Disclaimer: Not affiliated with or endorsed by Ford Motor Company. For informational purposes only. Full Disclaimer

2018 Ford F-150 Owners Manual - Information Displays



Information Displays

WARNING: Driving while distracted can result in loss of vehicle control, crash and injury. We strongly recommend that you use extreme caution when using any device that may take your focus off the road. Your primary responsibility is the safe operation of your vehicle. We recommend against the use of any hand-held device while driving and encourage the use of voice-operated systems when possible. Make sure you are aware of all applicable local laws that may affect the use of electronic devices while driving.

Various systems on your vehicle can be controlled using the information display controls on the steering wheel.

Corresponding information is displayed in the information display.

Note: Some options may appear slightly different or not at all if the items are optional.

Note: Trailer options are not available if your vehicle speed is greater than 3 mph (5 km/h).

Note: Some MyKey menu options only appear if MyKey is enabled and at least one MyKey is programmed.

This icon gives you the ability to switch a feature on or off. A check in the box indicates the

feature is switched on, and unchecked indicates the feature is switched off.

E176092

    Press the up and down arrow buttons to scroll through and highlight the options within a menu.
    Press the right arrow button to enter a sub-menu.
    Press the left arrow button to exit a menu.
    Press the OK button to choose and confirm a setting or messages.
    Trip 1 & 2
    Fuel economy
    Driver assist
    Settings

113

Note: Use the arrow buttons to choose between the following trip options.

Trip 1 & 2

Digital Speed - Press OK for km/h

Trip Odometer

Trip Timer

DTE

Average Fuel

Digital Speed - Shows a digital display of your vehicle speed.

Trip Odometer - Registers the distance of individual journeys.

Trip Timer - Registers the time of individual journeys.

DTE - Shows the approximate distance your vehicle can travel before running out of fuel.

Average Fuel - Shows the average fuel economy for a given trip.

Note: Press and hold OK to reset the currently displayed trip information.

Note: Use the arrow buttons to choose the desired fuel economy display.

Fuel Economy

Distance to E

Instant Fuel Economy

Average Fuel Economy

114

Fuel Economy

Average Speed

Auto StartStop

    Distance to E - Shows the approximate distance your vehicle can travel before running out of fuel.
    Instant Fuel Economy - Shows your instantaneous fuel usage.
    Average Fuel Economy - Shows the average fuel usage based on time. Press and hold

OK to reset this value.

    Average Speed - Shows the average speed your vehicle travels.
    Auto StartStop - Shows the current status of the Auto StartStop system.

Note: You can reset your average fuel economy by pressing and holding the OK button on the left hand steering wheel controls.

Note: Use the arrow buttons to configure different driver setting choices.

Driver Assist

Driver Assist

Prog Range Sel

DEF Gauge

Exhaust Filter

Engine Hours

Tire Pressure

Trans. Temp.

Rear Park Aid

Brake Type

Brake Effort

Trailer Sway

115

Settings

Vehicle

Auto Regen

Enter the submenu and select your setting

DTE Calculate

Lighting

Locks

Neutral Tow

Oil Life Reset

Remote Start

Wiper Controls

MyKey

MyKey Status

Enter the submenu and select your setting

Create MyKey

911 Assist

Do Not Disturb

AdvanceTrac

Max Speed

Speed Minder

Vol. Limiter

Clear MyKeys

Enter the submenu and select your setting

Display Setup

Units

Enter the submenu and select your setting

Temperature

Tire Pressure

Language

Main menu (Type 2)

Display Mode

Trip/Fuel

Towing

Off Road

Settings

116

Note: Use the arrow buttons to choose between the following display options.

Display Mode

Distance to Empty

DEF Status

Exhaust Filter Status

Tire Pressure

Digital Speedometer - Press OK for km/h

Engine Information

Transmission Temp.

    Distance to Empty - Shows the approximate distance your vehicle can travel before running out of fuel.
    DEF Status - Shows DEF status on demand screen and DEF distance to empty.
    Exhaust Filter Status - Shows exhaust filter on demand screen.
    Tire Pressure - Shows the tire pressure. See Tire Pressure Monitoring System

(page 399).

    Engine Information - Shows engine hours and engine idle hours. Hold OK to Reset
    Transmission Temp.- Shows the transmission temperature of your vehicle.

Note: Use the arrow buttons to choose between the following trip and fuel options.

