Disclaimer: Not affiliated with or endorsed by Ford Motor Company. For informational purposes only. Full Disclaimer

2019 Ford Ranger Owners Manual - Capacities and Specifications



Capacities and Specifications

Engine

2.3L EcoBoost

Cubic inches.

138

Required fuel.

Minimum 87 octane

Firing order.

1-3-4-2

Ignition system.

Coil on plug

Spark plug gap.

0.027 - 0.031 in (0.70 - 0.80 mm)

Compression ratio.

10:1

E276823

A.

B.

Short, narrow width drivebelt is on first pulley groove closest to engine.

Long, wide width drivebelt is on second pulley groove farthest from engine.

316

Component

Part Number

Air filter element.

FA-1943

Oil filter.

FL-910-S

Battery.

BAGM-48H6-610 BAGM-94RH7-800

Spark plugs.

SP-578

Cabin air filter.

FP-88

Windshield wiper blade.

WW-2615 (driver side) WW-1615 (passenger side)

We recommend Motorcraft replacement parts available at a dealer or at fordparts.com for scheduled maintenance. We engineer the parts for your vehicle to meet or exceed our specifications. Use of other parts could impact vehicle performance, emissions and durability. Your warranty could be void for any damage related to use of other parts.

If a Motorcraft oil filter is not available, use an oil filter that meets industry performance specification SAE/USCAR-36.

For spark plug replacement, contact a dealer. Replace the spark plugs at the appropriate intervals. See Scheduled Maintenance (page 437).

317

VEHICLE CERTIFICATION LABEL

    The vehicle identification number is on the left-hand side of the instrument panel.
    The vehicle identification number is also stamped beneath the front door on the chassis, on the right-hand side.

E167469

The National Highway Traffic Safety Administration Regulations require that a Safety Compliance Certification Label be affixed to a vehicle and prescribe where the Safety Compliance Certification Label may be located. The Safety Compliance Certification Label shall be affixed to either the door hinge pillar, the door latch post, or the edge of the door near the door latch, next to the driver's seating position.

318

The transmission code is on the Safety Compliance Certification Label. The following table shows the transmission code along with the transmission description.

E167814

Description

Code

Ten-speed automatic transmission 10R80

U

319

WARNING: The air conditioning refrigerant system contains refrigerant under high pressure. Only qualified personnel should service the air conditioning refrigerant system. Opening the air conditioning refrigerant system can cause personal injury.

Item

Capacity

Engine oil (with oil filter).

6.2 qt (5.9 L)

Engine coolant.

11.6 qt (11 L)

Brake fluid.

Between MIN/MAX on brake fluid reservoir

Front axle fluid.

2.11 pt (1.0 L)

Rear axle fluid (standard axle).

3.70 pt (1.75 L)

Rear axle fluid (locking axle).

3.04 pt (1.44 L)

Automatic transmission fluid.

12.8 qt (12.1 L) 1

Power Transfer Unit (PTU) fluid (four- wheel drive).

23.7 fl oz (700 ml)

Windshield washer fluid.

Fill as required

Fuel tank.

18.8 gal (71.2 L)

A/C refrigerant.

1.49 lb (0.675 kg)

A/C refrigerant compressor oil.

2.7 fl oz (80 ml)

1 Approximate dry fill capacity. Actual amount could vary during fluid changes.

320

Specifications

Name

Specification

Motor oil (U.S.):

Motorcraft® SAE 5W-30 Premium Synthetic Blend Motor Oil

XO-5W30-Q1SP

WSS-M2C946-B1

Motor oil (Canada):

Motorcraft® SAE 5W-30 Super Premium Motor Oil CXO-5W30-LSP12

WSS-M2C946-B1

Engine coolant (U.S.):

Motorcraft® Yellow Prediluted Antifreeze/Coolant VC-13DL-G

WSS-M97B57-A2

Engine coolant (Canada):

Motorcraft® Yellow Prediluted Antifreeze/Coolant CVC-13DL-G

WSS-M97B57-A2

Brake fluid:

Motorcraft® DOT 4 Low Viscosity (LV) High Performance Motor Vehicle Brake Fluid

PM-20

WSS-M6C65-A2

Rear axle fluid (U.S.)

Motorcraft® SAE 80W-90 Premium Rear Axle Lubricant XY-80W90-QL

WSP-M2C197-A

Rear axle fluid (Canada)

Motorcraft® SAE 80W-90 Premium Rear Axle Lubricant CXY-80W90-1L

WSP-M2C197-A

Automatic transmission fluid (U.S.):

Motorcraft® MERCON® ULV Automatic Transmission Fluid

XT-12-QULV

WSS-M2C949-A MERCON® ULV

Automatic transmission fluid (Canada):

Motorcraft® MERCON® ULV Automatic Transmission Fluid

XT-12-QULVC

WSS-M2C949-A MERCON® ULV

Transfer Case fluid (U.S.)

