Maintenance and inspection of seat belts
The seat belt webbing may be cleaned with mild soap or deter- gent solution. Do not use an organic solvent. Allow the belts to dry in the shade. Do not allow them to retract until completely dry. Do not attempt to bleach or re-dye the belts. The color may rub off and the webbing strength may be affected. Regularly check your seat belt buckles and their release mech- anisms for positive engagement and release of the latch plate. Check the retractors for automatic locking when in the Auto- matic Locking Retractor function. The entire seat belt assembly should be replaced if the webbing shows any obvious cuts, tears, increase in thickness in any sec- tion of the webbing from broken fibers, or severe fading from sunlight. All of these conditions indicate a weakening of the belt, which may adversely affect seat belt performance in an accident.
WARNING! ● Any child who is too small to properly wear a seat
belt must be properly restrained in an appropriate child restraint system, to reduce their risk of serious injury or death in an accident.
● A child should never be left unattended in, or unsu- pervised, around your vehicle. When you leave the vehicle always take the child out as well.
● Children can die from heat stroke if left or trapped inside the vehicle, especially on hot days.
● Keep your vehicle locked and the trunk (ECLIPSE SPYDER) closed when not in use. Keep your vehicle keys away from children.
● For ECLIPSE SPYDER, never allow children to play in the trunk of your vehicle.
WARNING! ● Do not attempt to repair or replace any part of the
seat belt assemblies. This work should be done by an authorized Mitsubishi Motors dealer. Failure to have an authorized Mitsubishi Motors dealer per- form the work could reduce the effectiveness of the belts and could result in a serious injury or death in an accident.
Download Manual