Gauges and Displays
Gauges include the speedometer, tachometer, fuel gauge, and related indicators. They are displayed when the ignition switch is in ON w*1.
Displays your driving speed in mph or km/h.
Shows the number of engine revolutions per minute.
*1: Models with the smart entry system have an ENGINE START/STOP button instead of an ignition switch.
uuGauges and DisplaysuGauges
Displays the amount of fuel left in the fuel tank.
Displays the temperature of the engine coolant.
Blinks when the tachometer reading approaches the red zone.
109
uuGauges and DisplaysuInformation Display*
The information display shows the odometer, trip meter, engine oil life and maintenance service item codes, and other gauges.
Press the 
(TRIP) knob to change the display.
Shows the total number of miles or kilometers that your vehicle has accumulated.
To reset a trip meter, display it, then press and hold the 
knob. The trip meter is reset to 0.0.
uuGauges and Displays uInformation Display*
economy is also reset.
Shows the instant fuel economy as a bar graph in mpg or l/100km.
Shows the remaining oil life and Maintenance MinderTM.
2 Maintenance MinderTM P. 513
Range Shows the estimated distance you can travel on the remaining fuel. This estimated distance is based on the vehicle’s current fuel economy.
Continued 111
uuGauges and DisplaysuInformation Display*
Shows the outside temperature in Fahrenheit (U.S.) or Celsius (Canada).
Adjust the temperature reading by up to ± 5°F or ± 3°C if the temperature reading seems incorrect.
(TRIP) knob for 10 seconds or more while the outside temperature is shown on the information display.u The information display goes into temperature adjustment mode. The display starts showing from -5°F to +5°F (U.S.) or -3°C to +3°C (Canada).
knob when the right adjustment amount is shown.u The adjustment is complete.
*1: Models with the smart entry system have an ENGINE START/STOP button instead of an ignition switch.
112
uuGauges and DisplaysuDriver Information Interface*
The driver information interface displays the odometer, trip meter, outside temperature, and other gauges.
It also displays important messages such as warnings and other helpful information.
Continued
uuGauges and DisplaysuDriver Information Interface*
Switching the Display
Press the (display/information) button and press 
or 
to change the display. Press ENTER to see detailed information.
*1:You can add the contents using the audio/information screen.
114
uuGauges and DisplaysuDriver Information Interface*
*1:You can add the contents using the audio/information screen.
Continued
115
uuGauges and DisplaysuDriver Information Interface*
116
Shows the total number of miles or kilometers that your vehicle has accumulated.
Shows the total number of miles or kilometers driven since the last reset. Meters A and B can be used to measure two separate trips.
To reset a trip meter, display it, then press and hold the 
knob. The trip meter is reset to 0.0.
uuGauges and DisplaysuDriver Information Interface*
economy is also reset.
Shows the time elapsed since Trip A or Trip B was reset.
Shows the average speed in mph or km/h since Trip A or Trip B was reset.
Shows the remaining oil life and Maintenance MinderTM.
2 Maintenance MinderTM P. 513
* Not available on all models
Continued 117
uuGauges and DisplaysuDriver Information Interface*
Shows the outside temperature in Fahrenheit (U.S.) or Celsius (Canada).
Adjust the temperature reading by up to ±5°F or ±3°C if the temperature reading seems incorrect.
Use the customized features in the driver information interface or audio/information screen to correct the temperature.
2 Customized Features P. 124, 328
Shows the instant fuel economy as a bar graph in mpg or l/100 km.
When the turbo charger is producing boost, this meter shows the boost pressure.
uuGauges and DisplaysuDriver Information Interface*
The navigation system shows you turn-by-turn directions to your destination.
2 Refer to the Navigation System Manual
Shows the current audio information.
2 Audio System Basic Operation P. 219, 237
Shows the current mail information.
2 Bluetooth® HandsFreeLink®* P. 385
Shows the current phone information.
2 Bluetooth® HandsFreeLink®* P. 361, 385
Continued 119
uuGauges and DisplaysuDriver Information Interface*
Displays the strength (G) and direction of the load that is applied to the vehicle during driving.
Displays the brake pressure in psi when the brake is applied.
Displays the accelerator position in degrees of
%.
* Not available on all models
uuGauges and DisplaysuDriver Information Interface*
Light up from left to right according to engine speed.
* Not available on all models
Continued
121
uuGauges and DisplaysuDriver Information Interface*
Measures the lap time, and displays the previously measured times, split time and the fastest lap time.
u To measure the time per lap, press the 3 / 4 button at the completion of each lap.
u To return to the Stopwatch screen, press the (Hang-up/back) button.
* Not available on all models
uuGauges and DisplaysuDriver Information Interface*
button (when lap time is not running) to change the display, then press the 3 / 4 button to scroll through lap times.u A maximum of 20 lap times can be stored at a time.
button.Continued
123
uuGauges and DisplaysuDriver Information Interface*
Models with color audio system
Use the driver information interface to customize certain features.
