2019 Honda CR-V Owners Manual - Replacing Light Bulbs

Replacing Light Bulbs

Headlight Bulbs

When replacing, use the following bulbs.

High Beam Headlights

Push the tab to remove the coupler.

Rotate the old bulb counter-clockwise to remove.

Insert a new bulb into the headlight assembly and turn it clockwise.

Insert the coupler into the connector of the bulb.

* Not available on all models

uuReplacing Light BulbsuHeadlight Bulbs

Low Beam Headlights

Passenger side

Remove the holding clip using a flat-tip screwdriver, then remove the upper part of the window washer reserve tank.

Both side

Push the tab to remove the coupler.

Rotate the old bulb counter-clockwise to remove.

Insert a new bulb into the headlight assembly and turn it clockwise.

Insert the coupler into the connector of the bulb.

uuReplacing Light BulbsuFog Light Bulbs*

When replacing, use the following bulbs.

Remove the screw using a Phillips-head screwdriver and remove the holding clips using a flat-tip screwdriver.

Pull down the under cover.

* Not available on all models

uuReplacing Light BulbsuFog Light Bulbs*

Push the tab to remove the coupler.

Right side

Rotate the old bulb clockwise to remove.

Insert a new bulb into the fog light assembly and turn it counter-clockwise.

Insert the coupler into the connector of the bulb.

Left side

Rotate the old bulb counter-clockwise to remove.

Insert a new bulb into the fog light assembly and turn it clockwise.

Insert the coupler into the connector of the bulb.

* Not available on all models

587

uuReplacing Light BulbsuParking/Daytime Running Lights

Parking/daytime running lights are LED type. Have an authorized Honda dealer inspect and replace the light assembly.

Front turn signal lights/front side marker lights are LED type. Have an authorized Honda dealer inspect and replace the light assembly.

Side turn signal lights are LED type. Have an authorized Honda dealer inspect and replace the light assembly.

Brake/taillight, rear turn signal light and rear side marker lights are LED type. Have an authorized Honda dealer inspect and replace the light assembly.

Not available on all models

uuReplacing Light BulbsuTaillight and Back-Up Light Bulbs

When replacing, use the following bulbs.

Remove the cover by prying on the edge using a flat-tip screwdriver.

u Wrap the flat-tip screwdriver with a cloth to prevent scratches.

Turn the socket to the left and remove it. Remove the old bulb.

Insert a new bulb.

uuReplacing Light BulbsuRear License Plate Light

Rear license plate light is LED type. Have an authorized Honda dealer inspect and replace the light assembly.

High-mount brake light is LED type. Have an authorized Honda dealer inspect and replace the light assembly.