2019 Ford Ranger Owners Manual - Windows and Mirrors

Windows and Mirrors

Note: If you operate the switches often during a short period of time the system might become inoperable for a certain time to prevent damage due to overheating.

Note: If you operate both the switch on the relevant door and the switch for that window on the driver’s door at the same time, the window stops moving.

Note: You may hear a pulsing noise when you open just one of the windows. Lower the opposite window slightly to reduce this noise.

E131466

A B

Press the switch to open the window.

Lift the switch to close the window.

77

Front and Rear Passenger Door Switches

Press the switch to open the window.

Lift the switch to close the window.

E131469

A B

Press the switch to open the window.

Lift the switch to close the window.

Press or lift the switch to the second action point and release it.

Press again or lift it to stop the window.

Press or lift the switch to the second action point and release it.

Press again or lift it to stop the window.

Note: Once you press the safety switch, you can still operate the rear windows and front passenger window from the driver door if you have global opening and closing.

78

Note: In vehicles without global opening and closing, you cannot operate the rear windows from driver side when you press the safety switch. In certain vehicles, you cannot operate front passenger windows as well.

Press the control to lock or unlock the rear window controls.

Note: The bounce back feature remains turned off until you reset the memory.

In the event of a flat battery or after the battery is disconnected from the vehicle, you must reset the memory for the driver window.

Open the window and then try to close it using the one-touch feature.

Lift and hold the switch to the second action point until you fully close the window.

Lift and hold the switch for more than two seconds and release.

Open the window using the first action point and try to close it automatically using the second action point.

If the window does not open or close automatically when you press the switch or lift it to the second action point, repeat the procedure.

Note: The anti-trap function is not active during this procedure.

If the system detects a malfunction, it enters a safety mode. The windows move a little at a time and then stop again. Close the windows by pressing the switch again when the windows stop moving.

Contact an authorized dealer.

The window automatically stops and reverses some distance if it detects an obstacle when closing.

Note: The bounce-back feature remains turned off until you reset the memory.

If you disconnect the battery, you must reset the bounce-back memory separately for each window.

Lift and hold the switch until you fully close the window.

Release the switch.

Lift the switch again for one second.

Press and hold the switch until you fully close the window.

Release the switch.

Lift and hold the switch until you fully close the window.

Open the window and then try to close it automatically.

Reset and repeat the procedure if the window does not close automatically.

79

A Left-hand side. B Off.

C Right-hand side.

Press the arrows to adjust the mirror.

Push the mirror toward the door window glass.

Make sure that you fully engage the mirror in its support when returning it to its original position.

The power folding mirrors operate with the ignition on.

Note: The mirrors no longer operate if you switch the ignition off.

80

Press the button to fold the mirrors inward.

Release the button to stop and reverse the direction of movement, or to fold the mirrors outward.

If your power-folding mirrors are manually folded, they may not work properly even after you re-position them. You need to reset them if:

The mirrors vibrate when you drive.

The mirrors feel loose.

The mirrors do not stay in the folded or unfolded position.

One of the mirrors is not in its normal driving position.

To reset the power-fold feature:

Push the mirrors fully forward.

Press the mirror folding switch and guide the mirror to detent point, you will hear a click at this point.

Let the mirror fold toward your vehicle on its own.

Verify by pressing the mirror folding switch to fold mirrors inward and back out 2 or 3 times.

Note: You may hear a loud noise as you reset the power-folding mirrors. This sound is normal. Repeat this process as needed each time the mirrors are manually folded.

The heated exterior mirrors will remove ice, mist and fog. See Heated Exterior Mirrors (page 116).

The outer portion of the appropriate mirror housing blinks when you switch on the direction indicator.

Puddle Lamps (If Equipped)

The lamps on the bottom part of the mirror housing light when you use your transmitter to unlock the doors or when you open a door.

Pull the tab below the mirror toward you to reduce the effect of bright light from behind.

81

The mirror dims to reduce the effect of bright light from behind. It returns to normal when the bright light from behind is no longer present or if you shift into reverse (R).

Do not block the sensors on the front and back of the mirror.

Note: A rear center passenger or raised rear center head restraint could prevent light from reaching the sensor.

Rotate the sun visor toward the side window and extend it rearward for extra shade.

E162197

Lift the cover to switch the lamp on.

82