Traction Control
The traction control system helps avoid drive wheel spin and loss of traction.
If your vehicle begins to slide, the system applies the brakes to individual wheels and, when needed, reduces engine power at the same time. If the wheels spin when accelerating on slippery or loose surfaces, the system reduces engine power in order to increase traction.
|
|
WARNING: The stability and traction control light illuminates steadily if the system detects a failure. Make sure you did not manually disable the traction control system using the switch. If the stability control and traction control light is still illuminating steadily, have the system serviced by an authorized dealer immediately. Operating your vehicle with traction control disabled could lead to an increased risk of loss of vehicle control, vehicle rollover, personal injury and death.The system automatically turns on each time you switch the ignition on.
If your vehicle is stuck in mud or snow, switching traction control off may be beneficial as this allows the wheels to spin.
Note: When you switch traction control off, stability control remains fully active.
E166706
The switch for the stability and traction control system is on the instrument panel.
When you switch the system off, a message and an illuminated icon appear on the instrument cluster.
Use the switch again to return the traction control system to normal operation.
Your vehicle may have MyKey restrictions regarding this feature. See Principle of Operation (page 63).
The stability and traction control light temporarily illuminates on engine start-up and flashes:
The stability and traction control off light temporarily illuminates on engine start-up and stays on:
227
Download Manual