Trip/Fuel

Trip 1

Enter the submenu for items such as trip timer, DTE, odometer and avg fuel economy

Trip 2

Enter the submenu for items such as trip timer, DTE, odometer and avg fuel economy

Fuel Economy

Enter the submenu and select your setting

Fuel History

Enter the submenu and select your setting

Compass

Enter the submenu and select your setting

117

Trip 1 or 2

Trip Timer - Registers the time of individual journeys.

DTE - Shows the approximate distance your vehicle can travel before running out of fuel.

Odometer - Registers the distance of individual journeys.

Avg - Shows the average fuel economy for a given trip.

Fuel Economy - Shows your instantaneous fuel usage as a bar graph and average fuel economy.

Fuel History - Shows your fuel usage based on time. The graph is updated each minute with the fuel economy that you achieved during 30 minutes of driving.

Average Speed - Shows the average speed your vehicle travels.

Auto StartStop - Shows the current status of the Auto StartStop system.

Note: Press and hold OK to reset the currently displayed information.

Note: Use the arrow buttons to configure different towing setting choices.

Note: Once you select a trailer, it remains active until you set it as no longer active. An active trailer still accumulates miles even after you physically disconnect it from your vehicle.

Towing

Trailer Status

Trailer Connection Status

BLIS with Trailer Ready/Not Available/Not Setup/Off

Pro Trailer Backup Assist: Ready or Not Setup or Not Calibrated

Active Trailer Name or Default Trailer

Accumulated Trailer Miles

Trailer Brake Gain

Output

Trailer Options

Trailer Sway Control

Select Trailer

Enter the submenu and select your setting

118

Towing

Change Trailer Settings

Enter the submenu and select your setting

Add Trailer

Enter the submenu and select your setting

Connection Checklist

Conventional

Fifth Wheel

Gooseneck

Note: Use the arrow buttons to configure different off road choices.

Off Road

Off Road Status

Pitch, Steering Angle, Roll, Elocker and 4X4

Power Distribution

Settings

Auto Regen

Blind Spot

Cross Traffic Alert

DTE Calcula- tion

Enter the submenu and select your setting

Rear Park Aid

Trailer Blind Spot

Advanced Settings

Vehicle

Easy Entry/Exit

Lighting

Locks

Remote Start

Wiper Controls

119

Settings

MyKey

Enter the submenu and select your setting

Display Setup

Units

Temperature

Tire Pressure

Language

Information Display Controls (Type 3) (If Equipped)

Press the left arrow button to exit a menu.

Press the OK button to choose and confirm a setting or messages.

You can access the menus using the information display control.

My View

Trip/Fuel

Truck Info

Towing

Off Road

Settings

E176093

Press the up and down arrow buttons to scroll through and highlight the options within a menu.

Press the right arrow button to enter a sub-menu.

Use the arrow buttons to choose between the following My View options.

120

MyView

Trip 1

Fuel Economy

Tire Pressure

Off Road Status

Configure MyView

Add/Remove Screens

Enter the submenu for Trip/ Fuel, Truck Info, Towing and Off Road selections

Reorder Screens

Enter the submenu and select your setting

Use the arrow buttons to choose between the following trip and fuel options.

Trip/Fuel

Trip 1

Enter the submenu for items such as trip timer, DTE, odometer and avg fuel economy

Trip 2

Enter the submenu for items such as trip timer, DTE, odometer and avg fuel economy

Fuel Economy

Enter the submenu and select your setting

Fuel History

Enter the submenu and select your setting

Average Speed

Enter the submenu and select your setting

121

Trip 1 or 2

Trip Timer - Registers the time of individual journeys.

DTE - Shows the approximate distance your vehicle can travel before running out of fuel.

Odometer - Registers the distance of individual journeys.

Avg - Shows the average fuel economy for a given trip.

Fuel Economy - Shows your instantaneous fuel usage as a bar graph and average fuel economy.

Fuel History - Shows your fuel usage based on time. The graph is updated each minute with the fuel economy that you achieved during 30 minutes of driving.

Average Speed - Shows the average speed your vehicle travels.

Navigation/Compass - Shows navigation turn by turn or compass direction when a route is not set.

Auto StartStop - Shows the current status of the Auto StartStop system.

Note: Press and hold OK to reset the currently displayed information.

In this mode, off-road information depicted with graphics are available.

Note: Use the arrow buttons to choose between the following display options.

