Essential information
Emergency flashers
The emergency flashers are used to warn other drivers when the
vehicle has to be stopped in the road due to a breakdown, etc.
Press the switch.
All the turn signal lights will flash.
To turn them off, press the switch
once again.
Emergency flashers
If the emergency flashers are used for a long time while the engine is not
operating, the battery may discharge.
531
If your vehicle has to be stopped in an
emergency
Only in an emergency, such as if it becomes impossible to stop
the vehicle in the normal way, stop the vehicle using the follow-
ing procedure:
Steadily step on the brake pedal with both feet and firmly depress it.
1
Do not pump the brake pedal repeatedly as this will increase the effort
required to slow the vehicle.
Shift the shift lever to N.
2
If the shift lever is shifted to N
After slowing down, stop the vehicle in a safe place by the road.
3
Stop the engine.
4
If the shift lever cannot be shifted to N
Keep depressing the brake pedal with both feet to reduce vehicle
3
speed as much as possible.
Stop the engine by turning the
4
engine switch to the “ACC”
position.
8
Stop the vehicle in a safe place by the road.
5
WARNING
If the engine has to be turned off while driving
Power assist for the brakes and steering wheel will be lost, making the
brake pedal harder to depress and the steering wheel heavier to turn.
Decelerate as much as possible before turning off the engine.
Never attempt to remove the key, as doing so will lock the steering wheel.
Download Manual