Door locks
Manual Door Locks
Use the manual door lock knob to lock the doors from inside the vehicle. If the lock knob is down when the door is closed, the door will lock. Make sure the keys are not inside the vehicle before closing the door.

Manual Door Lock Knob
WARNING!
• For personal security and safety in the event of an collision, lock the vehicle doors as you drive as well as when you park and leave the vehicle.
• Never leave children alone in a vehicle, or with access to an unlocked vehicle. Allowing children to be in a vehicle unattended is dangerous for a number of reasons. A child or others could be seriously or fatally injured. Children should be warned not to touch the parking brake, brake pedal or the gear selector.
• Do not leave the key fob in or near the vehicle, or in a location accessible to children. A child could oper- ate power windows, other controls, or move the vehicle.
CAUTION!
Always remove the key fobs from the vehicle and lock all doors when leaving the vehicle unattended.
Power Door Locks
A power door lock switch is located on the driver’s and front passenger’s door panel. Push these switches to lock or unlock the doors and liftgate.
NOTE: To prevent from locking the key in the vehicle, the power door lock switch will not operate when the key is in the ignition and either front door is open. A chime will sound as a reminder to remove the key.

Driver Power Door Lock Switch
1 — Unlock Doors And Liftgate 2 — Lock Doors And Liftgate
Auto Lock Doors — If Equipped
The Automatic Door Lock feature default condition is enabled. When enabled, the door locks will lock automati- cally when the vehicle’s speed exceeds 15 mph (24 km/h).
Auto Lock Doors Programming
The Automatic Door Lock feature can be enabled or disabled as follows:
• For vehicles equipped with the instrument cluster dis- play, refer to “Instrument Cluster Display — If Equipped/Personal Settings (Customer Programmable Features)” in “Getting To Know Your Instrument Panel” for further information.
• For vehicles not equipped with the instrument cluster display, perform the following procedure: 1. Close all doors and place the key in the ignition. 2. Within 15 seconds, place the ignition between LOCK
and ON/RUN and then back to LOCK four times, ending up in the LOCK position (do not start the engine).
3. Within 30 seconds, push the power door lock switch to lock the doors.
4. A single chime will indicate the completion of the programming.
5. Repeat these steps if you want to return this feature to its previous setting.
NOTE: • If you do not hear the chime, it means that the system
did not enter the programming mode and you will need to repeat the procedure.
• Use the Automatic Door Lock feature in accordance with local laws.
Automatic Unlock Doors On Exit
The doors will unlock automatically if:
• The Automatic Unlock Doors On Exit feature is enabled.
• The transmission was in gear, and the vehicle speed returned to 0 MPH (0 km/h).
• The transmission is in NEUTRAL or PARK.
• The driver’s door is opened.
• The doors were not previously unlocked.
Automatic Unlock Doors On Exit Programming
The Automatic Unlock Doors On Exit feature can be enabled or disabled as follows: • For vehicles equipped with the instrument cluster dis-
play, refer to “Instrument Cluster Display — If Equipped/Personal Settings (Customer-Programmable Features)” in “Getting To Know Your Instrument Panel” for further information.
• For vehicles not equipped with the instrument cluster display, perform the following procedure:
1. Close all doors and place the key in the ignition. 2. Within 15 seconds, place the ignition between LOCK and ON/RUN and then back to LOCK five times, ending up in the ON/RUN position (do not start the engine).
3. Within 30 seconds, push the power door unlock switch to unlock the doors.
4. A single chime will indicate the completion of the programming.
5. Repeat these steps if you want to return this feature to its previous setting.
NOTE:
• If you do not hear the chime, it means that the system
did not enter the programming mode and you will need to repeat the procedure.
• Use the Automatic Unlock Doors On Exit feature in accordance with local laws.
Child-Protection Door Lock System — Rear Doors
To provide a safer environment for small children riding in the rear seats, the rear doors are equipped with Child- Protection Door Lock system.
To Engage Or Disengage The Child-Protection Door Lock System
1. Open the rear door.
2. Insert the tip of the ignition key into the lock and rotate to the lock or unlock position.

Child-Protection Door Lock Location
3. Repeat steps 1 and 2 for the opposite rear door.

Child-Protection Door Lock Function
WARNING!
Avoid trapping anyone in a vehicle in a collision. Remember that the rear doors can only be opened from the outside when the Child-Protection locks are en- gaged.
NOTE: For emergency exit with the system engaged, move the lock knob up (unlocked position), roll down the window, and open the door with the outside door handle.
Download Manual