Truck Info

Gauge View

Tire Pressure

Digital Speedometer

Diesel Exhaust Fluid Status

Diesel Exhaust Filter Status

122

Truck Info

Engine Information

Transmission Temperature

    Gauge View - Shows the turbo boost or transmission temp value.
    Tire Pressure - Shows the tire pressure. See Tire Pressure Monitoring System

(page 399).

    Digital Speedometer - Shows a digital display of your vehicle speed.
    Diesel Exhaust Fluid Status - Shows diesel exhaust fluid status on demand screen and DEF distance to empty.
    Diesel Exhaust Filter Status - Shows exhaust filter on demand screen.
    Engine Information - Shows engine information.
    Transmission Temperature - Shows the transmission temperature of your vehicle.

Use the arrow buttons to choose between the following towing options.

Note: Once you select a trailer, it remains active until you set it as no longer active. An active trailer still accumulates miles even after you physically disconnect it from your vehicle.

Towing

Towing Status

Enter the submenu for items such as % Grade, steering angle, gain and output display

Towing Informa- tion

Enter the submenu for items such as Trailer Name, Accumulated Miles, Pro Trailer Backup Assist Status and Trailer BLIS Status - Press OK for Trailer Options

Trailer Light Status

Enter the submenu for items such as Running, Brake and Turn Signal Light Status or No Trailer Detected

Trailer Setup

Trailer Sway Control

Select trailer

Enter the submenu and select your setting

Change Trailer Settings

Enter the submenu and select your setting

Add Trailer

Enter the submenu and select your setting

123

Towing

Connec- tion Check- list

Conventional

Fifth Wheel

Gooseneck

Use the arrow buttons to choose between the following off road options.

Off Road

Off Road Status

Pitch, Steering Angle, Roll, Elocker and 4X4

Power Distribution

Use the arrow buttons to configure different driver setting choices.

Settings

Auto Regen

Cross Traffic Alert

Driver Alert

Rear Park Aid

Trailer Blind Spot

Pre-Collision

Enter the submenu for items such as alert sensitivity, distance indication and active braking

Cruise Control

Enter the submenu and select your setting

DTE Calcula- tion

Enter the submenu and select your setting

124

Settings

Gauge Selec- tion

Enter the submenu and select your setting

Lane Keeping System

Enter the submenu for items such as system modes and alert intensity

Advanced Settings

Vehicle

Auto Engine Off

Easy Entry/Exit

Lighting

Locks

Alarm

Power Running Boards

Remote Start

Wiper Controls

MyKey

Enter the submenu and select your setting

Display Setup

Units

Temperature

Tire Pressure

Language

Note: Depending on your vehicle options and instrument cluster type, not all of the messages will display or be available. The information display may abbreviate or shorten certain messages.

E184451

125

Press the OK button to acknowledge and remove some messages from the information display. The information display will automatically remove other

messages after a short time.

You need to confirm certain messages before you can access the menus.

Message

Action

Active Park Fault

The system requires service due to a malfunction. Have the system checked by an authorized dealer.

Message

Action

Adaptive Cruise Malfunction

A radar malfunction is preventing the adaptive cruise control from engaging. See Using Adaptive Cruise Control (page 245).

Adaptive Cruise Not Available

A condition exists such that the adaptive cruise cannot func- tion properly. See Using Adaptive Cruise Control (page 245).

Adaptive Cruise Not Available Sensor Blocked See Manual

You have a blocked sensor due to bad weather, ice, mud or water in front of the radar sensor. You can typically clean the sensor to resolve. See Using Adaptive Cruise Control (page 245).

Normal Cruise Active Automatic Braking Turned Off

The system has disabled the automatic braking.

Front Sensor Not Aligned

A radar malfunction is preventing the adaptive cruise control from engaging.

Adaptive Cruise - Driver Resume Control

The adaptive cruise has reinstated controls to the driver.

Adaptive Cruise Speed Too Low to Activate

Your vehicle speed is too slow to activate the adaptive cruise.

Adaptive Cruise Shift Down

The adaptive cruise is automatically adjusting the gap distance and you need to shift the transmission into a lower gear.

126

Message

Action

Service AdvanceTrac

The system detects a condition that requires service. Contact an authorized dealer as soon as possible.

AdvanceTrac Off

The status of the AdvanceTrac system after you switched it off.

AdvanceTrac On

The status of the AdvanceTrac system after you switched it on.

AdvanceTrac SPORT MODE

The status of the AdvanceTrac sport mode after you switched it on.

Traction Control Off

The status of the traction control system after you switched it off. See Using Traction Control (page 227).

