Locking and Unlocking the Doors
Key Types and Functions
This vehicle comes with the following keys:
Use the key to start and stop the engine, to lock and unlock the doors and to open the trunk. You can also use the remote transmitter or smart entry system* to lock and unlock the doors and to open the trunk.
The built-in key can be used to lock/unlock the doors when the smart entry remote battery becomes weak and the power door lock/ unlock operation is disabled.
136
* Not available on all models
To remove the built-in key, pull it out while sliding the release knob. To reinstall the built- in key, push the built-in key into the smart entry remote until it clicks.
uuLocking and Unlocking the DoorsuKey Types and Functions
Contains a number that you will need if you purchase a replacement key.
uuLocking and Unlocking the DoorsuLow Smart Entry Remote Signal Strength*
The vehicle transmits radio waves to locate the smart entry remote when locking/ unlocking the doors and fuel fill door, opening the trunk, or starting the engine.
In the following cases, locking/unlocking the doors, opening the trunk, or starting the engine may be inhibited or operation may be unstable:
uuLocking and Unlocking the DoorsuLocking/Unlocking the Doors from the Outside
When you carry the smart entry remote, you can lock/unlock the doors, fuel fill door, and open the trunk.
You can lock/unlock the doors and fuel fill door within a radius of about 32 inches (80 cm) of the outside door handle. You can open the trunk within about 32 inches (80 cm) radius from the trunk release button.
Press the door lock button on the front door.
u Some exterior lights flash; the beeper sounds; all the doors and trunk lock; and the security system sets.
Continued
139
uuLocking and Unlocking the DoorsuLocking/Unlocking the Doors from the Outside
When you walk away from the vehicle while carrying the smart entry remote, the doors will automatically lock.
The auto lock function activates when all doors are closed, and the smart entry remote is within about 5 feet (1.5 m) radius of the outside door handle.
Exit vehicle while carrying smart entry remote and close door(s).
u The beeper sounds; the auto lock function will be activated.
sounds; all doors will then lock.
140
uuLocking and Unlocking the DoorsuLocking/Unlocking the Doors from the Outside
To temporarily deactivate the function:
Lock Unlock Lock Unlock.
u The beeper sounds and the function is deactivated.
To restore the function:
Continued 141
uuLocking and Unlocking the DoorsuLocking/Unlocking the Doors from the Outside
Grab the driver’s door handle:
u The driver’s door and fuel fill door unlocks.
u Some exterior lights flash twice and the beeper sounds twice.
Grab the front passenger’s door handle:
u All the doors unlock.
u Some exterior lights flash twice and the beeper sounds twice.
Press the trunk release button:
u The trunk unlocks and opens.
u Some exterior lights flash and the beeper sounds.
2 Using the Trunk Release Button* P. 154
uuLocking and Unlocking the DoorsuLocking/Unlocking the Doors from the Outside
u Some exterior lights flash, all the doors and fuel fill door lock, and the security system sets.
u The beeper sounds and verifies the security system is set.
Continued 143
uuLocking and Unlocking the DoorsuLocking/Unlocking the Doors from the Outside
u Some exterior lights flash twice, and the driver’s door and fuel fill door unlock.
u The remaining doors unlock.
If the lock or unlock button of the remote does not work, use the key instead.
Fully insert the key and turn it.
uuLocking and Unlocking the DoorsuLocking/Unlocking the Doors from the Outside
If you do not have the key on you, or if for some reason you cannot lock a door using the key, you can lock the door without it.
Push the lock tab forward a or push the master door lock switch in the lock direction b, and close the door.
Push the lock tab forward and close the door.
Models without smart entry system
The doors cannot be locked when the key is in the ignition switch.
Models with smart entry system
The doors cannot be locked when the smart entry remote is inside the vehicle.
145
uuLocking and Unlocking the DoorsuLocking/Unlocking the Doors from the Inside
Push the lock tab forward.
Pull the lock tab rearward.
146
uuLocking and Unlocking the DoorsuLocking/Unlocking the Doors from the Inside
Pull the front door inner handle.
u The door unlocks and opens in one motion.
Unlocking and opening the driver’s door from the inner handle unlocks all the other doors.
To avoid all the doors to be unlocked, use the lock tab on the driver’s door to unlock, then lock again before opening the door.
u This setting works for one time only.
Models with driver information interface
If you do not want all the doors to be unlocked all the time, customize the Auto Door Unlock setting to Off using the driver information interface or audio/information screen.
2 Customized Features P. 124, 328
Models without driver information interface
If you do not want all the doors to be unlocked all the time, customize the auto door unlocking setting to off using the master door lock switch.
2 Customizing Flow for Auto Door Unlocking Options P. 152
Continued 147
uuLocking and Unlocking the DoorsuChildproof Door Locks
Press the master door lock switch in as shown to lock or unlock all doors.
The childproof door locks prevent the rear doors from being opened from the inside regardless of the position of the lock tab.
Slide the lever in the rear door to the lock position, and close the door.
Open the door using the outside door handle.
148
uuLocking and Unlocking the DoorsuAuto Door Locking/Unlocking
Your vehicle locks and unlocks all doors automatically when a certain condition is met.
All doors lock when the vehicle’s speed reaches about 10 mph (15 km/h).
All doors unlock when the driver’s door is opened.
149
uuLocking and Unlocking the DoorsuCustomizing the Auto Door Locking/Unlocking Setting
You can customize the auto door locking/unlocking setting to your liking using the master door lock switch.
Auto door unlocking
*1:Default setting
150
uuLocking and Unlocking the DoorsuCustomizing the Auto Door Locking/Unlocking Setting
|
Customizing Flow for Auto Door Locking Options
|
||
|
Steps |
Drive Lock Mode*2 |
Off |
|
1 |
Apply the parking brake. Models with continuously variable transmission Move the shift lever out of |
Apply the parking brake. Models with continuously variable transmission Move the shift lever to |
|
2 |
Close the driver’s door. |
Open the driver’s door. |
|
3 |
Turn the ignition switch to ON (w*1. |
Turn the ignition switch to ON (w*1. |
|
4 |
Press and hold the right side of the master door lock switch on the driver’s door for more than five seconds. Release the switch after you hear a click twice. |
Press and hold the right side of the master door lock switch on the driver’s door for more than five seconds. Release the switch after you hear one click. |
|
5 |
Turn the ignition switch to ACCESSORY (q*1 within 20 seconds. u Customization is completed. |
*1:Models with the smart entry system have an ENGINE START/STOP button instead of an ignition switch.
*2:Default setting
Continued
151
uuLocking and Unlocking the DoorsuCustomizing the Auto Door Locking/Unlocking Setting
Driver's Door Open Mode*2
Apply the parking brake.
Models with continuously variable transmission
Move the shift lever out of ( . Close the driver’s door.
Turn the ignition switch to ON (w*1.
Models with continuously variable transmission
Park Unlock Mode
Apply the parking brake. Move the shift lever to ( .
Off
Apply the parking brake.
Models with continuously variable transmission
Move the shift lever to ( . Open the driver’s door.
Turn the ignition switch to ON
(w*1.
Press and hold the left side of the master door lock switch on the driver’s door for more than five seconds. Release the switch after you hear a click twice.
Turn the ignition switch to ACCESSORY (q*1 within 20 seconds.
u Customization is completed.
*1:Models with the smart entry system have an ENGINE START/STOP button instead of an ignition switch.
*2:Default setting
Download Manual
( .
( .