Mirrors
3-36 Pre-driving checks and adjustments
AUTOMATIC ANTI-GLARE REARVIEW MIRROR (if so equipped) The inside mirror is designed so that it au- tomatically dims during nighttime condi- tions and according to the intensity of the headlights of the vehicle following you. The automatic anti-glare feature is activated when the ignition switch is in the ON position. The indicator light O2 will illuminate when the automatic anti-glare feature is operating.
NOTE: Do not hang any objects over the sen- sors O1 or apply glass cleaner to the sen- sors. Doing so will reduce the sensitivity of the sensors, resulting in improper operation.
The indicator light O2 will illuminate when the automatic anti-glare feature is operating. To turn off the automatic anti-glare feature, press the O button. The indicator light will turn off. To turn on the automatic anti-glare feature again, press the | button again. The in- dicator light will turn on. For additional information on HomeLink® Universal Transceiver operation, see “HomeLink® Universal Transceiver” (P. 2-121).
OUTSIDE MIRRORS The outside mirror remote control will op- erate only when the ignition switch is in the ACC or ON position. Push the switch O1 or O2 to select the left or right mirror. Adjust each mirror to the desired position using the large switch O3 . Push the switch O1 or O2 and make sure that the corresponding light is off, to pre- vent accidentally moving the mirror.
WARNING
• Objects viewed in the outside mirror on the passenger side are closer than they appear. Be careful when moving to the right. Using only this mirror could cause an accident. Use the in- side mirror or glance over your shoulder to properly judge distances to other objects.
• Do not adjust the mirrors while driv- ing. You could lose control of your ve- hicle and cause an accident.
Manual folding outside mirrors (if so equipped) Pull the outside mirror toward the door to fold it.
Power folding outside mirrors (if so equipped)
CAUTION
• Do not touch the mirrors while they
are moving. Your hand may be pinched, and the mirror may malfunction.
• Do not drive with the mirrors stored. You will be unable to see behind the vehicle.
Push the switch O1 to open the mirrors. Push the switch again to close the mirrors.
LPD2112 LPD3186
3-38 Pre-driving checks and adjustments
If one of the mirrors are manually operated or bumped, the mirror body can become loose at the pivot point. To correct elec- tronic mirror operation, cycle the mirrors by pushing the switch O1 until completely closed, then push the switch again until the mirrors are in the open position
Heated mirrors (if so equipped) The electric control type outside mirrors can be heated to defrost, defog, or de-ice for improved visibility. For additional infor- mation, see “Rear window and outside mir- ror (if so equipped) defroster switch” (P. 2-79).
Reverse tilt-down feature (if so equipped) The reverse tilt-down feature will turn both outside mirror surfaces downward to pro- vide better rear visibility close to the vehicle when the mirror control switch is in either the L or R position. The mirrors automatically return to their original position when you shift out of R (Reverse). The outside mirror surfaces will return to their original position when one of the fol- lowing conditions has occurred:
• The shift lever is moved to any position other than R (Reverse).
• The outside mirror control switch is set to the neutral or center position.
• The ignition switch is placed in the OFF position.
NOTE: If the outside mirror control switch is in the center position, the mirror surface will NOT turn downward when the shift lever is moved to R (Reverse).
For additional information, see “Memory seat” (P. 3-39).
The memory seat system has two features: • Memory storage function • Entry/exit function
Download Manual