Traction Control On

The status of the traction control system after you switched it on. See Using Traction Control (page 227).

Airbag

Message

Action

Occupant Sensor

Displays when the system detects a malfunction due to a

BLOCKED Remove Objects Near Passenger

blocked sensor.

Seat

Alarm and Security

Message

Action

Vehicle Alarm To Stop Alarm, Start Vehicle.

Alarm triggered due to unauthorized entry. See Anti-Theft Alarm (page 81).

127

Message

Action

Check Charging System

The charging system needs servicing. If the warning stays on or continues to come on, contact an authorized dealer as soon as possible.

Low Battery Features Temporarily Turned Off

The battery management system detects an extended low- voltage condition. Your vehicle will disable various features to help preserve the battery. Turn off as many of the electrical loads as soon as possible to improve system voltage. If the system voltage has recovered, the disabled features will operate again as normal.

Turn Power Off To Save Battery

The battery management system determines that the battery is at a low state of charge. Turn your ignition off as soon as possible to protect the battery. This message will clear once you restart your vehicle and the battery state of charge has recovered. Turning off unnecessary electrical loads will allow faster battery state-of-charge recovery.

Charging System Service Soon

The charging system needs servicing. If the warning stays on or continues to come on, contact an authorized dealer as soon as possible.

Charging System Service Now

The charging system needs servicing. Contact an authorized dealer as soon as possible.

Battery State of Charge Low

The battery management system determines that the battery is at a low state of charge. Turn your ignition off as soon as possible to protect the battery. This message clears once you restart your vehicle and the battery state of charge has recovered.

Blind Spot Information and Cross Traffic Alert System

Message

Action

Blindspot System Fault

A fault with the system has occurred. Contact an authorized dealer as soon as possible.

Blindspot Not Available Sensor Blocked See Manual

The system sensors are blocked. See Blind Spot Informa- tion System (page 257).

Cross Traffic Vehicle Coming From X

The system detects a vehicle. See Blind Spot Information System (page 257).

128

Message

Action

Cross Traffic Not Avail- able Sensor Blocked See Manual

The blind spot information system and cross traffic alert system sensors are blocked. See Blind Spot Information System (page 257).

Cross Traffic System Fault

A fault with the system has occurred. Contact an authorized dealer as soon as possible.

Cross Traffic Alert Deac- tivated Trailer Attached

The system automatically turns off and displays this message when you connect a trailer to the vehicle that does not have a trailer blind spot system or when you switch the trailer blind spot system off through the information display. See Blind Spot Information System (page 257).

Blind Spot Alert Deactiv- ated Trailer Attached

The system automatically turns off and displays this message when you connect a trailer to the vehicle that does not have a trailer blind spot system or when you switch the trailer blind spot system off through the information display. See Blind Spot Information System (page 257).

Trailer Blind Spot Not available Due to Invalid Trailer

Displays when the trailer connected is a fifth wheel or goose- neck, or when the trailer width is wider than 10 ft (2.7 m) or longer than 33 ft (10 m).

WARNING: When the Exhaust Filter Cleaning message appears in the information display, do not park near flammable materials, vapors or structures until filter cleaning is complete.

129

Message

Action

Exhaust Filter Cleaning

Your vehicle has entered the cleaning mode. Various engine actions will raise the exhaust temperature in the Diesel Particulate Filter system to burn off the particles (exhaust soot). After the vehicle burns the particles off, the exhaust temperature will return to normal levels. This message is NORMAL.

Exhaust Filter Over- loaded Drive to Clean

The diesel particulate filter is full of particles (exhaust soot) and you are not operating the vehicle in a manner that allows normal cleaning. Drive the vehicle above 30 mph (48 km/h) until the Exhaust Filter Cleaning message turns off.

Exhaust Filter Over- loaded Clean Now

Exhaust Filter at Limit Clean Now

The diesel particulate filter is full of particles (exhaust soot) and you are not operating the vehicle in a manner that allows normal cleaning. Drive the vehicle above 30 mph (48 km/h) until the Exhaust Filter Cleaning message turns off.

Exhaust Filter at Limit Drive to Clean Now

Exhaust System Over- heated Stop Safely NOW

Your vehicle exhaust system temperature exceeded the intended operating range. If this warning occurs, a tone sounds, followed by reduced engine power. The engine shuts down when your vehicle speed is below 3 mph (5 km/h) . Stop the vehicle as soon as safely possible. Have the system checked by an authorized dealer.

