LCD display
LCD Display Control
The LCD display modes can be changed by using the control buttons.
1. 
: MODE button for changing modes
2. 
/ : MOVE switch for changing items
3. 
: SELECT/RESET button for setting or resetting the selected item
LCD display modes
Trip computer mode
The trip computer mode displays information related to vehicle driving parameters including fuel economy, tripmeter information and vehicle speed.
❈ For more details, refer to “Trip Computer” on page 4-62.
Turn By Turn (TBT) mode
This mode displays the state of the navigation.
Assist mode
This mode displays the state of :
- Lane Safety system
- Driver Attention Warning (DAW)
- Smart Cruise Control with Stop & Go
- Tire pressure
Master warning mode
This warning light informs the driver the following situations.
- LED headlamp malfunction (if equipped)
- Forward Collision-Avoidance Assist system malfunction (if equipped)
- Forward Collision-Avoidance Assist radar blocked (if equipped)
- Blind-Spot Collision Warning system malfunction (if equipped)
- Blind-Spot Collision Warning radar blocked (if equipped)
- Smart Cruise Control with Stop & Go malfunction (if equipped)
- Smart Cruise Control with Stop & Go radar blocked (if equipped)
- Lamp malfunction
- High Beam Assist malfunction (if equipped)
At this time, a Master Warning icon (
) will appear beside the User Settings icon (
), on the LCD display. If the warning situation is solved, the master warning light will be turned off and the Master Warning icon will disappear.
Transmission temperature gauge (for dual clutch transmission)
This mode displays the transmission temperature.
User settings mode
In this mode, you can change the settings of the instrument cluster, doors, lamps, etc.
1. Head-up display
2. Driver Assistance
3. Door
4. Lights
5. Sound
6. Convenience
7. Service Interval
8. Other features
9. Reset
10. Language
The information provided may differ depending on which functions are applicable to your vehicle.
Shift to P to edit settings/Engage parking brake to edit settings
This warning message appears if you try to adjust the User Settings while driving.
- Automatic Transmission/Dual Clutch Transmission/Intelligent Variable Transmission
For your safety, change the User Settings after parking the vehicle, applying the parking brake and moving the shift lever to P (Park).
- Manual Transmission
For your safety, change the User Settings after engaging the parking brake.
1. Head-up display (if equipped)
2. Driver assistance
3. Door
4. Lights
5. Sound
6. Convenience
7. Service interval
If the service interval is activated and the time and distance is adjusted, messages are displayed in the following situations each time the vehicle is turned on.
- Service in: Displayed to inform the driver the remaining mileage and days to service.
- Service required: Displayed when the mileage and days to service has been reached or passed.
If any of the following conditions occur, the mileage and number of days to service may be incorrect.
- The battery cable is disconnected.
- The battery is discharged.
8. Other features
9. Reset
Trip information (trip computer)
The trip computer is a microcomputercontrolled driver information system that displays information related to driving.
NOTICE
Some driving information stored in the trip computer resets if the battery is disconnected.
Trip Modes
To change the trip mode, scroll the toggle the switch (
) on the steering wheel.
Fuel economy
Average Fuel Economy (1)
- The average fuel economy is calculated by the total driving distance and fuel consumption since the last average fuel economy reset.
- Fuel economy range: 0 ~ 99.9km/L, L/100 km or MPG - The average fuel economy can be reset both manually and automatically.
Manual reset
To clear the average fuel economy manually, press the OK button on the steering wheel for more than 1 second when the average fuel economy is displayed.
Automatic reset
To make the average fuel economy be reset automatically whenever refueling, select the “Fuel economy auto reset” mode in User Setting menu of the LCD Windows (Refer to “LCD Windows” on page 4-51).
- OFF - You may set to default manually by using the trip switch reset button.
- After ignition - The vehicle will automatically set to default once 4 hours pass after the Ignition is in OFF.
- After refueling - After refueling more than 6 liters and driving over 1 km/h, the vehicle will reset to default automatically.
NOTICE
The average fuel economy is not displayed for more accurate calculation if the vehicle does not drive more than 10 seconds or 50 meters (0.03 miles) since the ignition switch or Engine Start/Stop button is turned to ON.
Instant Fuel Economy (2)
• This mode displays the instant fuel economy during the last few seconds when the vehicle speed is more than 10 km/h (6.2 MPH).
- Fuel economy range:
0.0 ~ 30km/L, L/100km or 0.0 ~ 50.0 MPG
Accumulated driving information mode
This display shows the accumulated trip distance (1), the average fuel efficiency (2), and the total driving time (3).
- Accumulated information is calculated after the vehicle has run for more than 300 meters.
- If you press "OK" button for more than 1 second after the Cumulative Information is displayed, the information will be reset.
- If the engine is running, even when the vehicle is not in motion, the information will be accumulated.
One time driving information mode
This display shows the trip distance (1), the average fuel efficiency (2), and the total driving time (3) information once per one ignition cycle.
- Fuel efficiency is calculated after the vehicle has run for more than 300 meters.
- The Driving Information will be reset 4 hours after ignition has been turned off. So, when the vehicle ignition is turned on within 4 hours, the information will not be reset.
- If you press "OK" button for more than 1 second after the Driving Information is displayed, the information will be reset.
- If the engine is running, even when the vehicle is not in motion, the information will be accumulated.
Digital speedometer
This mode displays the current speed of the vehicle.
Service mode
Service in
It calculates and displays when you need a scheduled maintenance service (mileage or days).
