2019 Toyota Corolla Owners Manual - Using an external device

Using an external device

Pressing the “AUDIO” button displays the audio control screen from any screens of the selected source.

Audio source selection screen appears

Displays cover art Selecting the play mode Shuffle play

Repeat play Pause

Select to resume playback

Setting the sound (P. 287)

5-6. Using an external device

297

Select the desired play mode. Then select a song to begin using the selected play mode.

Select to change on/off.

Select to change on/off.

298 5-6. Using an external device

About iPod

“Made for iPod”, “Made for iPhone” and “Made for iPad” mean that an elec- tronic accessory has been designed to connect specifically to iPod or iPhone, or iPad, respectively, and has been certified by the developer to meet Apple performance standards.

Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note that the use of this acces- sory with iPod, iPhone or iPad may affect wireless performance.

iPad, iPhone, iPod, iPod classic, iPod nano, and iPod touch are trademarks of Apple Inc., registered in the U.S. and other countries. Lightning is a trade- mark of Apple Inc.

iPod cover art

Depending on the iPod and songs in the iPod, iPod cover art may be dis- played.

This function can be changed to on/off. (P. 281)

It may take time to display iPod cover art, and the iPod may not be operated while the cover art display is in process.

Only iPod cover art that is saved in JPEG format can be displayed.

iPod functions

When an iPod is connected and the audio source is changed to iPod mode, the iPod will resume play from the same point in which it was last used.

Depending on the iPod that is connected to the system, certain functions may not be available. If a function is unavailable due to a malfunction (as opposed to a system specification), disconnecting the device and recon- necting it may resolve the problem.

While connected to the system, the iPod cannot be operated with its own controls. It is necessary to use the controls of the vehicle's Entune Audio instead.

When the battery level of an iPod is very low, the iPod may not operate. If so, charge the iPod before use.

Compatible models (P. 300)

iPod problems

5-6. Using an external device

299

To resolve most problems encountered when using your iPod, disconnect your iPod from the vehicle iPod connection and reset it. For instructions on how to reset your iPod, refer to your iPod Owner's Manual.

Error messages

300 5-6. Using an external device

Compatible models

The following iPod, iPod nano, iPod classic, iPod touch and iPhone devices can be used with this system.

Made for

iPod touch (5th generation)

iPod touch (4th generation)

iPod touch (3rd generation)

iPod touch (2nd generation)

iPod touch (1st generation)

iPod classic

iPod with video

iPod nano (7th generation)

iPod nano (6th generation)

iPod nano (5th generation)

iPod nano (4th generation)

iPod nano (3rd generation)

iPod nano (2nd generation)

iPod nano (1st generation)

iPhone 5s

iPhone 5c

iPhone 5

iPhone 4S

iPhone 4

iPhone 3GS

iPhone 3G

iPhone

This system only supports audio playback.

Depending on differences between models or software versions etc., some models might be incompatible with this system.

5-6. Using an external device

301

Pressing the “AUDIO” button displays the audio control screen from any screens of the selected source.

Audio source selection screen appears

Displaying the folder list Random playback (P. 277) Repeat play (P. 277) Pause

Select to resume playback

Setting the sound (P. 287)

Select “Browse” on the screen.

Select the desired play mode. Then select a song to begin using the selected play mode.

Displaying the now playing list

Touch the cover art display.

302 5-6. Using an external device

USB memory functions

Depending on the USB memory device that is connected to the system, the device itself may not be operable and certain functions may not be avail- able. If the device is inoperable or a function is unavailable due to a mal- function (as opposed to a system specification), disconnecting the device and reconnecting it may resolve the problem.

If the USB memory device still does not begin operation after being discon- nected and reconnected, format the memory.

Error messages for USB memory

USB memory

Compatible devices

USB memory device that can be used for MP3, WMA and AAC playback.

Compatible device formats

The following device format can be used:

USB communication format: USB2.0 HS (Mbps) and FS (12 Mbps)

File system format: FAT16/32 (Windows)

Correspondence class: Mass storage class

MP3, WMA and AAC files written to a device with any format other than those listed above may not play correctly, and their file names and folder names may not be displayed correctly.

