Instrument cluster
Warning lights and indicators
The units used on the speedometer and some indicators may differ depending on where the vehicle is sold.
The warning lights and indicators on the instrument cluster and center panel inform the driver of the status of the vehicle’s vari- ous systems. For the purpose of explanation, the following illustration dis- plays all warning lights and indicators illuminated.
Warning lights inform the driver of malfunctions in the indicated vehi- cle’s systems.
Warning lights
*1: These lights turn on when the engine switch is turned to ON to indicate that a system check is being performed. They will turn off after the engine is started, or after a few seconds. There may be a malfunction in a system if the lights do not come on, or do not turn off. Have the vehicle inspected by your Toyota dealer.
*2: The light illuminates on the multi-information display. *3: The light comes on to indicate a malfunction.
Low fuel level warning light (P. 474)
*1 Tire pressure warning light (P. 474)
*1 Seat belt reminder light (P. 474)
*1 Master warning light (P. 474)
The indicators inform the driver of the operating state of the vehicle’s various systems.
Indicators
*1: These lights turn on when the engine switch is turned to ON to indicate that a system check is being performed. They will turn off after the engine is started, or after a few seconds. There may be a malfunction in a system if the lights do not come on, or do not turn off. Have the vehicle inspected by your Toyota dealer.
*2: This light illuminates on the multi-information display. *3: The light flashes to indicate that the system is operating. *4: In order to confirm operation, the BSM outside rear view mirror indicators
illuminate in the following situations: • When the engine switch is turned to ON, the BSM function is enabled on
the screen of the multi-information display. • When the BSM function is enabled on the screen of the multi-infor-
mation display, the engine switch is turned to ON. If the system is functioning correctly, the BSM outside rear view mirror indicators will turn off after a few seconds. If the BSM outside rear view mirror indicators do not illuminate or do not turn off, there may be a malfunction in the system. If this occurs, have the vehicle inspected by your Toyota dealer.
*5: This light illuminates on the center panel. *6: This light turns on when the system is off.
(if equipped)
High speed four-wheel drive indicator (P. 317)
*1, 5 “AIR BAG ON/OFF” indi- cators (P. 51)
(if equipped) Low speed four-wheel drive indicator (P. 317) (if equipped)
“TOW/HAUL” indicator (P. 222)
(if equipped)
Center differential lock indicator (P. 317)
*2 Low outside tempera- ture indicator (P. 94)
*1
(if equipped)
“AUTO LSD” indicator (P. 322, 325)
932. Instrument cluster
2
Instrum ent cluster
SEQUOIA_OM_USA_OM0C047U
WARNING ■ If a safety system warning light does not come on
Should a safety system light such as the ABS and SRS warning light not come on when you start the engine, this could mean that these systems are not available to help protect you in an accident, which could result in death or serious injury. Have the vehicle inspected by your Toyota dealer immedi- ately if this occurs.
Gauges and meters
1 Tachometer
Displays the engine speed in revolutions per minute
2 Engine oil pressure gauge
Displays the engine oil pressure
3 Outside temperature display
Displays the outside temperature within the range of -40 °F (-40 °C) to 122 °F (50 °C). Low outside temperature indicator comes on when the ambient temperature is 37 ° F (3 °C) or lower.
4 Multi-information display
Presents the driver with a variety of vehicle data (P. 98)
Displays warning messages in case of a malfunction (P. 481)
5 Voltmeter
Displays the charge state
6 Speedometer
Displays the vehicle speed
7 Odometer/Trip meter switching and trip meter resetting button P. 95
8 Fuel gauge
Displays the quantity of fuel remaining in the tank
Odometer and trip meter display P. 95
10 Shift position and shift range display
Displays the selected shift position or selected shift range (P. 220)
11 Engine coolant temperature gauge
Displays the engine coolant temperature
12 Instrument panel light control button (P. 96)
Changing the odometer/trip meter display
Pressing the button changes the display change button display as follows.
■ Odometer
Displays the total distance the vehicle has been driven.
■ Trip meter A*/trip meter B*
Displays the distance the vehicle has been driven since the meter was last reset. Trip meters A and B can be used to record and dis- play different distances independently.
*: Press and hold the display change button to reset.
Changing the odometer/trip meter display
96 2. Instrument cluster
SEQUOIA_OM_USA_OM0C047U
The brightness of the instrument panel lights can be adjusted. Pressing the button will adjust brightness of the instrument panel light.
Short press: 1 step change of brightness level. Long press: continues change of brightness level until released.
■The meters and display illuminate when
The engine switch is in ON.
■ Instrument panel brightness adjustment
When the tail lights are turned on, the display’s brightness will be reduced slightly unless the meter brightness level adjustment is set to the brightest setting.
