Using an external device
Listening to an iPod
Connecting an iPod enables you to enjoy music from the vehicle
speakers.
Select “iPod” on the “Select Audio Source” screen.
When the iPod connected to the system includes iPod video, the
system can only output the sound by selecting the browse
screen.
Connecting an iPod
Audio control screen
“Select Audio Source” screen
1
appears
Displays cover art
2
5
Selecting the play mode
3
Shuffle play
4
Repeat play
5
Pause
6
Select
to resume playback
7
Selecting a play mode
Select “Browse” on the “iPod” screen.
1
Select the desired play mode by selecting the “Playlists”, “Artists”,
2
“Albums”, “Songs”, “Podcasts”, “Audio books”, “Genres”, “Compos-
ers” or “Video”. Then select a song to begin using the selected play
mode.
340
About iPod
“Made for iPod” and “Made for iPhone” mean that an electronic accessory
has been designed to connect specifically to iPod or iPhone respectively,
and has been certified by the developer to meet Apple performance stan-
dards.
Apple is not responsible for the operation of this device or its compliance
with safety and regulatory standards. Please note that the use of this acces-
sory with iPod or iPhone may affect wireless performance.
iPhone, iPod, iPod classic, iPod nano, and iPod touch are trademarks of
Apple Inc., registered in the U.S. and other countries. Lightning is a trade-
mark of Apple Inc.
iPod cover art
Depending on the iPod and songs in the iPod, iPod cover art may be dis-
played.
It may take time to display iPod cover art, and the iPod may not be operated
while the cover art display is in process.
Only iPod cover art that is saved in JPEG format can be displayed.
iPod functions
When an iPod is connected and the audio source is changed to iPod mode,
the iPod will resume play from the same point in which it was last used.
Depending on the iPod that is connected to the system, certain functions
may not be available. If a function is unavailable due to a malfunction (as
opposed to a system specification), disconnecting the device and recon-
necting it may resolve the problem.
While connected to the system, the iPod cannot be operated with its own
controls. It is necessary to use the controls of the vehicle’s multimedia sys-
tem instead.
When the battery level of an iPod is very low, the iPod may not operate. If
so, charge the iPod before use.
341
iPod problems
To resolve most problems encountered when using your iPod, disconnect
your iPod from the vehicle iPod connection and reset it. For instructions on
how to reset your iPod, refer to your iPod Owner’s Manual.
Error messages
Message
Cause/Correction procedures
“Connection error. Please
consult your Owner’s Man- This indicates a problem in the iPod or its con-
ual for instructions on how nection.
to connect the iPod.”
“There are no songs avail-
able for playback. Please This indicates that there is no music data in
add compatible files to the iPod.
your iPod.”
This indicates that the software version is not
“Please check the iPod compatible.
firmware version.”
Please check the compatible models.
This indicates that the display multimedia sys-
tem failed to authorize the iPod.
Please check your iPod.
5
“iPod authorization unsuc-
cessful.”
342
Compatible models
The following iPod , iPod nano , iPod classic , iPod touch and iPhone®
®
®
®
®
devices can be used with this system.
Made for
iPod touch (5th generation)
iPod touch (4th generation)
iPod touch (3rd generation)
iPod touch (2nd generation)
iPod touch (1st generation)
iPod classic
iPod with video
iPod nano (7th generation)
iPod nano (6th generation)
iPod nano (5th generation)
iPod nano (4th generation)
iPod nano (3rd generation)
iPhone 6 Plus
iPhone 6
iPhone 5s
iPhone 5c
iPhone 5
iPhone 4S
iPhone 4
iPhone 3GS
iPhone 3G
iPhone
Depending on differences between models or software versions etc., some
models might be incompatible with this system.
WARNING
While driving
Do not connect an iPod or operate the controls.
NOTICE
To prevent damage to the iPod or its terminals
Do not leave the iPod in the vehicle. The temperature inside the vehicle
may become high, resulting in damage to the iPod.
Do not push down on or apply unnecessary pressure to the iPod while it is
connected.
Do not insert foreign objects into the port.
343
Listening to a USB memory device
Connecting a USB memory device enables you to enjoy music
from the vehicle speakers.
Select “USB” on the “Select Audio Source” screen.
Connecting a USB memory device
Audio control screen
“Select Audio Source” screen
1
appears
Displays cover art
2
Displaying the folder list
3
Random playback
4
5
Repeat play
5
Pause
6
Select
to resume playback
7
USB memory functions
Depending on the USB memory device that is connected to the system, the
device itself may not be operable and certain functions may not be avail-
able. If the device is inoperable or a function is unavailable due to a mal-
function (as opposed to a system specification), disconnecting the device
and reconnecting it may resolve the problem.
If the USB memory device still does not begin operation after being discon-
nected and reconnected, format the memory.
Error messages for USB memory
Message
Cause/Correction procedures
“Connection error. Please
consult your Owner’s Man- This indicates a problem with the USB mem-
ual for instruction on how to ory device or its connection.
connect the USB device.”
“There are no files available
for playback. Please add This indicates that no MP3/WMA/AAC files
compatible files to your USB are included on the USB memory device.
device.”
