Push the AUDIO switch (6) to set the channel that is cur- rently being received to be skipped. When you have made the setting, the system will return to the SKIP setting mode. (The display will show “SKIP setting” after show- ing “STORED”.)
NOTE ● Any channel for which a skip setting has been made is
automatically skipped during channel selection. ● A channel that is stored in the preset memory is also
skipped during channel selection. If you push the corre- sponding memory select buttons (7) to call up the channel, the display will show “SKIPD” and the audio will be muted.
To cancel skip settings
It is possible to cancel channel skip settings. 1. Push the AUDIO switch (6) for at least about 2 seconds to
select the MENU mode. Then select the SKIP setting mode.
2. In the SKIP setting mode, turn the AUDIO switch (6) to select “ALL UNSKIP”.
3. Push the AUDIO switch (6). All channel skip settings will be cancelled. Then, the system will return to the SKIP set- ting mode. (The display will show “SKIP setting” after showing “STORED”.)
To lock a desired channel
It is possible to lock a desired channel so that it cannot be selected.
1. Select the channel you wish to lock. 2. Push the AUDIO switch (6) for at least about 2 seconds to
select the MENU mode. Then select the LOCK setting mode.
3. In the LOCK setting mode, turn the AUDIO switch (6) to select “CH LOCK”.
4. Push the AUDIO switch (6). The channel currently being received will be locked. Then, the system will return to the LOCK setting mode.
NOTE ● If you attempt to select a locked channel, the display will
show “LOCKED”. ● Channels stored in the preset memory are also locked.
Comfort controls
To unlock locked channels
You can unlock one or all locked channels. Unlocking one or more channels requires entry of the code. NOTE
● The code is set to “1111” at the factory. ● It is possible to change the code to any desired number
using “CODE EDIT”. 1. If you wish to unlock a single desired channel, select the
channel you wish to unlock. (If you wish to unlock all locked channels, it doesn’t matter which channel you select.)
2. Push the AUDIO switch (6) for at least about two seconds to select the MENU mode. Then select the LOCK setting mode.
3. In the LOCK setting mode, turn the AUDIO switch (6) to select “UN LOCK” if you wish to unlock a single desired channel or “UN LOCK AL” if you wish to unlock all locked channels.
4. Push the AUDIO switch (6). The code entry window will display.
5. Use the memory select buttons (7) to enter the code (1111 to 6666).
6. If you entered the correct code, the channel lock setting will be cancelled and the system will return to the LOCK setting mode. If you entered an incorrect code, a warning sound will be emitted and “CODE E” will be displayed. Then, the code entry window will again display. You can retry the code entry any number of times.
Comfort controls
To change the lock cancellation code
It is possible to change the code for lock cancellation to any desired number.
1. Push the AUDIO switch (6) for at least about 2 seconds to select the MENU mode. Then select the LOCK setting mode.
2. In the LOCK setting mode, turn the AUDIO switch (6) to select “CODE EDIT”.
3. Push the AUDIO switch (6). The code entry window will display.
4. Use the memory select buttons (7) to enter the current code (the code prior to the change).
5. If you entered the correct code, the code entry window will again be shown. Enter your desired code. If you entered an incorrect code, a warning sound will be emitted and “CODE E” will be displayed. Then, the code entry window will again be shown. You can retry the code entry any number of times.
6. After entering the new code, push the AUDIO switch (6). The code entry window will again be shown for confirma- tion. Enter the new code again, then push the AUDIO switch (6).
7. The code will be changed, and the system will return to the LOCK setting mode.
NOTE ● The code is stored in memory. If a battery cable is discon-
nected, such settings will be erased. (The code will return to the “1111” that was set at the factory.)
To reset the lock cancellation code
In case you forget the code, it is possible to reset the code to the “1111” that was set at the factory.
1. With the audio power OFF, push the PWR switch (1) and AUDIO switch (6) simultaneously. The display will show “CODE INITIAL”.
2. Push the AUDIO switch (6). The display will show “YES”. If you wish to reset the code, push the AUDIO switch (6) again. If you do not wish to reset the code, turn the AUDIO switch (6) so the display shows “CANCEL” and then push the AUDIO switch (6) again.
Comfort controls
CD control panel and display-Type 2, Type 3
1- PWR (On-Off) switch 2- LOAD/EJECT button 3- Disc loading slot 4- DISC select buttons 5- RADIO (AM/FM selection) button 6- CD (CD mode changeover) button 7- TRACK (Track up) button 8- TRACK (Track down) button 9- RPT/RDM (Repeat/Random) button
10- SCAN button 11- TUNE/FOLDER switch 12- RPT (Repeat-mode) indicator 13- RDM (Random-mode) indicator 14- SCAN indicator 15- CD indicator
16- DISC indicator 17- TRACK indicator 18- Track play time display
Comfort controls
To listen to a CD
1. Press the CD button (6) and the CD mode will be selected, starting a playback.
NOTE ● As many as 6 CDs can be inserted into the CD
autochanger. 2. To adjust the volume and tone, refer to “To adjust the vol-
ume” on page 5-40 and “To adjust the tone” on page 5-41. 3. To stop the CD, turn off the power by pressing the PWR
switch (1) or switch to the other mode by pressing the RADIO button (5).
NOTE ● For information concerning the handling of the compact
discs, refer to “Handling of compact discs” on page 5-71.
To set a disc
The indicator light (A) shows the condition of each CD slot.
