Multi-information display (4.2-inch display)
Display and menu icons
■ Display
.png)
- Driving support system status display area
Displays an image when the following systems are operating and a menu icon other than 
is selected:
- LTA (Lane Tracing Assist)
- LDA (Lane Departure Alert)
- Dynamic radar cruise control
- RSA (Road Sign Assist) (if equipped)
- Content display area
By selecting menu icons on the multi-information display, a variety of driving-related information can be displayed. The multi-information display can also be used to change display settings and other vehicle settings.
Warning or advice pop-up displays are also displayed in certain situations.
■ Menu icons
The menu icons will be displayed by pressing the 
or 
meter control switch.
Driving information display
Driving support system information display
Audio system-linked display
Vehicle information display
Settings display
Warning message display
■Liquid crystal display
Small spots or light spots may appear on the display. This phenomenon is characteristic of liquid crystal displays, and there is no problem continuing to use the display.
WARNING
■Caution for use while driving
- When operating the multi-information display while driving, pay extra attention to the safety of the area around the vehicle.
- Do not look continuously at the multi-information display while driving as you may fail to see pedestrians, objects on the road, etc. ahead of the vehicle.
Changing the meter display
The multi-information display is operated using the meter control switches.
.png)
: Select menu icons
: Change displayed content, scroll up/down the screen and move the cursor up/down- Press: Enter/Set
Press and hold: Reset/Display customizable items - Return to the previous screen
Call sending/receiving and history display
Linked with the hands-free system, sending or receiving call is displayed.
For details regarding the hands-free system, refer to the "MULTIMEDIA OWNER'S MANUAL".
Content of driving information
■ Display items
- Speedometer display/Driving range
- Fuel economy
- Eco Driving Indicator/Driving range
■ Speedometer display/Driving range
- Speedometer display
- Driving range
Displays driving range with remaining fuel. Use the displayed values as a reference only.
This distance is computed based on your average fuel consumption.
As a result, the actual distance that can be driven may differ from that displayed.
When only a small amount of fuel is added to the tank, the display may not be updated.
When refueling, turn the engine switch off. If the vehicle is refueled without turning the engine switch off, the display may not be updated.
■ Fuel economy
Use the displayed values as a reference only.
.png)
- Average fuel economy (after reset)
To reset the average fuel economy display, press and hold the OK meter control switch.
- Current fuel consumption
Displays instantaneous current fuel consumption.
- Driving range
Displays driving range with remaining fuel.
This distance is computed based on your average fuel consumption.
As a result, the actual distance that can be driven may differ from that displayed.
When only a small amount of fuel is added to the tank, the display may not be updated.
When refueling, turn the engine switch off. If the vehicle is refueled without turning the engine switch off, the display may not be updated.
The average fuel economy display can be changed in 
.
- Average fuel economy (after start)
Displays the average fuel consumption since engine start.
- Average fuel economy (after refuel)
Displays the average fuel consumption since the vehicle was refueled.
To reset the average fuel economy display, press and hold the meter control switch.
■ Eco Driving Indicator/Driving range
- Eco Driving Indicator
.png)
- Eco Driving Indicator Light
During Eco-friendly acceleration (Eco driving), the Eco Driving Indicator Light will turn on. When the acceleration exceeds the Zone of Eco driving, or when the vehicle is stopped, the light turns off.
- Eco Driving Indicator Zone Display
Suggests the Zone of Eco driving with current Eco driving ratio based on acceleration.
- Eco driving ratio based on acceleration
If the acceleration exceeds the Zone of Eco driving, the right side of the Eco Driving Indicator Zone Display will illuminate.
At this time, the Eco Driving Indicator Light will turn off.
- Zone of Eco driving
- Driving range
Displays driving range with remaining fuel. Use the displayed values as a reference only.
This distance is computed based on your average fuel consumption.
As a result, the actual distance that can be driven may differ from that displayed.
When only a small amount of fuel is added to the tank, the display may not be updated.
When refueling, turn the engine switch off. If the vehicle is refueled without turning the engine switch off, the display may not be updated.