■Outside temperature display
● In the following situations, the correct outside temperature may not be dis-
played, or the display may take longer than normal to change. • When stopped, or driving at low speeds (less than 12 mph [20 km/h]) • When the outside temperature has changed suddenly (at the entrance/
exit of a garage, tunnel, etc.) ●When “--” or “E” is displayed, the system may be malfunctioning. Take your
vehicle to your Toyota dealer.
■Liquid crystal display
Small spots or light spots may appear on the display. This phenomenon is characteristic of liquid crystal displays, and there is no problem continuing to use the display.
Instrument panel light control
WARNING
■The information display at low temperatures
Allow the interior of the vehicle to warm up before using the liquid crystal information display. At extremely low temperatures, the information display monitor may respond slowly, and display changes may be delayed. For example, there is a lag between the driver’s shifting and the new gear number appearing on the display. This lag could cause the driver to down- shift again, causing rapid and excessive engine braking and possibly an accident resulting in personal death or injury.
NOTICE
■To prevent damage to the engine and its components
●Do not let the indicator needle of the tachometer enter the red zone, which indicates the maximum engine speed.
●The engine may be overheating if the engine coolant temperature gauge is in the red zone (H). In this case, immediately stop the vehicle in a safe place, and check the engine after it has cooled completely. (P. 515)
■Voltmeter
When the voltmeter indicates 19 V or higher or 9 V or lower while the engine is running, there may be a battery or charging system malfunction. Have the vehicle inspected at your Toyota dealer.
■Engine oil pressure gauge
When the value of the engine oil pressure gauge drops while the engine is running, stop the vehicle in a safe place immediately and check the amount of engine oil. (P. 418) When the oil pressure drops even though the engine oil amount has not decreased, or if the oil pressure does not increase when engine oil is added, contact your Toyota dealer, as there may be a problem with the lubri- cation system.
Multi-information display
The multi-information display presents the driver with a variety of vehi- cle data. ● Menu icons
Displays the following informa- tion when an icon is selected. Some of the information may be displayed automatically depending on the situation.
Drive information Select to display various drive data. (P. 99)
Navigation system-linked display (if equipped) Select to display the following navigation system-linked information. • Route guidance • Compass display (north-up display/heading-up display)
Audio system-linked display Select to enable selection of an audio source or track on the meter using the meter control switches.
Vehicle information • LDA (Lane Departure Alert) (P. 268) • Dynamic radar cruise control (P. 276) • Display the operational status of the tire inflation pressure.
(P. 429)
Warning message display Select to display warning messages and measures to be taken if a malfunction is detected. (P. 481)
Settings display Select to change the meter display settings and the operation set- tings of some vehicle functions. (P. 100)
Display contents
■ Operating the meter control switches
Select an item/change pages Press: Enters/Sets Press and hold: Resets Switch menu/Displays the top screen Returns to the previous screen
● Average fuel economy (Total Average*/Tank Average/Trip Average) Displays the average fuel consumption since the function was reset, the vehicle was refueled, or the engine was started, respec- tively
Use the displayed average fuel consumption as a reference. ● Distance (driving range/after start)
Displays the estimated maximum distance that can be driven with the quantity of fuel remaining or the distance driven after the engine was started respectively. • This distance is computed based on your average fuel consumption. As
a result, the actual distance that can be driven may differ from that dis- played.
• When only a small amount of fuel is added to the tank, the display may not be updated. When refueling, turn the engine switch off. If the vehicle is refueled with- out turning the engine switch off, the display may not be updated.
● Current fuel consumption Displays the current rate of fuel consumption
Drive information
100 2. Instrument cluster
SEQUOIA_OM_USA_OM0C047U
● Average speed (Average Speed*/Trip Average Speed) Displays the average since engine was started or the average since the function was reset, respectively
● Elapsed Time (Total Time*/Trip Time) Displays the engine was started or the elapsed time since the func- tion was reset, respectively
● Digital speedometer ● Display off
A blank screen is displayed *: Resetting procedures:
• Select a function to be reset using the meter control switch and then press and hold the center button to reset.
• If there is more than one function that can be reset, check boxes will be displayed next to the functions.
The settings of the following items can be changed, refer to P. 548. For functions that can be enabled or disabled, the function switches between on and off each time is pressed.
● LDA (Lane Departure Alert) (P. 551) • LDA Sensitivity
Select to set up the LDA (Lane Departure Alert) sensitivity. • Sway warning
Select to enable/disable the sway warning function. • Sway warning sensitivity
Select to set up the sway warning sensitivity. ● PCS (Pre-Collision System) (P. 551)
• PCS Select to enable/disable the PCS (Pre-Collision System) function.
• Sensitivity Select to set up the PCS (Pre-Collision System) sensitivity.
● BSM (Blind Spot Monitor) (P. 552) Select to enable/disable the Blind Spot Monitor function.
● RCTA (Rear Cross Traffic Alert) (P. 552) Select to enable/disable the Rear Cross Traffic Alert function.