To set a disc: 1. Press the LOAD/EJECT button (2). 2. Press one of the Disc select buttons (4) to select the CD
which you wish to insert. 3. If there is already a CD loaded in the slot, the CD is auto-
matically ejected. If there is no CD, insert the CD in the slot (3) after the READY light (B) illuminates.
Light off: No disc Amber: CD is set Green: CD is played (or selected)
Comfort controls
NOTE ● When the first CD has played to the end, the second CD
will start to play automatically. When the second, third, fourth, fifth, and sixth CDs have each played to the end, the sequence will begin again from the first CD.
To listen an MP3 CD
This autochanger allows you to play MP3 (MPEG Audio Layer-3) files recorded on CD-ROMs, CD-Rs (recordable CDs), and CD-RWs (rewritable CDs) in ISO9660 Level 1/Level 2, Joliet, and Romeo formats. Each disc may have a maximum of 16 trees, 100 folders, and 255 files per disc.
Push the CD button (6) if MP3 CDs are already in the autochanger. The display show “FILE READING”, then playback will begin. The folder number and the track number will appear on the display.
Comfort controls
NOTE ● While listening to a disc on which CD-DA (CD-Digital
Audio) and MP3 files have both been recorded, you can switch between reading of the CD-DA and reading of the MP3 files, and the external audio input mode by pressing the CD button for 2 seconds or longer (until you hear a beep).
● With a disc that contains both CD-DA and MP3 files, the CD-DA files are automatically played first.
● The playback sound quality differs depending on the encoding software and the bit rate. For details, refer to the user manual of your encoding software.
● Depending on file/folder configurations on a disc, it may take some time before playback starts.
● MP3 encode software and writing software are not sup- plied to this unit.
● You may encounter trouble in playing an MP3 recorded with certain writing software or CD recorders (CD-R/RW drivers).
● If you record too many folders or files other than MP3 onto a disc, it may take some time before playback starts.
● This unit does not record MP3 files. ● For information concerning CD-Rs/RWs, refer to “Notes
on CD-Rs/RWs” on page 5-73.
Folder selection order/MP3 file playback order (Example)
CAUTION! ● Attempting to play a file not in the MP3 format
which has the “.mp3” file name may produce noise from the speakers and speaker damage, and can damage your hearing.
Folder selection
In the order File selection
In the order
Root folder (root directory)
Tree 1 Tree 2 Tree 3 Tree 4
Comfort controls
To fast forward/reverse the disc
To fast forward or reverse, use the TRACK button (7 or 8).
Fast forward
You can fast forward by holding down the side of the TRACK button (7) for more than about 1 second.
Fast reverse
You can fast reverse by holding down the side of the TRACK button (8) for more than about 1 second.
To select a desired folder (MP3 CDs only)
You can select your desired folder by turning the TUNE/FOLDER switch (11).
Folder up
Turn the TUNE/FOLDER switch (11) clockwise until the desired folder number appears on the display.
Folder down
Turn the TUNE/FOLDER switch (11) counterclockwise until the desired folder number appears on the display.
Comfort controls
To select a desired track
You can select by using the TRACK button (7 or 8).
Track up
Press the side of the TRACK button (7) until the desired track is reached. The TRACK indicator (17) will display the number of the selected track.
Track down
Press the side of the TRACK button (8) until the desired track is reached. The TRACK indicator (17) will display the number of the selected track. NOTE
● Pressing the side of the TRACK button (8) once during the song will cause the CD to restart playing from the beginning of the song.
To repeat the same track or change the order of tracks for playback
Press the RPT/RDM button (9) to select RPT → RDM → RPT/RDM mode off.
To repeat the same track
Select the RPT mode, and the RPT indicator (12) will come on. You can listen to the same track repeatedly. NOTE
● The track repeat mode will be canceled by pressing the TRACK button (7 or 8), the SCAN button (10) or the LOAD/EJECT button (2).
● With a disc that contains both CD-DA and MP3 files, the repeat mode causes only files of the same format (CD-DA only or MP3 files only) to be repeated.
To change the order of tracks for playback Random playback for all discs in the autochanger (music CDs only)
Select the RDM mode, and the RDM indicator (13) will come on. Tracks are randomly selected from all discs loaded in the autochanger.
Comfort controls
Random playback for all folders on a disc (MP3 CDs only)
Select the RDM mode, and the RDM indicator (13) will come on. Tracks from all the folders on the currently selected disc will be played in a random sequence. NOTE
● In the all discs random mode, if an MP3 CD has been loaded in the autochanger, the autochanger will skip over it to the next music CD.
● With a disc that contains both CD-DA and MP3 files, the random mode causes only files of the same format (CD- DA only or MP3 files only) to be played in a random sequence.
RPT
RDM
Mode off
Comfort controls
To find the start of each track on a disc for playback
Press the SCAN button (10). “SCAN” will appear on the dis- play and the autochanger will play back the first 10 seconds of each track on the selected disc. The track number will blink while the scan mode is selected. To exit the scan mode, press the SCAN button again. NOTE
● Once all tracks on the disc have been scanned, playback of the disc will restart from the beginning of the track that was playing when scanning started.
● The scan mode will be canceled when radio or CD opera- tion is selected.
● With a disc that contains both CD-DA and MP3 files, the scan mode causes only files of the same format (CD-DA only or MP3 files only) to be played.
To eject a disc
Press the LOAD/EJECT button (2). Then press one of the DISC select buttons (4) to select the CD which you would like to eject. NOTE
● When any CD is ejected, the system automatically switches from CD mode to radio mode.
Download Manual