Engine Fluids and Lubricants
|
Component |
Fluid, Lubricant, or Genuine Part |
|
Engine Coolant |
We recommend using Mopar® Antifreeze/Coolant 10 Year/150,000 Mile (240,000 km) Formula OAT (Organic Additive Technology) meeting the requirements of the manufacturer Material Standard MS.90032. |
|
Intercooler |
We recommend using Mopar® Antifreeze/Coolant 10 Year/150,000 Mile (240,000 km) Formula OAT (Organic Additive Technology) or equivalent meeting the requirements of the manufacturer Material Standard MS.90032. |
|
Engine Oil — 2.0L Engine |
We recommend using Mopar® API SP/GF-6A Certified SAE 5W-30 Full Synthetic Engine Oil which meets the requirements of the manufacturer Material Standard MS-13340. Equivalent full synthetic SAE 5W-30 API SP engine oil can be used but must have the API Donut trademark . |
|
CAUTION! |
|
|
Failure to use the recommended API SP/GF-6A or equivalent oil can cause engine damage not covered by the vehicle warranty. |
|
|
Engine Oil – 3.6L & 5.7L Engine |
We recommend using Mopar® SAE 0W-20 Full Synthetic Engine Oil which meets the requirements of the manufacturer Material Standard MS-6395. Equivalent full synthetic SAE 0W-20 engine oil can be used but must have the API Starburst trademark . |
|
Engine Oil Filter |
We recommend using a Mopar® Engine Oil Filter. If a Mopar® Engine Oil Filter is unavailable only use filters that meet or exceed SAE/USCAR-36 Filter Performance Requirements. |
|
Fuel Selection — 2.0L Engine |
87 Octane (R+M)/2 Method, 0-15% Ethanol. |
|
Fuel Selection – 3.6L Engine |
87 Octane (R+M)/2 Method, 0-15% Ethanol (Do not use E-85). |
|
Fuel Selection – 5.7L Engine |
89 Octane Recommended - 87 Octane Acceptable (R+M)/2 Method, 0-15% Ethanol (Do not use E-85). |
Download Manual