Gear selector override
If a malfunction occurs and the gear selector cannot be moved out of the PARK position, you can use the following procedure to temporarily move the gear selector:
1. Turn the engine OFF.
2. Firmly apply the parking brake.
3. Using a small screwdriver or similar tool, remove the gear selector override access cover (located on the right side of the gear selector housing).
Gear Selector Override Access Cover
4. Turn the ignition switch to the ACC or ON/RUN position, but do not start the engine.
5. Press and maintain firm pressure on the brake pedal. 6. Insert the screwdriver or similar tool into the access
port, and push and hold the override release lever forward.
7. Move the gear selector to the NEUTRAL position. 8. The vehicle may then be started in NEUTRAL. 9. Reinstall the gear selector override access cover.
Download Manual