If the remaining mileage or time reaches 1,500 km (900 mi.) or 30 days, “Service in” message is displayed for several seconds each time you set the ignition switch or Engine Start/Stop Button to the ON position.
Service required
If you do not have your vehicle serviced according to the already inputted service interval, “Service required” message is displayed for several seconds each time you set the ignition switch or Engine Start/Stop Button to the ON position.
To reset the service interval to the mileage and days you inputted before:
• Press the OK button (Reset) for more than 1 second.
NOTICE
If any of the following conditions occurs, the mileage and days may be incorrect.
- The battery cable is disconnected.
- The battery is discharged.
LCD display messages
Driving info display
At the end of each driving cycle, the Driving Info message is displayed.
This display shows the trip distance (1), average fuel economy (2), driving time (3).
This information is displayed for a few seconds when you turn off the vehicle, and then goes off automatically. The information is calculated for each time the vehicle is turned on.
NOTICE
- If sunroof open warning is displayed in the cluster, the Driving Information message may not be displayed.
- To set the charging time and/or climate time, refer to a separately supplied car navigation system manual for detailed information.
Door, hood, tailgate open
• This warning is displayed indicating which door, or the hood, or the tailgate is open.
Sunroof open
• This warning is displayed if you turn off the engine when the sunroof is open.
Lights mode
This indicator displays which exterior light is selected using the lighting control.
You can activate or deactivate Wiper/ Lights Display function from the User Settings mode in the cluster LCD display.
Wiper mode
This indicator displays which wiper speed is selected using the wiper control.
You can activate or deactivate Wiper/ Lights Display function from the User Settings mode in the cluster LCD display.
Engine has overheated
• This warning message illuminates when the engine coolant temperature is above 120°C (248°F). This mean that the engine is overheated and may be damaged.
Low key battery (for smart key system)
• This warning message illuminates if the battery of the smart key is discharged when the Engine Start/Stop Button changes to the OFF position.
Press START button while turning wheel (for smart key system)
• This warning message illuminates if the steering wheel does not unlock normally when the Engine Start/Stop Button is pressed.
• It means that you should press the Engine Start/Stop Button while turning the steering wheel right and left.
Steering wheel unlocked (for smart key system)
• This warning message illuminates if the steering wheel does not lock when the Engine Start/Stop Button changes to the OFF position.
Check steering wheel lock system (for smart key system)
• This warning message illuminates if the steering wheel does not lock normally when the Engine Start/Stop Button changes to the OFF position.
Press clutch pedal to start engine (for smart key system and manual transaxle)
• This warning message illuminates if the Engine Start/Stop Button changes to the ACC position twice by pressing the button repeatedly without depressing the clutch pedal.
• It means that you should depress the clutch pedal to start the engine.
Key not in vehicle (for smart key system)
• This warning message illuminates if the smart key is not in the vehicle when you press the Engine Start/ Stop Button.
• It means that you should always have the smart key with you.
Key not detected (for smart key system)
• This warning message illuminates if the smart key is not detected when you press the Engine Start/Stop Button.
Shift to P or N to start engine (for smart key system)
• This warning message illuminates if you try to start the engine with the shift lever not in the P (Park) or N (Neutral) position.
Press brake pedal to start engine (for smart key system)
• This warning message illuminates if the Engine Start/Stop Button changes to the ACC position twice by pressing the button repeatedly without depressing the brake pedal.
• It means that you should depress the brake pedal to start the engine.
Battery discharging due to external electrical devices (if equipped)
The vehicle can detect self-discharge of the battery due to over-current that is generated by unauthorized electrical devices such as black box mounting during parking.
Please note that functions such as ISG are limited and battery discharge problems may occur.
If the warning continues even after external electrical devices are removed, have your vehicle inspected by a professional workshop. Kia recommends to contact an authorized Kia dealer/service partner.
Press start button again (for smart key system)
- This warning message illuminates if you can not operate the Engine Start/Stop Button when there is a problem with the Engine Start/Stop Button system.
- It means that you could start the engine by pressing the Engine Start/ Stop Button once more.
- If the warning illuminates each time you press the Engine Start/Stop Button, have the vehicle inspected by a professional workshop. Kia recommends to visit an authorised Kia dealer/ service partner.
Press start button with key (for smart key system)
- This warning message illuminates if you press the Engine Start/Stop Button while the warning message “Key not detected” is illuminating.
- At this time, the immobilizer indicator light blinks.
Check DAW System (if equipped)
This warning message is displayed if there is a problem with the Driver Attention Warning system. In this case, have the vehicle inspected by a professional workshop. Kia recommends to visit an authorized Kia dealer/service partner.
❈ For more information, refer to “Driver Attention Warning (DAW)” on page 6-125.
Check BCW system (if equipped)
This warning message is displayed if there is a problem with the Blind- Spot Collision Warning (BCW) system. In this case, have the vehicle inspected by a professional workshop. Kia recommends to visit an authorized Kia dealer/ service partner.
❈ For more information, refer to “Blind-Spot Collision Warning (BCW)” on page 6-108.
Icy road warning
This warning is to warn the driver the road may be icy.
When the following conditions occur, the warning light (including Outside Temperature Gauge) blinks 5 times and then illuminates, and also warning chime sounds once.
- The temperature on the Outside Temperature Gauge is below approximately 4°C (40°F).
NOTICE
If the icy road warning appears while driving, you should drive more attentively and safely refraining from over-speeding, rapid acceleration, sudden braking or sharp turning, etc.
Download Manual