Items related to standards and limitations are as follows:

Maximum directory hierarchy: 8 levels

Maximum number of folders in a device: 3000 (including the root)

Maximum number of files in a device: 9999

Maximum number of files per folder: 255

MP3, WMA and AAC files

MP3 (MPEG Audio LAYER 3) is a standard audio compression format.

Files can be compressed to approximately 1/10 of their original size using MP3 compression.

WMA (Windows Media Audio) is a Microsoft audio compression format. This format compresses audio data to a size smaller than that of the MP3 format.

AAC is short for Advanced Audio Coding and refers to an audio compression technology standard used with MPEG2 and MPEG4.

MP3, WMA and AAC file and media/formats compatibility are limited.

MP3 file compatibility

Compatible standards

5-6. Using an external device

303

MP3 (MPEG1 AUDIO LAYERII, III, MPEG2 AUDIO LAYERII, III)

Compatible sampling frequencies

MPEG1 AUDIO LAYERII, III: 32, 44.1, 48 (kHz)

MPEG2 AUDIO LAYERII, III: 16, 22.05, 24 (kHz)

Compatible bit rates (compatible with VBR) MPEG1 AUDIO LAYERII, III: 32-320 (kbps) MPEG2 AUDIO LAYERII, III: 8-160 (kbps)

Compatible channel modes: stereo, joint stereo, dual channel and mon- aural

WMA file compatibility

Compatible standards WMA Ver. 7, 8, 9

Compatible sampling frequencies HIGH PROFILE 32, 44.1, 48 (kHz)

Compatible bit rates

HIGH PROFILE 48-320 (kbps, VBR)

AAC file compatibility

Compatible standards MPEG4/AAC-LC

Compatible sampling frequencies 11.025/12/16/22.05/24/32/44.1/48 (kHz)

Compatible bit rates 16-320 (kbps)

Compatible channel modes: 1 ch and 2 ch

File names

The only files that can be recognized as MP3/WMA/AAC and played are those with the extension .mp3, .wma or .m4a.

ID3, WMA and AAC tags

ID3 tags can be added to MP3 files, making it possible to record the track title, artist name, etc.

The system is compatible with ID3 Ver. 1.0, 1.1, and Ver. 2.2, 2.3 ID3 tags. (The number of characters is based on ID3 Ver. 1.0 and 1.1.)

WMA tags can be added to WMA files, making it possible to record the track title and artist name in the same way as with ID3 tags.

AAC tags can be added to AAC files, making it possible to record the track title and artist name in the same way as with ID3 tags.

304 5-6. Using an external device

MP3, WMA and AAC playback

When a device containing MP3, WMA and AAC files is connected, all files in the USB memory device are checked. Once the file check is fin- ished, the first MP3, WMA and AAC file is played. To make the file check finish more quickly, we recommend that you do not include any files other than MP3, WMA and AAC files or create any unnecessary folders.

When a USB memory device is connected and the audio source is changed to USB memory mode, the USB memory device will start play- ing the first file in the first folder. If the same device is removed and reconnected (and the con- tents have not been changed), the USB mem- ory device will resume play from the same point in which it was last used.

Extensions

If the file extensions .mp3, .wma and .m4a are used for files other than MP3, WMA and AAC files, they will be skipped (not played).

Playback

To play MP3 files with steady sound quality, we recommend a fixed bit rate of at least 128 kbps and a sampling frequency of 44.1 kHz.

There is a wide variety of freeware and other encoding software for MP3, WMA and AAC files on the market, and depending on the status of the encoding and the file format, poor sound quality or noise at the start of playback may result. In some cases, playback may not be possible at all.

Microsoft, Windows, and Windows Media are the registered trademarks of Microsoft Corporation in the U.S.A. and other countries.

5-6. Using an external device

305

Operating portable audio players connected to Entune Audio

The volume can be adjusted using the vehicle's audio controls. All other adjustments must be made on the portable audio player itself.

When using a portable audio player connected to the power outlet Noise may occur during playback. Use the power source of the portable audio player.