Checking and Maintaining Wiper Blades
Checking Wiper Blades
If the wiper blade rubber has deteriorated, it will leave streaks and the hard surfaces of the blade may scratch the window glass.
Set the power mode to VEHICLE OFF.
While holding the wiper switch in the MIST position, set the power mode to ON, then to VEHICLE OFF.
u Both wiper arms are set to the maintenance position as shown in the image.
Lift the driver side wiper arm first, then the passenger side.
Continued
643
uuChecking and Maintaining Wiper BladesuChanging the Wiper Blade Rubber
Press and hold the tab, then slide the holder off the wiper arm.
Pull the end of the wiper blade in the direction of the arrow in the image until it is out of the holder’s end cap.
Pull the wiper blade in the opposite direction to slide it out of its holder.
uuChecking and Maintaining Wiper Blades uChanging the Wiper Blade Rubber
Insert the flat side of the new wiper blade onto the bottom part of the holder. Insert the blade all the way.
Install the end of the wiper blade into the cap.
Slide the holder onto the wiper arm until it locks.
Lower the passenger side wiper arm first, then the driver side.
Set the power mode to ON and hold the wiper switch in the MIST position until both wiper arms return to the standard position.
Download Manual