2021 Honda CR-V Owners Manual - Parking Your Vehicle

Parking Your Vehicle

When Stopped

Depress the brake pedal firmly.

With the brake pedal depressed, pull up the electric parking brake switch slowly, but fully.

Move the shift lever from D to .

Turn off the engine.

u The parking brake and brake system indicator goes off in about 15 seconds.

Always confirm the electric parking brake is set, in particular if you are parked on an incline.

uuParking Your VehicleuWhen Stopped

uuParking Your VehicleuCross Traffic Monitor*

Monitors the rear corner areas using the radar sensors when reversing, and alerts you if a vehicle approaching from a rear corner is detected.

The system is convenient when you are backing out of a parking space.

Not available on all models

uuParking Your Vehicle uCross Traffic Monitor *

How the System Works

The system activates when:

The power mode is in ON.

The Cross Traffic Monitor system is turned on.

2 Cross Traffic Monitor On and Off P. 557

The transmission is in R.

Your vehicle is moving at 3 mph (5 km/h) or lower.

When a vehicle is detected approaching from a rear corner, Cross Traffic Monitor alerts you with a buzzer and a displayed warning.

The system will not detect a vehicle that approaches from directly behind your vehicle, nor will it provide alerts about a detected vehicle when it moves directly behind your vehicle.

The system does not detect or provide alerts for a vehicle that is moving away from your vehicle, and it may alert for pedestrians, bicycles, or stationary objects.

* Not available on all models

Continued 555

uuParking Your VehicleuCross Traffic Monitor*

An arrow icon appears on the side a vehicle is approaching on the audio/information screen.

uuParking Your Vehicle uCross Traffic Monitor *

You can switch on and off the system using the audio/information screen.

Select .

Select Settings.

Select Camera.

Select Cross Traffic Monitor.

Select On or Off, then select OK.

The system can also be turned on and off on the audio/information screen by pressing the CTM icon.