Adjusting the steering wheel and mirrors
Steering wheel
Adjustment procedure
Manual type
1. Hold the steering wheel and push the lever down.
2. Adjust to the ideal position by moving the steering wheel horizontally and vertically.
After adjustment, pull the lever up to secure the steering wheel.
Power type
Operating the switch moves the steering wheel in the following directions:
- Up
- Down
- Toward the driver
- Away from the driver
Horn
To sound the horn, press on or close to the 
mark.
■The steering wheel can be adjusted when (power type) The engine switch is in ACCESSORY or IGNITION ON mode.
■Automatic adjustment of the steering position (vehicles with driving position memory) A desired steering position can be entered to memory and recalled automatically by the driving position memory system.
■Power easy access system (vehicles with driving position memory) The steering wheel and driver's seat move in accordance with engine switch mode and the driver's seat belt condition.
| WARNING
■Caution while driving Do not adjust the steering wheel while driving. Doing so may cause the driver to mishandle the vehicle and cause an accident, resulting in death or serious injury. ■After adjusting the steering wheel (manual type) Make sure that the steering wheel is securely locked. Otherwise, the steering wheel may move suddenly, possibly causing an accident, and resulting in death or serious injury. Also, the horn may not sound if the steering wheel is not securely locked. |
Inside rear view mirror
The rear view mirror's position can be adjusted to enable sufficient confirmation of the rear view.
Adjusting the height of rear view mirror
The height of the rear view mirror can be adjusted to suit your driving posture.
Adjust the height of the rear view mirror by moving it up and down.
Anti-glare function
Responding to the level of brightness of the headlights of vehicles behind, the reflected light is automatically reduced.
Vehicles with garage door opener
Vehicles without garage door opener
Changing automatic anti-glare function mode
On/off
When the automatic anti-glare function is in ON mode, the indicator illuminates.
The function will set to ON mode each time the engine switch is turned to IGNITION ON mode.
Pressing the button turns the function to OFF mode. (The indicator also turns off.)
■To prevent sensor error
Vehicles without garage door opener
To ensure that the sensors operate properly, do not touch or cover them.
Vehicles with garage door opener
To ensure that the sensors operate properly, do not touch or cover them.
| WARNING
Do not adjust the position of the mirror while driving. Doing so may lead to mishandling of the vehicle and cause an accident, resulting in death or serious injury. |
Outside rear view mirrors
Adjustment procedure
1. To select a mirror to adjust, turn the switch.
- Left
- Right
2. To adjust the mirror, operate the switch.
- Up
- Right
- Down
- Left
Folding the mirrors
Push the mirror back in the direction of the vehicle's rear.
Linked mirror function when reversing (vehicles with driving position memory)
When the mirror select switch is in the "L" or "R" position, the outside rear view mirrors will automatically angle downwards when the vehicle is reversing in order to give a better view of the ground.
To disable this function, select neither "L" nor "R" of the mirror select switch.
■ Adjusting the mirror angle when the vehicle is reversing With the shift lever in R, adjust the mirror angle at a desired position.
The adjusted angle will be memorized and the mirror will automatically tilt to the memorized angle whenever the shift lever is shifted to R from next time.
The memorized downward tilt position of the mirror is linked to the normal position (angle adjusted with the shift lever in other than R). Therefore, if the normal position is changed after adjustment, the tilt position will also change.
When the normal position is changed, readjust the angle in reversing.
■Mirror angle can be adjusted when The engine switch is in ACCESSORY or IGNITION ON mode.
■When the mirrors are fogged up The outside rear view mirrors can be cleared using the mirror defoggers. Turn on the rear window defogger to turn on the outside rear view mirror defoggers.
■Automatic adjustment of the mirror angle (vehicles with driving position memory) A desired mirror face angle can be entered to memory and recalled automatically by the driving position memory.
■Auto anti-glare function (if equipped) When the anti-glare inside rear view mirror is set to automatic mode, the outside rear view mirrors will activate in conjunction with the anti-glare inside rear view mirror to reduce reflected light.
■Customization Some functions can be customized.
| WARNING
■Important points while driving Observe the following precautions while driving. Failure to do so may result in loss of control of the vehicle and cause an accident, resulting in death or serious injury.
■When a mirror is moving To avoid personal injury and mirror malfunction, be careful not to get your hand caught by the moving mirror. ■When the mirror defoggers are operating Do not touch the rear view mirror surfaces, as they can become very hot and burn you. |
Download Manual