Information Displays
Driver Information Center (DIC)
The DIC is displayed in the instrument cluster. It shows the status of many vehicle systems.
y orz : Move SEL up or down to go to the previous or next selection. S or T : Press to move between the interactive display zones in the cluster. Press S to go back to the previous menu.
140 INSTRUMENTS AND CONTROLS
SEL : Press to open a menu or select a menu item. Press and hold to reset values on certain screens.
DIC Information Display Options
The info displays on the DIC can be turned on or off through the Options menu. 1. Press SEL while viewing the
Options page in one of the interactive display zones on the cluster.
2. Scroll to Info Pages and press SEL.
3. Press y or z to move through the list of possible info displays.
4. Press SEL while an item is highlighted to select or deselect that item. When an item is selected, a checkmark will appear next to it.
DIC Information Displays
The following is the list of all possible DIC information displays. Some of the information displays may not be available for your particular vehicle.
Speed (Base Cluster) : Shows the vehicle speed in either kilometers per hour (km/h) or miles per hour (mph).
Trip 1 or Trip 2 (Base Cluster) / Trip 1 or Trip 2 and Average Fuel Economy (Uplevel Cluster) : The Trip display shows the current distance traveled, in either kilometers (km) or miles (mi), since the trip odometer was last reset. The trip odometer can be reset by pressing and holding SEL while this display is active. The Average Fuel Economy display shows the approximate average liters per 100 kilometers (L/100 km) or miles per gallon (mpg). This number is calculated based on the number of L/100 km (mpg) recorded since the last time this menu item was reset. This number reflects only the approximate average fuel economy that the vehicle has right now, and will change as driving conditions change. The Average Fuel Economy can be reset along with the trip odometer by pressing and holding SEL while this display is active.
Fuel Range : Shows the approximate distance the vehicle can be driven without refueling. LOW will be displayed when the vehicle is low on fuel. The fuel range estimate is based on an average of the vehicle's fuel economy over recent driving history and the amount of fuel remaining in the fuel tank.
Average Fuel Economy (Base Cluster) : Shows the approximate average liters per 100 kilometers (L/ 100 km) or miles per gallon (mpg). This number is calculated based on the number of L/100 km (mpg) recorded since the last time this menu item was reset. This number reflects only the approximate average fuel economy that the vehicle has right now, and will change as driving conditions change. The Average Fuel Economy can be reset by pressing and holding SEL while this display is active.
Instantaneous Fuel Economy : Shows the current fuel economy in either liters per 100 kilometers (L/100 km) or miles per gallon (mpg). This number reflects only the approximate fuel
INSTRUMENTS AND CONTROLS 141 economy that the vehicle has right now and changes frequently as driving conditions change.
Average Speed : Shows the average speed of the vehicle in kilometers per hour (km/h) or miles per hour (mph). This average is calculated based on the various vehicle speeds recorded since the last reset of this value. The average speed can be reset by pressing and holding SEL while this display is active.
Timer : This display can be used as a timer. To start the timer, press SEL while this display is active. The display will show the amount of time that has passed since the timer was last reset. To stop the timer, press SEL briefly while this display is active and the timer is running. To reset the timer to zero, press and hold SEL while this display is active.
Compass (Base Cluster) : Shows the direction the vehicle is driving.
Turn Arrow : Shows the next maneuver when using route guidance.
Estimated Time to Arrival : Shows the estimated time until arrival at your destination.
Distance to Destination : Shows the distance to the destination when using route guidance.
Speed Limit : Shows the current speed limit. The information for this page comes from a roadway database.
Speed Warning : Allows the driver to set a speed that they do not want to exceed. To set the Speed Warning, press SEL when Speed Warning is displayed. Press y or z to adjust the value. This feature can be turned off by pressing and holding SEL while viewing this page. If the selected speed limit is exceeded, a pop-up warning is displayed and a chime may sound.
Best Fuel Economy : Displays average fuel economy, the best fuel economy over the selected distance, and a bar graph showing instantaneous fuel economy.
Driver Assistance (Uplevel Cluster) : Shows information for Lane Keep Assist (LKA), Lane Departure Warning (LDW), and Forward Collision Alert (FCA).
Performance Timer (V Sport Only) :
Shows the last performance time recorded. Press and hold SEL while viewing the performance timer to reset and stop the timer. Press SEL to enter the performance timer menu. In the menu, set the start speed, set the end speed, and reset the timer.
Cruise Set Speed : Shows the speed the cruise control or Adaptive Cruise Control is set to.
Follow Distance Indicator : When Adaptive Cruise Control (ACC) is not engaged, the current follow time to the vehicle ahead is displayed as a time value on this page. When ACC has been engaged, the display switches to the gap setting page. This page shows the current gap setting along with the vehicle ahead telltale.
Battery Voltage : Shows the current battery voltage.
