Maintenance
Scheduled maintenance should be performed at specified intervals according to the maintenance schedule.
For details about maintenance items and schedules, refer to the “Sched- uled Maintenance Guide” or “Owner’s Manual Supplement”.
Please be aware that do-it-yourself maintenance may affect warranty coverage.
The use of Toyota Repair Manuals is recommended.
For details about warranty coverage, refer to the separate “Owner’s War- ranty Information Booklet” or “Owner’s Manual Supplement”.
7-2. Maintenance
415
It is recommended that genuine Toyota parts be used for repairs to ensure performance of each system. If non-Toyota parts are used in replacement or if a repair shop other than a Toyota dealer performs repairs, confirm the war- ranty coverage.
To reset the message, follow the procedure described below:
Vehicles with a monochrome display
Vehicles without a smart key system: Turn the engine switch to the “LOCK” position with the trip meter A reading shown. (P. 77)
Vehicles with a smart key system: Turn the engine switch off with the trip meter A reading shown. (P. 77)
Vehicles without a smart key system:
While pressing the display change button (P. 77), turn the engine switch to the “ON” position (do not start the engine because reset mode will be canceled).
Vehicles with a smart key system:
While pressing the display change button (P. 77), turn the engine switch to the IGNITION ON mode (do not start the engine because otherwise the reset mode will be canceled).
Continue to press and hold the button until the trip meter displays “000000”.
Vehicles with a color display
While the engine is running, switch the multi-information display to the “Set- tings” screen. (P. 93)
Select “Reset Scheduled Maint. Data” on the “Settings” screen.
Select “Yes” when “Reset Data?” is displayed on the multi-information dis- play.
“The Data Has Been Reset” will be displayed when the reset procedure has been completed.
416 7-2. Maintenance
7-2. Maintenance
417
418 7-2. Maintenance
|
Items |
Check points |
|
Accelerator pedal |
The accelerator pedal should move smoothly (without uneven pedal effort or catching).
|
|
Continuously variable transmission “Park” mechanism |
When parked on a slope and the shift lever is in P, is the vehicle securely stopped?
|
|
Brake pedal |
Does the brake pedal move smoothly?
Does the brake pedal have appro- priate clearance from the floor?
(P. 545) Does the brake pedal have the correct amount of free play?
(P. 545) |
|
Brakes |
The vehicle should not pull to one side when the brakes are applied.
The brakes should work effec- tively.
The brake pedal should not feel spongy.
The brake pedal should not get too close to the floor when the brakes are applied.
|
|
Clutch pedal |
Does the clutch pedal move smoothly?
Does the clutch pedal have appro- priate clearance from the floor?
Does the clutch pedal have the correct amount of free play?
(P. 544) |
7-2. Maintenance
419
|
Items |
Check points |
|
Head restraints |
Do the head restraints move smoothly and lock securely?
|
|
Indicators/buzzers |
Do the indicators and buzzers function properly?
|
|
Lights |
Do all the lights come on?
|
|
Parking brake |
Moves smoothly?
When parked on a slope and the parking brake is on, is the vehicle securely stopped?
|
|
Seat belts |
Do the seat belts operate smoothly?
The seat belts should not be dam- aged.
|
|
Seats |
Do the seat controls operate prop- erly?
|
|
Steering wheel |
Does the steering wheel rotate smoothly?
Does the steering wheel have the correct amount of free play?
There should not be any strange sounds coming from the steering wheel.
|
420 7-2. Maintenance
|
Items |
Check points |
|
Doors/trunk |
Do the doors/trunk operate smoothly?
|
|
Engine hood |
Does the engine hood lock system work properly?
|
|
Fluid leaks |
There should not be any signs of fluid leakage after the vehicle has been parked.
|
|
Tires |
Is the tire inflation pressure cor- rect?
The tires should not be dam- aged or excessively worn.
Have the tires been rotated according to the maintenance schedule?
The wheel nuts should not be loose.
|
|
Windshield wipers |
The wiper blades should not show any signs of cracking, splitting, wear, contamination or deforma- tion.
The wiper blades should clear the windshield without streaking or skipping.
|
7-2. Maintenance
421
The OBD system determines that a problem exists somewhere in the emission control system. Your vehicle may not pass the I/M test and may need to be repaired. Contact your Toyota dealer to service the vehicle.
Readiness codes that are set during ordinary driving are erased. Also, depending on your driving habits, the readiness codes may not be completely set.
The malfunction indicator lamp comes on indicating a temporary malfunction and your vehicle may not pass the I/M test.
The error code in the OBD system will not be cleared unless the vehi- cle is driven 40 or more times.
Contact your Toyota dealer to prepare the vehicle for re-testing.
Download Manual