■Eco Driving Indicator
Eco Driving Indicator will not operate under the following conditions:
- The shift lever is in any position other than D.
- The vehicle speed is approximately 80 mph (130 km/h) or higher.
Driving support system information display
■ Driving support system information
Select to display the operational status of the following systems:
- LTA (Lane Tracing Assist)
- LDA (Lane Departure Alert)
- PCS (Pre-Collision System)
- Dynamic radar cruise control
- RSA (Road Sign Assist) (if equipped)
■ Navigation system-linked display (if equipped)
Select to display the following navigation system-linked information:
- Route guidance to destination
- Compass display (heading- up display)
Audio system-linked display (if equipped)
Select to enable selection of an audio source or track on the meter using the meter control switches.
This menu icon can be set to be displayed/not displayed in .
Vehicle information display
■ Drive information
Displays drive information such as the following:
.png)
- Drive information type
- Drive information items
Displays the following depending on which drive information type and drive information items were selected in .
- After start
- Distance: Displays the distance driven since engine start
- Elapsed time: Displays the elapsed time since engine start
- Average vehicle speed: Displays the average vehicle speed since engine start
- After reset
- Distance: Displays the distance driven since the display was reset*
- Elapsed time: Displays the elapsed time since the display was reset*
- Average vehicle speed: Displays the average vehicle speed since the display was reset*
*: To reset, display the desired item and press and hold the OK meter control switch.
■ AWD operation status display (if equipped)
.png)
The illustration used is intended as an example, and may differ from the image that is actually displayed on the multi-information display.
- Torque distribution display
Displays the drive status of each wheel in 6 steps from 0 to 5.
Settings display
■ Meter display settings that can be changed
- Language
Select to change the language displayed.
- Units
Select to change the units of measure displayed.
- Eco Driving Indicator Light
Select to enable/disable the Eco Driving Indicator Light.
Fuel economy display
Select to change the average fuel consumption display between after start/after reset.
Select to display/not display the audio system linked display.
Select to change the displayed content of the following:
- Drive information type
Select to change the drive information type display between after start/after reset.
- Drive information items
Select to set the first and second items of the drive information display to any of the following: average vehicle speed/distance/elapsed time.
- Pop-up display
Select to enable/disable pop-up displays for each relevant system.
- Multi-information display off
Select to turn the multi-information display off.
To turn the multi-information display on again, press any of the following meter control switches
.
- Default setting
Select to reset the meter display settings to the default setting.
■Suspension of the settings display
-
Some settings cannot be changed while driving. When changing settings, park the vehicle in a safe place.
-
If a warning message is displayed, operation of the settings display will be suspended.
WARNING
■Cautions during setting up the display
If the engine is running when changing the display settings, ensure that the vehicle is parked in a place with adequate ventilation.
In a closed area such as a garage, exhaust gases including harmful carbon monoxide (CO) may collect and enter the vehicle.
This may lead to death or a serious health hazard.
NOTICE
■During setting up the display
To prevent battery discharge, ensure that the engine is running while setting up the display features.
Stop & Start system information
- Stop & Start system operation status notification
Displays the status of the Stop & Start system with a pop-up display.
- Stop & Start system settings
The length of time of the Stop & Start system will operate when the "A/C" switch of the air conditioning system is on can be set to 2 different levels in of the multi-information display.
Suggestion function (if equipped)
Displays suggestions to the driver in the following situations.
To select a response to a displayed suggestion, use the meter control switches.
■ Suggestion to enable the power back door (if equipped)
If the power back door system is disabled (setting on 
set to off) and the power back door switch on the instrument panel is operated, a suggestion message will be displayed asking if you wish to enable the power back door system.
To enable the power back door system, select "Yes".
After enabling the power back door system, press the power back door switch again to open or close the power back door.
■ Suggestion to turn off the headlights
If the headlights are left on for a certain amount of time after the engine switch has been turned off, if the headlight switch is in the "AUTO" position, a suggestion message will be displayed asking if you wish to turn the headlights off.
To turn the headlights off, select "Yes".
If the driver's door is opened after the engine switch is turned off, this suggestion message will not be displayed.
■Customization
Some functions can be customized.
Download Manual