Air outlet layout and operations
■ Location of air outlets
The air outlets and air volume changes according to the selected air flow mode.
.png)
■ Adjusting the position of and opening and closing the air outlets
Front center
.png)
Direct air flow to the left or right, up or down
Front right-hand side
.png)
- Direct air flow to the left or right, up or down
- Open the vent
- Close the vent
Front left-hand side
.png)
- Direct air flow to the left or right, up or down
- Close the vent
- Open the vent
Rear
.png)
- Direct air flow to the left or right, up or down
- Turn the knob to open or close the vents
WARNING
■To prevent the windshield defogger from operating improperly
Do not place anything on the instrument panel which may cover the air outlets. Otherwise, air flow may be obstructed, preventing the windshield defoggers from defogging.
.png)
Automatic air conditioning system
Air outlets are automatically selected and fan speed is automatically adjusted according to the set temperature setting.
Also, the display and button positions will differ depending on the type of the system.
Air conditioning controls
Vehicles without DUAL mode air conditioning system
.png)
- Temperature control switch
- Fan speed control switch
- "A/C" switch
- S-FLOW mode switch
- Outside/recirculated air mode switch
- Eco air conditioning mode switch
- Airflow mode control switch
- Rear window defogger and outside rear view mirror defoggers switch
- Windshield defogger switch
- Off switch
- Automatic mode switch
Vehicles with DUAL mode air conditioning system
.png)
- Left-hand side temperature control switch
- Right-hand side temperature control switch
- "SYNC" (synchronize) switch
- "A/C" switch
- S-FLOW mode switch
- Outside/recirculated air mode switch
- Airflow mode control switch
- Fan speed increases switch
- Fan speed decreases switch
- Eco air conditioning mode switch
- Rear window defogger and outside rear view mirror defoggers switch
- Windshield defogger switch
- Off switch
- Automatic mode switch
■ Adjusting the temperature setting
To adjust the temperature setting, turn the temperature control switch clockwise (warm) or counterclockwise (cool).
If "A/C" switch is not pressed, the system will blow ambient temperature air or heated air.
Vehicles with DUAL mode air conditioning system
The air conditioning system switches between individual and synchronized modes each time "SYNC" switch is pressed.
Synchronized modes (indicator on): The left-hand side temperature control switch can be used to adjust the temperature for the driver's and front passenger's side. At this time, operate the right-hand side temperature control switch to enter individual mode.
Individual modes (indicator off): The temperature for the driver's and front passenger's side can be adjusted separately.
■ Setting the fan speed
Vehicles without DUAL mode air conditioning system
To adjust the fan speed, turn the fan speed control switch clockwise (increase) or counterclockwise (decrease).
Pressing the off switch to turns off the fan.
Vehicles with DUAL mode air conditioning system
Operate the fan speed increases switch to increase the fan speed and the fan speed decrease switch to decrease the fan speed.
Pressing the off switch to turns off the fan.
■ Change the airflow mode
Press the airflow mode control switch.
The airflow mode changes as follows each time the switch is pressed.
.png)
- Upper body
- Upper body and feet
- Feet
- Feet and the windshield defogger operates
■ Switching between outside air and recirculated air modes
Press the outside/recirculated air mode switch.
■ Set cooling and dehumidification function
Press the "A/C" switch.
When the function is on, the indicator illuminates on the "A/C" switch.
■ Defogging the windshield
Defoggers are used to defog the windshield and front side windows.
Press the windshield defogger switch.
Set the outside/recirculated air mode switch to outside air mode if the recirculated air mode is used. (It may switch automatically.)
To defog the windshield and the side windows quickly, turn the air flow and temperature up.
To return to the previous mode, press the windshield defogger switch again when the windshield is defogged.
When the windshield defogger switch is on, the indicator illuminates on the windshield defogger switch.
■ Defogging the rear window and outside rear view mirrors
Defoggers are used to defog the rear window, and to remove raindrops, dew and frost from the outside rear view mirrors.
Press the rear window and outside rear view mirror defoggers switch.
The defoggers will automatically turn off after a while.
When the rear window and outside rear view mirror defoggers switch is on, the indicator illuminates on the rear window and outside rear view mirror defoggers switch.
■ Eco air conditioning mode
The air conditioning is controlled with low fuel consumption prioritized such as reducing fan speed, etc.
Press the eco air conditioning mode switch.
When the eco air conditioning mode is on, the indicator illuminates on the eco air conditioning mode switch.
■When the outside temperature exceeds 75ºF (24ºC) and the air conditioning system is on
- In order to reduce the air conditioning power consumption, the air conditioning system may switch to recirculated air mode automatically.
This may also reduce fuel consumption.
- Recirculated air mode is selected as a default mode when the engine switch is turned to ON.
- It is possible to switch to outside air mode at any time by pressing the outside air mode switch.