Engine Warming Please Wait {seconds:00} sec

In extremely cold weather, typically below -14.8°F (-26°C) and if the engine block heater is not utilized, your engine will not respond to accelerator pedal movement for 30 seconds. This restriction allows your engine to circulate the oil properly in order to avoid engine damage.

Exhaust Filter Drive Complete

Your diesel particulate filter is clean.

Exhaust Filter Cleaned

Your diesel particulate filter is clean (OCR Only).

Exhaust Filter Cleaning Stopped

The manual regeneration process has stopped (OCR Only).

DEF Level Range: XX mi/ km Refill Now

The distance you can travel before depleting the remaining diesel exhaust fluid.

DEF Level Empty Speed Limited to XX MPH / km/ h in XX mi/km

Your diesel exhaust fluid is nearing empty. Your vehicle’s top speed will become limited in the displayed distance. You must replenish the diesel exhaust fluid to resume normal operation of your vehicle.

130

Message

Action

DEF Level Empty Speed Limited to XX MPH/km/ h Upon Restart

Your remaining diesel exhaust fluid has depleted. Your speed will be limited upon restart. You must replenish the diesel exhaust fluid to resume normal operation of your vehicle.

DEF Level Low Speed Limited to XX MPH/km/ h

The diesel exhaust fluid is empty. You must replenish the diesel exhaust fluid to resume normal operation of your vehicle.

DEF Level Empty Engine Idled Soon

The selective catalytic reduction system detects low exhaust fluid. The engine will eventually enter into an idle only mode. You must replenish the diesel exhaust fluid to resume normal operation of your vehicle.

DEF Level Empty Engine Idled See Manual

A problem exists with the selective catalytic reduction system. The vehicle will enter into an idle-only mode. If the exhaust fluid is empty, you must replenish the diesel exhaust fluid to resume normal operation of your vehicle.

DEF Fault Speed Limited to XX MPH/km/h in XX mi/km

The selective catalytic reduction system detects a fault. The vehicle’s top speed will become limited in the displayed distance and count down from this point. Have the system checked by an authorized dealer.

DEF Fault Speed Limited to XX MPH/km/h Upon Restart

The selective catalytic reduction system detects a fault. The vehicle’s top speed will become limited upon restarting. Have the system checked by an authorized dealer.

DEF Fault Speed Limited to XX MPH/km/h

The selective catalytic reduction system detects a fault. The vehicle’s top speed is limited. Have the system checked by an authorized dealer.

DEF Fault Engine Idled Soon

The selective catalytic reduction system detects a fault. The engine will eventually enter into an idle only mode. Have the system checked by an authorized dealer.

Exhaust Filter Over Limit Service Now

You must have your vehicle serviced by an authorized dealer. Ignoring the Exhaust Filter Over Limit Service Now warning message could lead to reduced drivability and customer expense, including damage to the diesel particulate filter.

Your new vehicle warranty may not cover this damage.

Water in Fuel Drain Filter

The water separator has reached a predetermined capacity and needs draining. See Draining the Fuel Filter Water Trap (page 360).

Fuel Pressure Low

A low fuel pressure condition has occurred due to cold, low fuel level or fuel filters need to be changed. See Fuel Quality (page 184).

131

Message

Action

X Door Ajar

The door(s) listed is not completely closed.

Tailgate Ajar

The tailgate is not completed closed.

Driver Alert

Message

Action

Driver Alert Warning Rest Now

Stop and rest as soon as it is safe to do so.

Driver Alert Warning Rest Suggested

Take a rest soon.

Drivetrain

Message

Action

To Engage Locking Differential Slow to XX mph/km/h

The electronic locking differential requests a certain speed requirement to engage.

To Engage Locking Differential Release Accelerator Pedal

The electronic locking differential requests the accelerator to be released in order to engage.

Check Locking Differen- tial

An electronic locking differential (ELD) system fault is present. Contact an authorized dealer as soon as possible.

Neutral Tow Enabled Leave Transmission in Neutral

The transfer case is in the neutral position. This message indicates that your vehicle is safe to be towed with all four wheels on the ground.

Neutral Tow Disabled

The transfer case is NOT in the neutral position. This message indicates that your vehicle is NOT safe to be towed with all four wheels on the ground.

132

Message

Action

Power Reduced to Lower Engine Temp

The engine has reduced power to help reduce high engine temperature.

