2019 Honda CR-V Owners Manual - Gauges and Displays

Gauges and Displays

Gauges include the speedometer, tachometer, fuel gauge, and related indicators. They are displayed when the ignition switch is in ON w*1.

Speedometer

Displays your driving speed in mph (U.S.) or km/h (Canada).

Tachometer

Shows the number of engine revolutions per minute.

Fuel Gauge

Displays the amount of fuel left in the fuel tank.

Temperature Gauge

Displays the temperature of the engine coolant.

*1: Models with the smart entry system have an ENGINE START/STOP button instead of an ignition switch.

uuGauges and Displays uInformation Display*

The information display shows the odometer, trip meter, engine oil life and maintenance service item codes, and other gauges.

Switching the Display

Press the (TRIP) knob to change the display.

Odometer Shows the total number of miles (U.S.) or kilometers (Canada) that your vehicle has accumulated.

Trip Meter Shows the total number of miles (U.S.) or kilometers (Canada) driven since the last reset. Meters A and B can be used to measure two separate trips.

Not available on all models

Continued

uuGauges and DisplaysuInformation Display*

Resetting a trip meter

To reset a trip meter, display it, then press and hold the knob. The trip meter is reset to 0.0.

Average Fuel Economy Shows the estimated average fuel economy of each trip meter in mpg or l/100 km. The display is updated at set intervals. When a trip meter is reset, the average fuel

economy is also reset.

Instant Fuel Economy Gauge

Shows the instant fuel economy as a bar graph in mpg or l/100km.

Engine Oil Life

Shows the remaining oil life and Maintenance MinderTM.

2 Maintenance MinderTM P. 557

  Range Shows the estimated distance you can travel on the remaining fuel. This distance is estimated from the fuel economy of your previous trips.

uuGauges and Displays uInformation Display*

Shows the outside temperature in Fahrenheit (U.S.) or Celsius (Canada).

Adjust the temperature reading up to ± 5°F or ± 3°C if the temperature reading seems incorrect.

Turn the ignition switch to ON w*1.

Press and hold the (TRIP) knob for 10 seconds or more while the outside temperature is shown on the information display.

u The information display goes into temperature adjustment mode. The display starts showing from -5°F to +5°F (U.S.) or -3°C to +3°C (Canada).

Release the knob when the right adjustment amount is shown.

u The adjustment is complete.

*1: Models with the smart entry system have an ENGINE START/STOP button instead of an ignition switch.

119

uuGauges and DisplaysuDriver Information Interface*

The driver information interface shows the odometer, trip meter, outside temperature indicator, and other gauges.

It also displays important messages such as warnings and other helpful information.

Switching the Display

Main displays

Press the (display/information) button and press or to change the display. Press ENTER to see detailed information.

120

Not available on all models

uuGauges and DisplaysuDriver Information Interface*

Trip computer

Odometer

Shows the total number of miles (U.S.) or kilometers (Canada) that your vehicle has accumulated.

Trip Meter

Shows the total number of miles (U.S.) or kilometers (Canada) driven since the last reset. Meters A and B can be used to measure two separate trips.

Continued 121

uuGauges and DisplaysuDriver Information Interface*

Resetting a trip meter

To reset a trip meter, display it, then press and hold the knob. The trip meter is reset to 0.0.

Average Fuel Economy Shows the estimated average fuel economy of each trip meter in mpg or l/100 km. The display is updated at set intervals. When a trip meter is reset, the average fuel

economy is also reset.

Range Shows the estimated distance you can travel on the remaining fuel. This distance is estimated from the fuel economy of your previous trips.

Elapsed Time

Shows the time elapsed since Trip A or Trip B was reset.

Average Speed Shows the average speed in mph (U.S.) or km/h (Canada) since Trip A or Trip B was reset.

Engine Oil Life

Shows the remaining oil life and Maintenance MinderTM.

2 Maintenance MinderTM P. 557

uuGauges and DisplaysuDriver Information Interface*

Driver Attention Monitor The Driver Attention Monitor analyzes steering inputs to determine if the vehicle is being driven in a manner consistent with drowsy or inattentive driving. If it

determines that the vehicle is being driven in such a manner, it will display the degree of the driver's attention in the Driver Information Interface.

When the (display/information) button

is pressed, bars in the Driver Information Interface light up in white to indicate the degree of the driver's attention.

2 Switching the Display P. 117

Continued 123

uuGauges and DisplaysuDriver Information Interface*

If two bars light up, the Driver Attention Level Low message will appear.

If one bar lights up, the Driver Attention Level Low. Time For A Break message will appear, a beep will sound, and the steering wheel will vibrate.

If this message appears, stop in a safe location and rest for as long as needed.

The message will disappear when the ENTER button is pressed or when the system has determined that the driver is driving normally. If the driver does not take a break and the monitor continues to detect that the driver is very tired, the message will appear again after approximately 15 minutes, accompanied by a beep and steering wheel vibrations.

The message does not appear when the traveling time is 30 minutes or less.

the engine is turned off.

the driver unfastens the seat belt and opens the door while the vehicle is stopped.

uuGauges and DisplaysuDriver Information Interface*

For the Driver Attention Monitor to function

the vehicle must be traveling above 25 mph (40 km/h).

the electric power steering (EPS) system indicator must be off.

Depending on driving conditions or other factors, the Driver Attention Monitor may not function in the following circumstances.

the steering assist function of the Lane Keeping Assist System (LKAS)* is active.

2 Lane Keeping Assist System (LKAS) * P. 499

the condition of the road is poor, e.g. the surface is unpaved or bumpy.

it is windy.

the driver is frequently operating the vehicle in an assertive manner such as changing lanes or accelerating.

Customizing

You can change the Driver Attention Monitor settings. Select Tactile And Audible Alert, Tactile Alert, or OFF.

2 Customized Features P. 349

Not available on all models

Continued 125

uuGauges and DisplaysuDriver Information Interface*

Outside Temperature

Shows the outside temperature in Fahrenheit (U.S.) or Celsius (Canada).

Adjusting the outside temperature display

Adjust the temperature reading up to ±5°F or ±3°C if the temperature reading seems incorrect.

Use the customized features in the audio/information screen to correct the temperature.

2 Customized Features P. 349

Instant Fuel Economy

Shows the instant fuel economy as a bar graph in mpg or l/100 km.

The indicators on the display show the amount of torque being transferred to the right front, left front, right rear, and left rear wheels.

2 Real Time AWD with Intelligent Control SystemTM* P. 515

Not available on all models

uuGauges and DisplaysuDriver Information Interface*

Shows you turn-by-turn driving directions to your destination linked with the navigation system.

2 Refer to the Navigation System Manual

Audio

Show the current audio information.

2 Audio System Basic Operation P. 258

Phone

Show the current phone information.

2 Bluetooth® HandsFreeLink® P. 385

Not available on all models