Opening, closing the windows and moon roof
Power windows
Opening and closing procedures
The power windows can be opened and closed using the switches.
Operating the switch moves the windows as follows:
Type A
Closing
1
Opening
2
One-touch opening* (driver’s
3
window only)
3
*: To stop the window partway, oper-
ate the switch in the opposite direc-
tion.
Type B
Closing
1
One-touch closing* (front seat
2
windows)
Opening
3
One-touch opening* (front seat
4
windows)
*: To stop the window partway, oper-
ate the switch in the opposite direc-
tion.
Window lock switch
Press the switch down to lock the
passenger window switches.
Use this switch to prevent children
from accidentally opening or clos-
ing a passenger window.
140
The power windows can be operated when
The engine switch is in the “ON” position.
Operating the power windows after turning the engine off
The power windows can be operated for approximately 43 seconds after the
engine switch is turned to the “ACC” or “LOCK” position. They cannot, how-
ever, be operated once either front door is opened.
Jam protection function (type B only)
If an object becomes caught between the window and the window frame, win-
dow travel is stopped and the window is opened slightly.
When the power window does not close normally (type B only)
If the jam protection function is operating abnormally and a window cannot be
closed, perform the following operations using the power window switch on
the relevant door.
After stopping the vehicle, the window can be closed by holding the power
window switch in the one-touch closing position while the engine switch is
turned to the “ON” position.
If the window still cannot be closed even by carrying out the operation as
explained above, initialize the function by performing the following proce-
dure.
Hold the power window switch in the one-touch closing position. Continue
1
holding the switch for a further 6 seconds after the window has closed.
Hold the power window switch in the one-touch opening position. Con-
2
tinue holding the switch for a further 2 seconds after the window has
opened completely.
Hold the power window switch in the one-touch closing position once
3
again. Continue holding the switch for a further 2 seconds after the win-
dow has closed.
If you release the switch while the window is moving, start again from the
beginning.
If the window continues to close but then re-open slightly even after perform-
ing the above procedure correctly, have the vehicle inspected by your Toyota
dealer.
141
WARNING
Observe the following precautions.
Failure to do so may result in death or serious injury.
Closing the windows
The driver is responsible for all the power window operations, including the
operation for the passengers. In order to prevent accidental operation,
especially by a child, do not let a child operate the power windows. It is
possible for children and other passengers to have body parts caught in
the power window. Also, when riding with a child, it is recommended to use
Check to make sure that all passengers do not have any part of their body
in a position where it could be caught when a window is being operated.
When exiting the vehicle, turn the engine switch off, carry the key and exit
the vehicle along with the child. There may be accidental operation, due to
mischief, etc., that may possibly lead to an accident.
3
Jam protection function (type B only)
Never use any part of your body to intentionally activate the jam protection
function.
The jam protection function may not work if something gets caught just
before the window fully closes.
142
Back window∗
Opening and closing
Open/close
Push the lock release lever and
slide the back window.
Closing the back window
Make sure that the back window is securely closed after closing it.
WARNING
Caution while driving
Keep the back window closed.
This not only keeps personal belongings from being thrown out, but also
prevents exhaust gases from entering the vehicle.
∗: If equipped
143
Power back window∗
Opening and closing
Double Cab models
Opening
1
Closing
2
3
∗: If equipped
144
CrewMax models
Opening
Closing
1
2
The power back window can be operated when
The engine switch is in the “ON” position.
Operating the power back windows after turning the engine off
The power back windows can be operated for approximately 43 seconds after
the engine switch is turned to the “ACC” or “LOCK” position. They cannot,
however, be operated once either front door is opened.
145
WARNING
Closing the back window
Observe the following precautions.
Failure to do so may result in death or serious injury.
The driver is responsible for all the power back window operations, includ-
ing the operation for the passengers. In order to prevent accidental opera-
tion, especially by a child, do not let a child operate the power back
window. It is possible for children and other passengers to have body parts
caught in the power back window.
Check to make sure that all passengers do not have any part of their body
in a position where it could be caught when a window is being operated.
When exiting the vehicle, turn the engine switch off, carry the key and exit
the vehicle along with the child. There may be accidental operation, due to
mischief, etc., that may possibly lead to an accident.
3
Caution while driving
Keep the back window closed.
This not only keeps personal belongings from being thrown out, but also
prevents exhaust gases from entering the vehicle.
