Gauges and Displays
Gauges include the speedometer, fuel gauge, and other related indicators. They are displayed when the power mode is in ON.
Displays your driving speed in mph (U.S.) or km/h (Canada).
Displays the amount of fuel left in the fuel tank.
Displays the temperature of the engine coolant.
uuGauges and DisplaysuDriver Information Interface
The driver information interface shows the odometer, trip meter, outside temperature, and other gauges.
It also displays important messages such as warnings and other helpful information.
Press the
(home) button, then roll the left selector wheel to scroll to the content you want to see. Press the left selector wheel to see detailed information.
140
uuGauges and DisplaysuDriver Information Interface
Tachometer
P. 151
Range & Fuel
P. 144
Speed & Time
P. 146
Warnings
P. 149
Safety Support P. 158
Maintenance
P. 149
Rear Seat Belts
P. 153
Audio
P. 152
Driver Attention P. 154
Left Selector Wheel
(home) Button
Phone
P. 150
Driving Support P. 157
Roll the left selector wheel.
Navigation
P. 148
Traffic Sign
P. 153
Continued
141
uuGauges and DisplaysuDriver Information Interface
Press the TRIP button to change the display.
Shows the total number of miles or kilometers that your vehicle has accumulated.
uuGauges and DisplaysuDriver Information Interface
Shows the total number of miles or kilometers driven since the last reset. Meters A and B can be used to measure two separate trips.
To reset a trip meter, display it, then press and hold the TRIP Button. The trip meter is reset to 0.0.
Shows the outside temperature in Fahrenheit (U.S.) or Celsius (Canada).
Adjust the temperature reading by up to ±5°F or ±3°C if the temperature reading seems incorrect.
Continued 143
uuGauges and DisplaysuDriver Information Interface
Roll the left selector wheel to switch between trip computer A and trip computer B.
Trip Computer A
Trip Computer B
Range
Average Fuel Economy
Instant Fuel Economy
Trip Meter
Left Selector Wheel
Roll the left selector wheel.
uuGauges and DisplaysuDriver Information Interface
Shows the total number of miles or kilometers driven since the last reset. Meters A and B can be used to measure two separate trips.
To reset the trip meter, display it, press the left selector wheel and then select Reset.
u The trip meter is reset to 0.0.
Shows the estimated average fuel economy of each trip meter in mpg or l/100 km. The display is updated at set intervals. When a trip meter is reset, the average fuel economy is also reset.
Shows the instant fuel economy as a bar graph in mpg or l/100 km.
Shows the estimated distance you can travel on the remaining fuel. This estimated distance is based on the vehicle’s current fuel economy.
Continued 145
uuGauges and DisplaysuDriver Information Interface
Roll the left selector wheel to switch between trip computer A and trip computer B.
Trip Computer A
Average Speed Elapsed Time
Trip Meter
Trip Computer B
Left Selector Wheel
Roll the left selector wheel.
uuGauges and DisplaysuDriver Information Interface
2 Trip meter P. 145
Shows the time elapsed since Trip A or Trip B was reset.
Shows the average speed in mph or km/h since Trip A or Trip B was reset.
Continued 147
uuGauges and DisplaysuDriver Information Interface
Shows the compass screen.
When driving guidance is provided by the navigation system*, Android Auto or Apple CarPlay, turn-by-turn directions to your destination appear.
2 Refer to the Navigation System Manual
2 Android Auto P. 321
2 Apple CarPlay P. 314
148
uuGauges and DisplaysuDriver Information Interface
2 Driver Information Interface Warning and Information Messages P. 109
Shows the remaining oil life and Maintenance MinderTM.
2 Maintenance MinderTM P. 543
Continued 149
uuGauges and DisplaysuDriver Information Interface
Shows the current phone information.
2 Bluetooth® HandsFreeLink® P. 375
uuGauges and DisplaysuDriver Information Interface
Shows the number of engine revolutions per minute.
Enables you to show another unit on the driver information interface, head-up display* and audio/information screen and set the displayed measurements to read in either miles and km, mph and km/h.
Press and hold the left selector wheel when you select the Tachometer on the driver information interface. Each time you do this, the unit will change from miles and mph to km and km/h or vice versa. After this, a confirmation screen will appear for a few seconds.
Continued 151
uuGauges and DisplaysuDriver Information Interface
Models with SPORT mode
When the turbo charger is producing boost, this meter shows the boost pressure.
When the SPORT mode is turned on while the tachometer appears, the turbo meter appears on the driver information interface.
Shows the current audio information.
2 Audio System Basic Operation P. 253
uuGauges and DisplaysuDriver Information Interface
Shows the traffic sign recognition system.