Fuel

Message

Action

Fuel Level Low

An early reminder of a low fuel condition.

Check Fuel Fill Inlet

The fuel fill inlet may not be properly closed.

Keys and Intelligent Access

Message

Action

To START Press Brake

A reminder to press the brake while starting the vehicle.

No Key Detected

The system does not detect a key in your vehicle. See Keyless Starting (page 171).

Restart Now or Key is Needed

You pressed the StartStop button to switch off the engine and your vehicle does not detect your intelligent access key inside your vehicle.

Run Power Active

Your vehicle is in the run ignition state.

Starting System Fault

There is a problem with your vehicle’s starting system. See an authorized dealer for service.

Key Program Successful

You have successfully programmed an intelligent access key to the system.

Key Program Failure

You have failed to program an intelligent access key to the system.

Max Number of Keys Learned

You have programmed the maximum number of keys to the system.

133

Message

Action

Not Enough Keys Learned

You have not programmed enough keys to the system.

Key Battery Low Replace Soon

The key battery is low. Change the battery as soon as possible.

Engine ON

Informs you that you are exiting your vehicle and the engine is on.

Message

Action

Lane Keeping Sys. Malfunction Service Required

The system has malfunctioned. Contact an authorized dealer as soon as possible.

Front Camera Tempor- arily Not Available

The system has detected a condition that has caused the system to be temporarily unavailable.

Front Camera Low Visib- ility Clean Screen

The system has detected a condition that requires you to clean the windshield in order for it to operate properly.

Front Camera Malfunc- tion Service Required

The system has malfunctioned. Contact an authorized dealer as soon as possible.

Keep Hands on Steering Wheel

The system requests you to keep your hands on the steering wheel.

Maintenance

Message

Action

Low Engine Oil Pressure

Stop your vehicle as soon as safely possible and turn off the engine. Check the oil level. If the warning stays on or continues to come on with your engine running, contact an authorized dealer as soon as possible.

Change Engine Oil Soon

The engine oil life remaining is 10% or less.

Oil Change Required

The oil life left is at 0%.

Brake Fluid Level Low

The brake fluid level is low, inspected the brake system immediately. See Brake Fluid Check (page 359).

134

Message

Action

Check Brake System

The brake system needs servicing. Stop your vehicle in a safe place. Contact an authorized dealer.

Transport / Factory Mode Contact Dealer

Your vehicle is still in Transport or Factory mode. This may not allow some features to operate properly. See an author- ized dealer.

See Manual

The powertrain needs service due to a powertrain malfunction.

Message

Action

MyKey not Created

You cannot program a MyKey.

MyKey Active Drive Safely

MyKey is active.

Speed Limited to XX MPH/km/h

When switching on your vehicle and MyKey is in use, displays that the MyKey speed limit is on.

Near Vehicle Top Speed

MyKey is in use and the MyKey speed limit is on and the vehicle speed is approaching 81 mph (130 km/h).

Vehicle at Top Speed of MyKey Setting

You have reached the speed limit set for your MyKey.

Check Speed Drive Safely

You have an active MyKey with a programmed set speed limit.

Buckle Up to Unmute Audio

Belt-Minder turns on with a MyKey in use.

AdvanceTrac On - MyKey Setting

With a MyKey in use, AdvanceTrac turns on.

Traction Control On - MyKey Setting

With a MyKey in use, traction control turns on.

MyKey Park Aid Cannot be Deactivated

With a MyKey in use, park aid is always on.

Lane Keeping Alert On MyKey Setting

With a MyKey in use, lane keeping alert turns on.

135

Message

Action

Hill Descent Control Active

Hill descent control mode is active.

Hill Descent Control OFF

Hill descent control mode is inactive.

For Hill Descent Reduce Speed XX MPH/km/h or Less

Your vehicle speed requirement for off-road mode entry has not been met.

For Hill Descent Select Gear

You need to select a transmission gear for hill descent mode.

Hill Descent Driver Resume Control

Hill descent control mode is deactivated and you must resume control.

Hill Descent Control Fault

A hill descent system fault is present.

Hill Descent Control Off System Cooling

The hill descent system is cooling due to overuse.

Hill Descent Control Ready

The hill descent control system is ready.

Park Aid

Message

Action

Check Front Park Aid

The system has detected a condition that requires service. Contact an authorized dealer. See Principle of Operation (page 233).

Check Rear Park Aid

The system has detected a condition that requires service. Contact an authorized dealer. See Principle of Operation (page 233).