146
Moon roof∗
Use the overhead switches to open and close the moon roof and
tilt it up and down.
Opening and closing
Opens the moon roof*
1
Closes the moon roof*
2
*: Lightly press either way of the
moon roof switch to stop the moon
roof partway.
Tilting up and down
Tilts the moon roof up*
1
Tilts the moon roof down*
2
*: Lightly press either way of the
moon roof switch to stop the moon
roof partway.
The moon roof can be operated when
The engine switch in the “ON” position.
Operating the moon roof after turning the engine off
The moon roof can be operated for approximately 43 seconds after the
engine switch is turned to the “ACC” or “LOCK” position. It cannot, however,
be operated once either front door is opened.
Jam protection function
If an object is detected between the moon roof and the frame while the moon
roof is closing or tilting down, travel is stopped and the moon roof opens
slightly.
∗: If equipped
147
Sunshade
The sunshade can be opened and closed manually. However, the sunshade
will open automatically when the moon roof is opened.
Door lock linked moon roof operation
When the moon roof does not close normally
Perform the following procedure:
If the moon roof closes but then re-opens slightly
Stop the vehicle.
1
Press and hold the “ ¼ ” (sliding close) switch.*1
2
The moon roof will close, reopen and pause for approximately 10 sec-
onds.* Then it will close again, tilt up and pause for approximately 1 sec-
ond. Finally, it will tilt down, open and close.
2
3
Check to make sure that the moon roof is completely closed and then
release the switch.
3
If the moon roof tilts down but then tilts back up
Stop the vehicle.
1
Press and hold the “UP” (tilt up) switch*1 until the moon roof moves into
2
the tilt up position and stops.
Release the “UP” (tilt up) switch once and then press and hold the “UP”
3
(tilt up) switch again.*
1
The moon roof will pause for approximately 10 seconds in the tilt up posi-
tion.* Then it will adjust slightly and pause for approximately 1 second.
Finally, it will tilt down, open and close.
2
Check to make sure that the moon roof is completely closed and then
release the switch.
4
*1: If the switch is released at the incorrect time, the procedure will have to
be performed again from the beginning.
*
2: If the switch is released after the above mentioned 10 seconds pause,
automatic operation will be disabled. In that case, press and hold the “¼”
(sliding close) or “UP” (tilt up) switch, and the moon roof will tilt up and
pause for approximately 1 second. Then it will tilt down, open and close.
Check to make sure that the moon roof is completely closed and then
release the switch.
If the moon roof does not fully close even after performing the above proce-
dure correctly, have the vehicle inspected by your Toyota dealer.
148
Moon roof open reminder function
The buzzer sounds and a message is shown on the multi-information display
in the instrument cluster when the engine switch is turned off and the driver’s
door is opened with the moon roof open.
When the battery is disconnected
The moon roof must be initialized in order to ensure proper operation.
Push and hold the switch toward the “UP” (tilt up) side or “ ¼ ” (sliding
1
close) side.
After the moon roof will tilt up and down, release the switch.
2
To ensure the initialization is complete, make sure automatic opening and
3
closing functions work properly.
Customization that can be configured at Toyota dealer
Settings (e.g. linked door lock operation) can be changed.
149
WARNING
Observe the following precautions.
Failure to do so may cause death or serious injury.
Opening the moon roof
Do not allow any passengers to put their hands or heads outside the vehi-
cle while it is moving.
Do not sit on top of the moon roof.
Closing the moon roof
The driver is responsible for moon roof opening and closing operations. In
order to prevent accidental operation, especially by a child, do not let a
child operate the moon roof. It is possible for children and other passen-
gers to have body parts caught in the moon roof.
3
Check to make sure that all passengers do not have any part of their body
in a position where it could be caught when the moon roof is being oper-
ated.
When using the key and operating the moon roof, operate the moon roof
after checking to make sure that there is no possibility of any passenger
having any of their body parts caught in the moon roof. Also, do not let a
child operate moon roof by the key. It is possible for children and other
passengers to get caught in the moon roof.
When exiting the vehicle, turn the engine switch off, carry the key and exit
the vehicle along with the child. There may be accidental operation, due to
mischief, etc., that may possibly lead to an accident.
Jam protection function
Never use any part of your body to intentionally activate the jam protection
function.
The jam protection function may not work if something gets caught just
before the moon roof fully closes.
Download Manual