2 Traffic Sign Recognition System P. 500
Appears when any of the rear seat belts are latched or unlatched.
2 Seat Belt Reminder P. 39
Continued
153
uuGauges and DisplaysuDriver Information Interface
determines that the vehicle is being driven in such a manner, it will display the
degree of the driver’s attention on the driver information interface.
When you select Driver Attention on the driver information interface, bars on it light up in white to indicate the degree of the driver’s attention.
2 Accessing contents in the main display
P. 140
uuGauges and DisplaysuDriver Information Interface
If two bars light up, the Driver Attention Level Low message will appear.
If one bar lights up, the Driver Attention Level Low. Time For A Break message will appear, a beep will sound, and the steering wheel will vibrate.
If this message appears, stop in a safe location and rest for as long as needed.
The message will disappear when the left selector wheel is pressed or when the system has determined that the driver is driving normally.
If the driver does not take a break and the monitor continues to detect that the driver is very tired, the message will appear again after approximately 15 minutes, accompanied by a beep and steering wheel vibrations.
The message does not appear when the traveling time is 30 minutes or less.
Continued
155
uuGauges and DisplaysuDriver Information Interface
2 Lane Keeping Assist System (LKAS) P. 488
You can change the Driver Attention Monitor settings. Select Tactile And Audible Alert, Tactile Alert, or OFF.
2 Customized Features P. 352
uuGauges and DisplaysuDriver Information Interface
Shows the interval between your vehicle and the vehicle detected ahead.
Informs you whether ACC with Low Speed Follow and/or LKAS is activated or not. If ACC with Low Speed Follow is activated, the set following interval is displayed. If LKAS is activated, the displayed lane marks change to indicate that LKAS is activated.
2 Adaptive Cruise Control (ACC) with Low Speed Follow P. 472
2 Lane Keeping Assist System (LKAS) P. 488
Continued 157
uuGauges and DisplaysuDriver Information Interface
The following colors indicate the state of any of the above mentioned systems:
uuGauges and DisplaysuHead-Up Display*
Shows the current mode for ACC with Low Speed Follow and LKAS, tachometer, traffic sign recognition system, shift position indicator, M (sequential mode*/7- speed manual shift mode*) Indicator/Gear Selection Indicator, compass or turn-by- turn directions along with the vehicle speed. You can choose which item to be displayed using the
(HUD) button on the steering wheel. They are displayed when the power mode is in ON.
To turn the head-up display on and off: Press the HUD button on the driver side control panel.
The display can be moved up and down to become level with your eyes.
To raise or lower the head-up display: Press the or button until the desired position is reached.
* Not available on all models
Continued
159
uuGauges and DisplaysuHead-Up Display*
The display also shows the following warnings.
2 Lane Keeping Assist System (LKAS)
P. 488
Flash when the BRAKE message appears on the driver information interface.
2 Collision Mitigation Braking SystemTM (CMBSTM) P. 458
2 Adaptive Cruise Control (ACC) with Low Speed Follow P. 472
2 Low Speed Braking Control * P. 467
160
uuGauges and DisplaysuHead-Up Display*
Each time you press the
(HUD) button on the steering wheel, the head-up display content will change.
Head-Up Display
Current Mode for ACC with Low Speed Follow and the LKAS, Vehicle Speed, Traffic Sign Recognition System
Vehicle Speed, Traffic Sign Recognition System
Tachometer, Shift Position Indicator, M (sequential mode*/7-speed manual shift mode*) Indicator/Gear Selection Indicator, Vehicle Speed, Traffic Sign Recognition System
(HUD)
Button
Traffic Sign Recognition System, Vehicle Speed
Turn-by-Turn Directions, Vehicle Speed, Traffic Sign Recognition System
Compass, Vehicle Speed, Traffic Sign Recognition System
* Not available on all models
Continued
161
uuGauges and DisplaysuHead-Up Display*
Shows your driving speed in mph or km/h.
Shows the number of engine revolutions as a bar graph.
Shows the current shift position.
2 Shift Position Indicator P. 88
Shows the current mode for the sequential mode*/7-speed manual shift mode*.
Shows the current mode for ACC with Low Speed Follow and LKAS.
2 Adaptive Cruise Control (ACC) with Low Speed Follow P. 472
2 Lane Keeping Assist System (LKAS) P. 488
uuGauges and DisplaysuHead-Up Display*
Shows the compass screen.
When driving guidance is provided by the navigation system, Android Auto or Apple CarPlay, turn-by-turn directions to your destination appear.
2 Refer to the Navigation System Manual
2 Android Auto P. 321
2 Apple CarPlay P. 314
Shows the traffic sign recognition system.
2 Traffic Sign Recognition System P. 500
164
Download Manual