Front Park Aid On Off

Displays the park aid status.

Rear Park Aid On Off

Displays the park aid status.

136

Message

Action

To Release: Press Brake and Switch

The electric parking brake is set and a manual release is attempted without the brake pedal being pressed.

Park Brake Use Switch to Release

The electric park brake is set and an automatic release is attempted but cannot be performed. Perform a manual release.

Release Park Brake

The electric park brake is set and your vehicle speed exceeds 3 mph (5 km/h). Release park brake before continued driving.

Park Brake Not Applied

The electric park brake is not fully applied.

Park Brake Not Released

The electric park brake is not fully released.

Park Brake Maintenance Mode

The electric park brake system has been put into a special mode that is used to allow service of the rear brakes. Contact an authorized dealer.

Park Brake Limited Function Service Required

The electric park brake system has detected a condition that requires service. Some functionality may still be available.

Contact an authorized dealer.

Park Brake Malfunction Service Now

The electric park brake system has detected a condition that requires service. Contact an authorized dealer.

Power Steering

Message

Action

Steering Fault Service Now

The power steering system has detected a condition that requires service. See an authorized dealer.

Steering Loss Stop Safely

The power steering system is not working. Stop your vehicle in a safe place. Contact an authorized dealer.

Steering Assist Fault Service Required

The power steering system has detected a condition within the power steering system or passive entry or passive start system requires service. Contact an authorized dealer.

Steering Lock Malfunc- tion Service Now

The steering lock system has detected a condition that requires service. See an authorized dealer.

137

Message

Action

Pre-Collision Assist Not Available Sensor Blocked

You have a blocked sensor due to bad weather, ice, mud or water in front of the radar sensor. You can typically clean the sensor to resolve.

Pre-Collision Assist Not Available

A fault with the system has occurred. Contact an authorized dealer as soon as possible.

Pro Trailer Backup Assist

Message

Action

Pro Trailer Backup Assist™ Not Active Stop Vehicle to Activate

Pro Trailer Backup Assist can only be activated when the vehicle is stopped.

Pro Trailer Backup Assist™ Locating Sticker Please wait...

Press Knob to Exit

Camera System is locating the sticker. Wait until the sticker is found before attempting to use Pro Trailer Backup Assist.

Pro Trailer Backup Assist™ Stop now Maximum trailer angle Press Knob to Exit

Stop Now. Pro Trailer Backup Assist has reached max trailer angle.

Pro Trailer Backup Assist™ Stop Now Take Control of Steering Wheel

Stop Now. Pro Trailer Backup Assist is no longer controlling steering.

Pro Trailer Backup Assist™ Reduce Speed Turn Knob to Steer Press Knob to Exit

Slow vehicle speed. Vehicle is approaching the exit speed for the Pro Trailer Backup Assist feature.

Pro Trailer Backup Assist™ System is Not Available

Conditions for Pro Trailer Backup Assist operation are not met. See Trailer Reversing Aids (page 282).

Pro Trailer Backup Assist™ Remove Hands from Steering Wheel to Activate Press Knob to Exit

Pro Trailer Backup Assist cannot operate with hands on wheel. Remove hands to activate.

Pro Trailer Backup Assist™ Cancelled by Driver Take Control of Steering Wheel

Pro Trailer Backup Assist knob has been pushed to deactivate the system.

Pro Trailer Backup Assist™ Shift to Reverse to Activate. Press Knob to Exit

Pro Trailer Backup Assist operation is only available in reverse gear. Shift gear selector into reverse to activate.

138

Message

Action

Pro Trailer Backup Assist™ Sticker Not Found Shift to Park Press Knob to Exit

Camera system cannot locate sticker. Shift to park.

Pro Trailer Backup Assist™ Sticker Not Found Refer to Owner's Manual. Press Knob to Exit

Camera system cannot locate sticker. See Trailer Reversing Aids (page 282).

Pro Trailer Backup Assist™ Drive Straight Forward to Calib- rate. Press Knob to Exit

Drive between 4–24 mph (6–39 km/h) straight forward to calibrate Pro Trailer Backup Assist.

Pro Trailer Backup Assist™ Calibration Complete Stop Vehicle

The system has completed calibration. Stop the vehicle to use Pro Trailer Backup Assist feature.

Message

Action

To Drive: Press Start Button

A reminder to push the start button to drive your vehicle after a remote start.