Settings display
1012. Instrument cluster
2
Instrum ent cluster
SEQUOIA_OM_USA_OM0C047U
● Vehicle Settings • Brightness (P. 552)
Select to set up the BSM (Blind Spot Monitor) outside rear view mirror indicators brightness.
• RCTA volume (P. 552) Select to set up the RCTA (Rear Cross Traffic Alert) sensitivity.
• Maintenance system (U.S.A. only) Select to reset the message after the required maintenance is per- formed. (P. 408)
● Meter settings • Language
Select to change the language on the display. • Units
Select to change the unit of measure for fuel consumption and tempera- ture.
• Switch settings You can register 1 screen as the top screen. To register, press and hold
while the desired screen is displayed. • Drive information 1 and 2
Select to select up to 2 items that will be displayed on a Drive informa- tion screen, up to 2 Drive information screens can be set.
• Pop-up display Select to set the following pop-up displays, which may appear in some situations, on/off. • Instrument panel brightness adjustment display • Route guidance display of the navigation system-linked system (if
equipped) • Incoming call display of the hands-free phone system
• Accent color Select to change the accent colors on the screen, such as the cursor color.
• Default settings Registered or changed meter settings will be deleted or returned to their default setting.
102 2. Instrument cluster
SEQUOIA_OM_USA_OM0C047U
■Setting items
● “Vehicle Settings” and “Meter Settings” setting items are not selectable
during driving and cannot be operated. Also, the settings screen is temporarily canceled in the following situations. • A warning message is displayed. • The vehicle starts off.
●Settings for functions not equipped to the vehicle are not displayed. ●When a function is turned off, the related settings for that function are not
selectable.
■Pop-up display
In some situations, such as when a switch operation is performed, a pop-up display will be temporarily displayed on the multi-information display.
■When disconnecting and reconnecting battery terminals
The drive information will be reset.
■Trip Summary display
When the engine switch is turned off, each of the following will be displayed on the multi-information display, and will extinguish after approximately 30 seconds. ●Distance traveled ●Average fuel economy ●Driving range
■Tire inflation pressure
● It may take a few minutes to display the tire inflation pressure after the
engine switch is turned to ON. It may also take a few minutes to display the tire inflation pressure after inflation pressure has been adjusted.
● “---” may be displayed if the tire position information cannot be determined due to unfavorable radio wave conditions.
●Tire inflation pressure changes with temperature. The displayed values may also be different from the values measured using a tire pressure gauge.
■Liquid crystal display
Small spots or light spots may appear on the display. This phenomenon is characteristic of liquid crystal displays, and there is no problem continuing to use the display.
1032. Instrument cluster
2
Instrum ent cluster
SEQUOIA_OM_USA_OM0C047U
WARNING
■Caution for use while driving
●When operating the multi-information display while driving, pay extra attention to the safety of the area around the vehicle.
●Do not look continuously at the multi-information display while driving as you may fail to see pedestrians, objects on the road, etc. ahead of the vehicle.
■Cautions during setting up the display
As the engine needs to be running during setting up the display, ensure that the vehicle is parked in a place with adequate ventilation. In a closed area such as a garage, exhaust gases including harmful carbon monoxide (CO) may collect and enter the vehicle. This may lead to death or a serious health hazard.
NOTICE
■During setting up the display
To prevent battery discharge, ensure that the engine is running while setting up the display features.
104 2. Instrument cluster
SEQUOIA_OM_USA_OM0C047U
Fuel consumption information
Press the “APPS” button, and then select “Eco” on the screen.
■ Trip information
If the “Past Record” screen is displayed, select “Trip Information”.
Resetting the consumption data Average vehicle speed since the engine was started Elapsed time since the engine was started Fuel consumption in the past 15 minutes Cruising range (P. 105) Current fuel consumption
Average fuel consumption for the past 15 minutes is divided by color into past averages and averages attained since the engine switch was last turned to ON. Use the displayed average fuel con- sumption as a reference.
These images are examples only.
The fuel consumption information can be displayed on the navi- gation system or multimedia system screen.
Display the trip information or past record screen
Fuel consumption
1052. Instrument cluster
2
Instrum ent cluster
SEQUOIA_OM_USA_OM0C047U
■Past record
If the “Trip Information” screen is displayed, select “Past Record”.
Resetting the past record data Best recorded fuel consump- tion Average fuel consumption (if equipped) Previous fuel consumption record Update the average fuel consumption data
The average fuel consumption history is divided by color into past averages and the average fuel consumption since the last updated. Use the displayed average fuel consumption as a reference.
These images are examples only.
■Resetting the data
The fuel consumption data can be deleted by selecting “Clear”.
■Updating the past record data
Update the average fuel consumption by selecting “Update” to measure the current fuel consumption again.
■Cruising range
Displays the estimated maximum distance that can be driven with the quan- tity of fuel remaining. This distance is computed based on your average fuel consumption. As a result, the actual distance that can be driven may differ from that displayed.
106 2. Instrument cluster