Jump Starting
Jump Starting Procedure Turn off the power to electric devices, such as the audio and lights. Turn off the engine, then open the hood.
Open the terminal cover on your vehicle’s battery positive + terminal.
Connect the first jumper cable to your vehicle's battery + terminal.
Connect the other end of the first jumper cable to the booster battery + terminal. u Use a 12-volt booster battery only.
u When using an automotive battery charger to boost your 12-volt battery, select a lower charging voltage than 15 volts. Check the charger manual for the proper setting.
Connect the second jumper cable to the booster battery - terminal.
Continued
uuJump Startingu
Connect the other end of the second jumper cable to the engine hanger (as shown). Do not connect this jumper cable to any other part.
If your vehicle is connected to another vehicle, start the assisting vehicle's engine and increase its rpm slightly.
Attempt to start your vehicle's engine. If it turns over slowly, check that the jumper cables have good metal-to-metal contact.
628
uuJump Startingu
What to Do After the Engine Starts Once your vehicle's engine has started, remove the jumper cables in the following order:
Disconnect the jumper cable from your vehicle's ground.
Disconnect the other end of the jumper cable from the booster battery -
terminal.
Disconnect the jumper cable from your vehicle's battery + terminal.
Disconnect the other end of the jumper cable from the booster battery +
terminal.
Have your vehicle inspected by a nearby service station or a dealer.
*1: Models with the smart entry system have an ENGINE START/STOP button instead of an ignition switch.
Not available on all models
Download Manual