2018 Honda CR-V Owners Manual - Parking Your Vehicle

Parking Your Vehicle

When Stopped

Depress the brake pedal firmly.

With the brake pedal depressed, pull up the electric parking brake switch slowly, but fully.

Move the shift lever from D to .

Turn off the engine.

u The parking brake indicator goes off in about 15 seconds.

Always confirm the electric parking brake is set, in particular if you are parked on an incline.

uuParking Your Vehicle uCross Traffic Monitor *

Monitors the rear corner areas using the radar sensors when reversing, and alerts you if a vehicle approaching from a rear corner is detected.

The system is convenient when you are backing out of a parking space.

Not available on all models

Continued

uuParking Your VehicleuCross Traffic Monitor*

How the System Works

The system activates when:

The power mode is in ON.

The Cross Traffic Monitor system is turned on.

2 Cross Traffic Monitor On and Off P. 546

The transmission is in R.

Your vehicle is moving at 3 mph (5 km/h) or lower.

When a vehicle is detected approaching from a rear corner, Cross Traffic Monitor alerts you with a buzzer and a displayed warning.

The system will not detect a vehicle that approaches from directly behind your vehicle, nor will it provide alerts about a detected vehicle when it moves directly behind your vehicle.

The system does not detect or provide alerts for a vehicle that is moving away from your vehicle, and it may not detect or alert for pedestrians, bicycles, or stationary objects.

* Not available on all models

uuParking Your Vehicle uCross Traffic Monitor *

When the System Detects a Vehicle

An arrow icon appears on the side a vehicle is approaching on the audio/information screen.

Continued 545

uuParking Your VehicleuCross Traffic Monitor*

Cross Traffic Monitor On and Off

You can switch on and off the system using the audio/information screen.

Select .

Select Settings.

Select Camera.

Select Cross Traffic Monitor.

Select On or Off, then select OK.

The system can also be turned on and off on the audio/information screen by pressing the CTM icon.