Seats

Message

Action

Memory Recall Not Permitted While Driving

A reminder that memory seats are not available while driving.

Memory {0} Saved

Shows where you have saved your memory setting.

Side-Wind

Message

Action

Side-Wind Stabilization Active

This message displays when the side-wind system turns on in response to strong wind conditions. See Principle of Operation (page 228).

139

Message

Action

To START Press Brake

A reminder to apply the brake when starting your vehicle .

Cranking Time Exceeded

The starter has exceeded its cranking time in attempting to start your vehicle.

Engine Start Pending Please Wait

The starter is attempting to start your vehicle.

Pending Start Cancelled

The system has cancelled the pending start.

Tire Pressure Monitoring System

Message

Action

Tire Pressure Low

One or more tires on your vehicle has low tire pressure. See

Tire Pressure Monitoring System (page 399).

Tire Pressure Monitor Fault

The tire pressure monitoring system is malfunctioning. If the warning stays on or continues to come on, contact an authorized dealer. See Tire Pressure Monitoring System (page 399).

Tire Pressure Sensor Fault

A tire pressure sensor is malfunctioning or your spare tire is in use. See Tire Pressure Monitoring System (page 399). If the warning stays on or continues to come on, contact an authorized dealer as soon as possible.

Trailer

Message

Action

Trailer Brake Gain: {trailer gain value:#0.0}

The current gain setting for the trailer brake.

Trailer Brake Gain: {trailer gain value:#0.0} No Trailer

The current gain setting for the trailer brake when a trailer is not connected.

Trailer Brake Module Fault

Faults sensed in the Integrated Trailer Brake Control Module followed by a single chime. See Towing a Trailer (page 280).

Trailer Connected

A correct trailer connection is sensed during a given ignition cycle.

140

Message

Action

Trailer Disconnected

A trailer connection becomes disconnected, either intentionally or unintentionally, and has been sensed during a given ignition cycle.

Trailer Sway Reduce Speed

The trailer sway control has detected trailer sway.

Trailer Wiring Fault

There are certain faults in your vehicle wiring and trailer wiring/brake system. See Towing a Trailer (page 280).

Trailer Left Turn Lamps Fault Check Lamps

There is a fault with your trailer turn lamp. Check your lamp.

Trailer Right Turn Lamps Fault Check Lamps

There is a fault with your trailer turn lamp. Check your lamp.

Trailer Battery Not Charging See Manual

There is a fault with your trailer battery. See Towing a Trailer (page 280).

Trailer Lighting Module Fault See Manual

There is a fault with your vehicle trailer lighting module.

See Towing a Trailer (page 280).

Message

Action

Check 4x4

A 4X4 system fault is present. Contact an authorized dealer as soon as possible.

4x4 Shift in Progress

The 4X4 system is making a shift.

For 4x4 LOW Shift to N

Displays when you attempt to switch to 4X4 LOW and you do not shift the transmission to neutral (N).

For 4x4 LOW Slow to 3 MPH

Displays when you attempt to switch to 4X4 LOW and your vehicle's speed is greater than 3 mph (5 km/h).

To Exit 4x4 LOW Shift to N

Displays when you attempt to switch from 4X4 LOW and you do not shift the transmission to neutral (N).

To Exit 4x4 LOW Slow to 3 MPH

Displays when you attempt to switch from 4X4 LOW and your vehicle's speed is greater than 3 mph

(5 km/h).

Shift Delayed Pull Forward

May display when there is a Transfer case gear tooth blockage while shifting to or from 4L or to the neutral state.

141

Message

Action

4x4 Temporarily Disabled

Displays when the system turns off the clutch due to excessive stress. The system automatically turns on the clutch after it cools.

4x4 Restored

Displays when the 4X4 system restores to the 4A setting.

4X4 Temporarily Locked

Displays when the 4X4 system temporarily turns on 4H from 4A after detecting driving conditions that require greater 4X4 performance. The system automat- ically returns to 4A after the system no longer detects these driving conditions.

Shift to Neutral

Displays when the system requires an additional transmission shift to Neutral to complete a transfer case shift.

To Engage 4x4 Slow to 3 MPH

Displays when you command a 4x4 shift during conditions which are potentially harmful to the drive- line components

To Engage 4x4 Slow to 5 km/h

To Engage 4x4 Release Acceler- ator Pedal

Displays when the 4x4 system requests the you release the accelerator pedal to complete a 4x4 shift. See Using Four-Wheel Drive (page 213).

142


Download Manual