■Fogging up of the windows
- The windows will easily fog up when the humidity in the vehicle is high. Turning "A/C" on will dehumidify the air from the outlets and defog the windshield effectively.
- If you turn "A/C" off, the windows may fog up more easily.
- The windows may fog up if the recirculated air mode is used.
■When driving on dusty roads
Close all windows. If dust thrown up by the vehicle is still drawn into the vehicle after closing the windows, it is recommended that the air intake mode be set to outside air mode and the fan speed to any setting except off.
■Outside/recirculated air mode
- Setting to the recirculated air mode temporarily is recommended in preventing dirty air from entering the vehicle interior and helping to cool the vehicle when the outside air temperature is high.
- Outside/recirculated air mode may automatically switch depending on the temperature setting or the inside temperature.
■When the outside temperature falls to nearly 32ºF (0ºC)
The dehumidification function may not operate even when "A/C" switch is pressed.
■Ventilation and air conditioning odors
- To let fresh air in, set the air conditioning system to the outside air mode.
- During use, various odors from inside and outside the vehicle may enter into and accumulate in the air conditioning system. This may then cause odor to be emitted from the vents.
- To reduce potential odors from occurring:
- It is recommended that the air conditioning system be set to outside air mode prior to turning the vehicle off.
- The start timing of the blower may be delayed for a short period of time immediately after the air conditioning system is started in automatic mode.
- When parking, the system automatically switches to outside air mode to encourage better air circulation throughout the vehicle, helping to reduce odors that occur when starting the vehicle.
■Air conditioning system refrigerant
- A label regarding the refrigerant of the air conditioning system is attached to the engine compartment at the location shown in the following illustration.
.png)
- The meaning of each symbol on the label are as follows:
Caution
Air conditioning system
Air conditioning system lubricant type
Requires registered technician to service air conditioning system
Flammable refrigerant
■Customization
Some functions can be customized.
WARNING
■To prevent the windshield from fogging up
Do not use the windshield defogger switch during cool air operation in extremely humid weather.
The difference between the temperature of the outside air and that of the windshield can cause the outer surface of the windshield to fog up, blocking your vision.
■When the outside rear view mirror defoggers are operating
Do not touch the outside rear view mirror surfaces, as they can become very hot and burn you.
NOTICE
■To prevent battery discharge
Do not leave the air conditioning system on longer than necessary when the engine is off.
■When repairing/replacing parts of the air conditioning system
Have repair/replacement performed by your Toyota dealer.
When a part of the air conditioning system, such as the evaporator, is to be replaced, it must be replaced with a new one.
Using automatic mode
1. Press the automatic mode switch.
2. Adjust the temperature setting.
3. To stop the operation, press the off switch.
If the fan speed setting or air flow modes are operated, the automatic mode indicator goes off. However, automatic mode for functions other than that operated is maintained.
■Using automatic mode
Fan speed is adjusted automatically according to the temperature setting and the ambient conditions.
Therefore, the fan may stop for a while until warm or cool air is ready to flow immediately after the automatic mode switch pressed.
Front seat concentrated airflow mode (S-FLOW)
This function automatically controls the air conditioning airflow so that priority is given to the front seats. Unnecessary air conditioning is suppressed, contributing to increased fuel efficiency.
Front seat concentrated airflow mode operates in the following situations.
- No passengers are detected in the rear seats
- The windshield defogger is not operating
While operating,
illuminates.
■ Manually turning front seat concentrated airflow mode on/off
In front seat concentrated airflow mode, directing airflow to the front seats only and to all seats can be switched via switch operation. When the mode has been switched manually, automatic airflow control stops operating.
Press
on the air conditioning operation panel and switch the airflow.
- Indicator illuminated: Airflow to the front seats only
- Indicator off: Airflow to all the seats
■Operation of automatic airflow control
- In order to maintain a comfortable interior, airflow may be directed to seats without passengers immediately after the engine is started and at other times depending on the outside temperature.
- After the engine is started, if passengers move around inside or enter/exit the vehicle, the system cannot accurately detect the presence of passengers and automatic airflow control will not operate.
■Operation of manual airflow control
Even if the function is manually switched to directing airflow to only the front seats, when a rear seat is occupied, it may automatically direct airflow to all seats.
■To return to automatic airflow control
1. With the indicator off, turn the engine switch off.
2. After 60 minutes or more elapse, turn the engine switch to ON.
Windshield wiper de-icer (if equipped)
.png)
Prevent ice from building up on the windshield and wiper blades.
When the windshield wiper de-icer switch is on, the indicator illuminates on the windshield wiper de-icer switch.
The windshield wiper de-icer will automatically turn off after a period of time.
WARNING
■To prevent burns
Do not touch the glass at lower part of the windshield or to the side of the front pillars when the windshield wiper de-icer is on.
Download Manual