Motorcraft® MERCON® LV Automatic Transmission Fluid XT-10-QLVC

WSS-M2C938-A MERCON® LV

Transfer Case fluid (Canada)

WSS-M2C938-A

321

Name

Specification

Motorcraft® MERCON® LV Automatic Transmission Fluid CXT-10-LV12

MERCON® LV

Windshield washer fluid (U.S.):

Motorcraft® Premium Windshield Wash Concentrate with Bitterant

ZC-32-B2

WSS-M14P19-A

Windshield washer fluid (Canada):

Motorcraft® Premium Quality Windshield Washer Fluid CXC-37-(A, B, D, F)

WSS-M14P19-A

A/C refrigerant (U.S.): R-1234yf Refrigerant YN-33-A

WSS-M17B21-A

A/C refrigerant (Canada): R-1234yf Refrigerant HS7Z-19B519-BA

WSS-M17B21-A

A/C refrigerant compressor oil: Motorcraft® R-1234yf Refrigerant PAG Oil YN-35

WSS-M2C300-A2

Transmission, parking brake linkage and pivots and brake pedal shift grease:

Premium Long-Life Grease XG-1-E1

ESA-M1C75-B

Multi-purpose grease:

Motorcraft® Multi-Purpose Grease Spray XL-5-A

ESB-M1C93-B

Lock cylinders (U.S.): Penetrating and Lock Lubricant XL-1

-

Lock cylinders (Canada): Penetrating Fluid

CXC-51-A

-

If you do not use oil and fluid that meets the defined specification and viscosity grade, it could result in:

• Component damage not covered by the vehicle warranty.

• Longer engine cranking periods.

• Increased emission levels.

• Reduced engine performance.

• Reduced fuel economy.

• Reduced brake performance.

322

We recommend Motorcraft® motor oil for your vehicle. If Motorcraft® oil is not available, use motor oils of the recommended viscosity grade that meet API SN PLUS requirements and display the API Certification Mark for gasoline engines.

Do not use oil labeled with API SN PLUS service category unless the label also displays the API certification mark

E142732

E276075

An oil that displays this symbol conforms to current engine, emission system and fuel economy performance standards of ILSAC.

Do not use supplemental engine oil additives because they are unnecessary and could lead to engine damage that your vehicle warranty does not cover.

Note: We recommend using DOT 4 Low Viscosity (LV) High Performance Brake Fluid or equivalent meeting WSS-M6C65-A2. Use of any fluid other than the recommended fluid may cause reduced brake performance and not meet our performance standards. Keep brake fluid clean and dry.

Contamination with dirt, water, petroleum products or other materials could result in brake system damage and possible failure.

Note: Automatic transmissions that require MERCON® ULV transmission fluid will only use MERCON® ULV transmission fluid. The use of any other fluid could cause transmission damage.

To improve engine cold start performance, we recommend that you use the following alternative engine oil in extremely cold climates, where the ambient temperature reaches -22.0°F (-30°C) or below.

Name

Specification

Engine oil - SAE 0W-30

WSS-M2C953-B1

323

Bulb

Specification

Power (Watts)

Headlamp low beam.

H11LL

55

Headlamp high beam.

HB3LL

60

Headlamps.1

LED

LED

Front park/direction indicator bulb (Clear).

W21/5W

21/5

Front park/direction indicator bulb (Amber).

7444NA

28/8

Front side marker bulb.

194

3.78

Front fog lamp bulb.

H11

55

Front fog lamps.1

LED

LED

Rear brake/park bulb.

W21/5W

21/5

Rear direction indicator bulb.

WY21W

21

Rear direction/park/stop lamp.1

LED

LED

Reverse lamp.1

LED

LED

Reverse lamp bulb - type 1.

W21W

21

324

Bulb

Specification

Power (Watts)

Rear direction/park/stop lamp bulb.

3157K

26.9

Reverse lamp bulb - type 2.

3157K

26.9

License plate lamp.

W5W

5

Center high mounted brake lamp.

912

12.8

Center high mounted brake lamp.1

LED

LED

Cargo lamp bulb.

912

12.8

Cargo lamp.1

LED

LED

1 Optional LED lamps.

Note: LED lamps are not serviceable. See an authorized dealer if they fail.

325


Download Manual