Checking and Maintaining Wiper Blades
Checking Wiper Blades
If the wiper blade rubber has deteriorated, it will leave streaks, become noisy, and the hard surfaces of the blade may scratch the window glass.
Lift the driver side wiper arm first, then the passenger side.
Press up on and hold the tab, then slide the holder off the wiper arm.
uuChecking and Maintaining Wiper BladesuChanging the Front Wiper Blade Rubber
Pull the end of the wiper blade to the direction of the arrow in the image until it unfastens from the holder’s end cap.
Pull the wiper blade in the opposite direction to slide it out of the holder.
Slide the new wiper blade onto the holder from the bottom end.
u The tab on the holder should fit in the indent of the wiper blade.
Slide the holder onto the wiper arm, then push down the lock tab.
Lower the passenger side wiper arm first, then the driver side.
uuChecking and Maintaining Wiper BladesuChanging the Rear Wiper Blade Rubber
Raise the wiper arm off.
Pivot the bottom end of the holder up until it comes off from the wiper arm.
Slide the blade out of the holder.
Remove the retainers from wiper blade and mount to a new rubber blade.
uuChecking and Maintaining Wiper Blades uChanging the Rear Wiper Blade Rubber
5. Slide the new wiper blade onto the holder.
u Make sure it is engaged correctly, then install the wiper blade assembly onto the wiper arm.
Download Manual