142 INSTRUMENTS AND CONTROLS
Oil Life : Shows an estimate of the oil's remaining useful life. If REMAINING OIL LIFE 99% is displayed, that means 99% of the current oil life remains. When the remaining oil life is low, the CHANGE ENGINE OIL SOON message will appear on the display. The oil should be changed as soon as possible. See Engine Oil 0 244. In addition to the engine oil life system monitoring the oil life, additional maintenance is recommended. See Maintenance Schedule 0 322. The Oil Life display must be reset after each oil change. It will not reset itself. Do not reset the Oil Life display accidentally at any time other than when the oil has just been changed. It cannot be reset accurately until the next oil change. To reset the engine oil life system, press and hold SEL for several seconds while the Oil Life display is active. See Engine Oil Life System 0 246.
Tire Pressure : Shows the approximate pressures of all four tires. Tire pressure is displayed in either kilopascal (kPa) or in pounds per
square inch (psi). If the pressure is low, the value for that tire is shown in amber. See Tire Pressure Monitor System 0 281 and Tire Pressure Monitor Operation 0 282.
Vehicle Odometer (Base Cluster) :
Shows the odometer.
Blank Page : Allows for no information to be displayed in the cluster info display areas.
Head-Up Display (HUD)
{ Warning
If the HUD image is too bright or too high in your field of view, it may take you more time to see things you need to see when it is dark outside. Be sure to keep the HUD image dim and placed low in your field of view.
If equipped with HUD, some information concerning the operation of the vehicle is projected onto the windshield. The image is projected
through the HUD lens on top of the instrument panel. The information appears as an image focused out toward the front of the vehicle.
Caution
If you try to use the HUD image as a parking aid, you may misjudge the distance and damage your vehicle. Do not use the HUD image as a parking aid.
The HUD information can be displayed in various languages. The speedometer reading and other numerical values can be displayed in either English or metric units. The language selection is changed through the radio and the units of measurement is changed through the instrument cluster. See “Settings” in the Infotainment Manual and “Options” under Instrument Cluster 0 121.
HUD Display on the Windshield
The HUD may display some of the following vehicle information and vehicle messages or alerts: . Speed . Tachometer . Audio . Phone . Navigation . Collision Alert . Adaptive Cruise Control and set speed . Lane Departure
. Low Fuel Some vehicle messages or alerts displayed in the HUD may be cleared by using the steering wheel controls. See Vehicle Messages 0 146. Some information shown may not be available on your vehicle if it is not equipped with these features.
The HUD control is to the left of the steering wheel. To adjust the HUD image: 1. Adjust the driver seat. 2. Start the engine. 3. Use the following settings to adjust the HUD. $ : Press or lift to center the HUD image. The HUD image can only be adjusted up and down, not side to side.
! : Press to select the display view. Each press will change the display view. D : Lift and hold to brighten the display. Press and hold to dim the display. Continue to hold to turn the display off. The HUD image will automatically dim and brighten to compensate for outside lighting. The HUD brightness control can also be adjusted as needed. The HUD image can temporarily light up depending on the angle and position of sunlight on the HUD display. This is normal. Polarized sunglasses could make the HUD image harder to see.
Head-Up Display (HUD) Rotation Option
This feature allows for adjusting the angle of the HUD image. Press SEL on the steering wheel controls while Head-up Display Rotation is highlighted to enter Adjust Mode. Press y or z to adjust the
144 INSTRUMENTS AND CONTROLS angle of the HUD display. Press S or T to highlight OK, then press SEL to save the setting. CANCEL can also be selected to cancel the setting. The vehicle must be in P (Park). See Instrument Cluster 0 121.
HUD Views
There are four views in the HUD. Some vehicle information and vehicle messages or alerts may be displayed in any view.
Metric
English
Speed View : This displays digital speed in English or metric units, speed limit, vehicle ahead indicator, Lane Departure Warning/Lane Keep Assist, and Adaptive Cruise Control and set speed. Some information only appears on vehicles that have these features, and when they are active.
Metric
English
Audio/Phone View : This displays digital speed, indicators from speed view along with audio/phone information. The current radio station, media type, and incoming calls will be displayed. All HUD views may briefly display audio information when the driver uses the steering wheel controls to adjust the audio settings appearing in the instrument cluster. Incoming phone calls appearing in the instrument cluster may also display in any HUD view.
Metric
English
Navigation View : This displays digital speed, indicators from speed view along with Turn-by-Turn Navigation information in some vehicles. The compass heading is displayed when navigation routing is not active. Navigation Turn-by-Turn Alerts shown in the instrument cluster may also be displayed in any HUD view.
Metric
English
Performance View : This displays digital speed, indicators from speed view along with rpm reading, transmission positions, and gear shift indicator (if equipped).
Care of the HUD
Clean the inside of the windshield to remove any dirt or film that could reduce the sharpness or clarity of the HUD image. Clean the HUD lens with a soft cloth sprayed with glass cleaner. Wipe the lens gently, then dry it.
HUD Troubleshooting
If you cannot see the HUD image when the ignition is on, check that: . Nothing is covering the HUD lens. . The HUD brightness setting is not
too dim or too bright. . The HUD is adjusted to the proper
height. . Polarized sunglasses are not worn. . The windshield and HUD lens are
clean. If the HUD image is not correct, contact your dealer. The windshield is part of the HUD system. See Windshield Replacement 0 261.
Download Manual