Moving object detection (MOD) (if so equipped)

1. CAMERA button
WARNING
• Failure to follow the warnings and in-
structions for proper use of the Mov- ing Object Detection system could result in serious injury or death.
• The MOD system is not a substitute for proper vehicle operation and is not designed to prevent contact with objects surrounding the vehicle. When maneuvering, always use the outside mirrors and rearview mirror and turn and check the surroundings to ensure it is safe to maneuver.
• The system is deactivated at speeds above 6 mph (10 km/h). It is reacti- vated at lower speeds.
• The MOD system is not designed to detect surrounding stationary objects.
The MOD system can inform the driver of moving objects near the vehicle when backing out of garages, maneuvering in parking lots and in other such instances. The MOD system detects moving objects by using image processing technology on the image shown in the display.
MOD SYSTEM OPERATION The MOD system will turn on automatically under the following conditions: • When the shift lever is in the R (Reverse)
position. • When the CAMERA button is pressed to
activate the camera view on the display. • When vehicle speed decreases below ap-
proximately 6 mph (10 km/h) and the camera screen is displayed.
The MOD system operates in the following conditions when the camera view is displayed: • When the shift lever is in the P (Park) or N
(Neutral) position and the vehicle is stopped, the MOD system detects mov- ing objects in the bird’s-eye view. The MOD system will not operate if the out- side mirrors are moving in or out, in the stowed position, or if either front door is opened.
LHA5451
Front and bird’s-eye views
Monitor, climate, audio, phone and voice recognition systems 4-27
• When the shift lever is in the D (Drive) position and the vehicle speed is below approximately 6 mph (10 km/h), the MOD system detects moving objects in the front view.
• When the shift lever is in the R (Reverse) position and the vehicle speed is below approximately 6 mph (10 km/h), the MOD system detects moving objects in the rear view. The MOD system will not oper- ate if the liftgate is open.
The MOD system does not detect moving objects in the front-side view. The MOD icon is not displayed on the screen when in this view. When the MOD system detects moving ob- jects near the vehicle, a yellow frame will be displayed on the view where the objects are detected. While the MOD system con- tinues to detect moving objects, the yellow frame continues to be displayed.
NOTE: While the RCTA chime is beeping, the MOD system does not chime.
In the bird’s-eye view, the yellow frame O1 is displayed on each camera image (front, rear, right, left) depending on where mov- ing objects are detected. The yellow frame O2 is displayed on each view in the front view and rear view modes. A green MOD icon O3 is displayed in the view where the MOD system is operative. A gray MOD icon is displayed in the view where the MOD system is not operative. If the MOD system is turned off, the MOD icon O3 is not displayed.

Rear and bird’s-eye views

Rear and front-side views

Front-wide view / Rear-wide View
TURNING MOD ON AND OFF To turn the MOD system on or off:
1. Press the or button on the steering wheel and select “Settings” in the vehicle information display.
2. Using the scroll dial, select “Driver Assis- tance” and press the OK button.
3. Select “Parking Aids”.
4. Toggle ON or OFF “Moving Object” using the OK button. MOD SYSTEM LIMITATIONS
WARNING Listed below are the system limitations for MOD. Failure to operate the vehicle in accordance with these system limi- tations could result in serious injury or death.
• Do not use the MOD system when towing a trailer. The system may not function properly.
• Excessive noise (for example, audio system volume or open vehicle win- dow) will interfere with the chime sound, and it may not be heard.
• The MOD system performance will be limited according to environmental conditions and surrounding objects such as:
– When there is low contrast between background and the mov- ing objects.
– When there is a blinking source of light.
– When strong light such as another vehicle’s headlight or sunlight is present.
– When camera orientation is not in its usual position, such as when a mirror is folded.
– When there is dirt, water drops or snow on the camera lens.
– When the position of the moving objects in the display is not changed.
• The MOD system might detect flow- ing water droplets on the camera lens, white smoke from the muffler, moving shadows, etc.
• The MOD system may not function properly depending on the speed, di- rection, distance or shape of the moving objects.
• If your vehicle sustains damage to the parts where the camera is in- stalled, leaving it misaligned or bent, the sensing zone may be altered and the MOD system may not detect ob- jects properly.
• When the temperature is extremely high or low, the screen may not dis- play objects clearly. This is not a malfunction.
NOTE: The green MOD icon will change to or- ange if one of the following has oc- curred:
• When the system is malfunctioning.
• When the component temperature reaches a high level (icon will blink).
• When the RearView camera has detected a blockage (icon will blink). If the icon light continues to illuminate orange, have the MOD system checked. It is recommended that you visit a NISSAN dealer for this service.

SYSTEM MAINTENANCE
CAUTION
• Do not use alcohol, benzine or thin- ner to clean the camera. This will cause discoloration.
• Do not damage the camera as the monitor screen may be adversely affected.
If dirt, rain or snow accumulates on any of the cameras O1 , the MOD system may not operate properly. Clean the camera by wip- ing with a cloth dampened with a diluted mild cleaning agent and then wiping with a dry cloth.
VENTS
Adjust air flow direction for the center vents O1 , driver’s and passenger's side vents O2 , and rear passenger compartment vents O3 by moving the vent slide and/or vent assemblies. Open or close the vents using the dial.

Download Manual