Compass*
When you turn the ignition switch to ON w, the compass self-calibrates, and the compass display appears.
If the compass indicates the wrong direction, or the CAL indicator blinks, you need to manually calibrate the system.
Not available on all models
Turn the ignition switch to ON w.
Press and hold the (day/night) button until the display shows the compass setting menu.
Rotate 
to select Calibration, then press 
.
to select Calibration, then press .When the display changes to Push CAL Start, press 
.
.Drive the vehicle slowly in two circles.
u The compass starts to show a direction after the calibration. The CAL indicator goes off.
uuCompass*uCompass Zone Selection
Turn the ignition switch to ON w.
Press and hold the (day/night) button until the display shows the compass setting menu.
Rotate 
to select Zone, then press 
. The display shows the current zone number.
to select Zone, then press . The display shows the current zone number.Rotate 
to select the zone number of your area (See Zone Map), then press 
.
to select the zone number of your area (See Zone Map), then press .|
Zone Map Guam Island: Puerto Rico: |
Zone 8 Zone 11 |
Download Manual