344
USB memory
Compatible devices
USB memory device that can be used for MP3, WMA and AAC playback.
Compatible device formats
The following device format can be used:
USB communication format: USB2.0 HS (480 Mbps) and FS (12 Mbps)
File system format: FAT16/32 (Windows)
Correspondence class: Mass storage class
MP3, WMA and AAC files written to a device with any format other than
those listed above may not play correctly, and their file names and folder
names may not be displayed correctly.
Items related to standards and limitations are as follows:
Maximum directory hierarchy: 8 levels
Maximum number of folders in a device: 3000 (including the root)
Maximum number of files in a device: 9999
Maximum number of files per folder: 255
MP3, WMA and AAC files
MP3 (MPEG Audio LAYER 3) is a standard audio compression format.
Files can be compressed to approximately 1/10 of their original size using
MP3 compression.
WMA (Windows Media Audio) is a Microsoft audio compression format.
This format compresses audio data to a size smaller than that of the MP3
format.
AAC is short for Advanced Audio Coding and refers to an audio compres-
sion technology standard used with MPEG2 and MPEG4.
MP3, WMA and AAC file and media/formats compatibility are limited.
MP3 file compatibility
Compatible standards
MP3 (MPEG1 AUDIO LAYER3, MPEG2 AUDIO LAYER3)
Compatible sampling frequencies
MPEG1 AUDIO LAYER3: 32, 44.1, 48 (kHz)
MPEG2 AUDIO LAYER3: 16, 22.05, 24 (kHz)
Compatible bit rates (compatible with VBR)
MPEG1 AUDIO LAYER3: 32-320 (kbps)
MPEG2 AUDIO LAYER3: 8-160 (kbps)
Compatible channel modes: stereo, joint stereo, dual channel and mon-
aural
WMA file compatibility
Compatible standards
WMA Ver. 7, 8, 9
Compatible sampling frequencies
HIGH PROFILE 32, 44.1, 48 (kHz)
Compatible bit rates
HIGH PROFILE 48-320 (kbps, VBR)
345
AAC file compatibility
Compatible standards
MPEG4/AAC-LC
Compatible sampling frequencies
11.025/12/16/22.05/24/32/44.1/48 (kHz)
Compatible bit rates
16-320 (kbps)
Compatible channel modes: 1 ch and 2 ch
File names
The only files that can be recognized as MP3/WMA/AAC and played are
those with the extension .mp3 or .wma.
ID3, WMA and AAC tags
ID3 tags can be added to MP3 files, making it possible to record the track
title, artist name, etc.
The system is compatible with ID3 Ver. 1.0, 1.1, and Ver. 2.2, 2.3 ID3 tags.
(The number of characters is based on ID3 Ver. 1.0 and 1.1.)
WMA tags can be added to WMA files, making it possible to record the
track title and artist name in the same way as with ID3 tags.
AAC tags can be added to AAC files, making it possible to record the track
title and artist name in the same way as with ID3 tags.
5
MP3, WMA and AAC playback
When a device containing MP3, WMA and AAC files is connected, all
files in the USB memory device are checked. Once the file check is fin-
ished, the first MP3, WMA and AAC file is played. To make the file check
finish more quickly, we recommend that you do not include any files other
than MP3, WMA and AAC files or create any unnecessary folders.
When a USB memory device is connected and the audio source is
changed to USB memory mode, the USB memory device will start play-
ing the first file in the first folder. If the same device is removed and
reconnected (and the contents have not been changed), the USB mem-
ory device will resume play from the same point in which it was last used.
Extensions
If the file extensions .mp3, .wma and .m4a are used for files other than
MP3, WMA and AAC files, they will be skipped (not played).
Playback
To play MP3 files with steady sound quality, we recommend a fixed bit
rate of at least 128 kbps and a sampling frequency of 44.1 kHz.
There is a wide variety of freeware and other encoding software for MP3,
WMA and AAC files on the market, and depending on the status of the
encoding and the file format, poor sound quality or noise at the start of
playback may result. In some cases, playback may not be possible at all.
Microsoft, Windows, and Windows Media are the registered trademarks
of Microsoft Corporation in the U.S.A. and other countries.
346
WARNING
While driving
Do not connect a USB memory device or operate the device controls.
NOTICE
To prevent damage to the USB memory device or its terminals
Do not leave the USB memory device in the vehicle. The temperature
inside the vehicle may become high, resulting in damage to the USB
memory device.
Do not push down on or apply unnecessary pressure to the USB memory
device while it is connected.
Do not insert foreign objects into the port.
347
Using the AUX port
To use the AUX port, connect a portable player, then select
“AUX” on the “Select Audio Source” screen.
Connecting a portable audio player
Operating portable audio players connected to the multimedia system
The volume can be adjusted using the vehicle’s audio controls. All other
adjustments must be made on the portable audio player itself.
When using a portable audio player connected to the power outlet
Noise may occur during playback. Use the power source of the portable
audio player.
WARNING
While driving
5
Do not connect a portable audio player or operate the device controls.
Download Manual