Select the Vehicle Settings screen by pressing the button while the ignition switch is in ON w*1, and the vehicle is at a complete stop. Select Vehicle Settings, then press the ENTER button.
*1: Models with the smart entry system have an ENGINE START/STOP button instead of an ignition switch.
124
uuGauges and DisplaysuDriver Information Interface*
Press the button.
TPMS Calibration
Forward Collision Warning Distance
ACC Forward Vehicle Detect Beep
Road Departure Mitigation Setting
Lane Keeping Assist Suspend Beep
Language Selection
Adjust Outside Temp. Display
Tachometer
Continued
125
uuGauges and DisplaysuDriver Information Interface*
Maintenance Reset
Interior Light Dimming Time Headlight Auto OFF Timer
Auto Light Sensitivity
Auto Interior Illumination Sensitivity
Auto Headlight ON With Wiper ON
Auto Door Lock
Auto Door Unlock
Key And Remote Unlock Mode Keyless Lock Answer Back
Security Relock Timer
Default All
126
uuGauges and DisplaysuDriver Information Interface*
Setup Group Customizable Features Description Selectable Settings
ACC Forward Vehicle
Changes at which distance the CMBSTM alerts. Long/Normal*1/Short
Causes the system to beep when the system detects
*1:Default Setting
Road Departure Mitigation Setting
Lane Keeping Assist Suspend Beep
a vehicle, or when the vehicle goes out of ACC range.
Changes the setting for the road departure mitigation system.
Causes the system to beep when the LKAS is suspended.
ON/OFF*1
ON/OFF*1
Continued
uuGauges and DisplaysuDriver Information Interface*
Setup Group Customizable Features Description Selectable Settings
|
Meter Setup |
Language Selection |
Changes the displayed language. |
English*1/Français/Español |
|
Adjust Outside Temp. Display |
Adjusts the temperature reading by a few degrees. |
-5°F ~ ±0°F*1 ~ +5°F |
|
|
“Trip A” Reset Timing |
Changes the setting of how the distance, average fuel economy, average speed, and elapsed time of trip A is reset. |
When Refueled/IGN OFF/ Manually Reset*1 |
|
|
“Trip B” Reset Timing |
Changes the setting of how the distance, average fuel economy, average speed, and elapsed time of trip B is reset. |
When Refueled/IGN OFF/ Manually Reset*1 |
|
|
Adjust Alarm Volume |
Changes the volume setting for buzzers, warnings, turn signals, and other alerting systems. |
High/Mid*1/Low |
|
|
Fuel Efficiency Backlight |
Turns the ambient meter feature on and off. |
ON*1/OFF |
|
|
Speed/Distance Units |
Selects the trip computer units. |
mph∙miles*1/km/h∙km |
|
|
Tachometer |
Selects whether the tachometer comes on the driver information interface. |
ON*1/OFF |
*1:Default Setting
uuGauges and DisplaysuDriver Information Interface*
Setup Group Customizable Features Description Selectable Settings
Headlight Auto OFF Timer
Changes the length of time the interior lights stay on after you close the doors.
Changes the length of time the exterior lights stay on after you close the driver’s door.
60sec/30sec*1/15sec
60sec/30sec/15sec*1/0sec
Auto Light Sensitivity Changes the timing for the headlights to come on. Max/High/Mid*1/Low/Min
Auto Interior Illumination Sensitivity
Auto Headlight ON With Wiper ON
Changes the sensitivity of the brightness of the instrument panel when the headlight switch is in the AUTO position.
Changes the settings for the wiper operation when the headlights automatically come on while the headlight switch is in the AUTO position.
Max/High/Mid*1/Low/Min
ON*1/OFF
*1: Default Setting
Continued
uuGauges and DisplaysuDriver Information Interface*
Setup Group Customizable Features Description Selectable Settings
|
Door Setup |
Auto Door Lock |
Changes the setting for when the doors automatically lock. |
With Vehicle Speed*1/Shift From P/OFF |
|
Auto Door Unlock |
Changes the setting for when the doors automatically unlock. |
When Driver’s Door Opens*1/ When Shifting Into Park/ When Ignition Switched OFF/OFF |
|
|
Key And Remote Unlock Mode |
Sets up either the driver’s door or all doors to unlock on the first operation of the remote or ignition key. |
Driver Door*1/ All Doors |
|
|
Keyless Lock Answer Back |
LOCK/UNLOCK- The exterior lights flash. LOCK (2nd push)- The beeper sounds. |
ON*1/OFF |
|
|
Security Relock Timer |
Changes the time it takes for the doors to relock and the security system to set after you unlock the vehicle without opening a door. |
90sec/60sec/30sec*1 |
— Resets or cancels the engine oil life display when you have performed the maintenance service.
*1: Default Setting
uuGauges and DisplaysuDriver Information Interface*
Below are steps that explain how to change the reset timing for trip A from the default setting (manual) so that it resets automatically when the vehicle is fully refueled.
Settings, then press the ENTER button.
appears on the display.
u Language Selection appears first in the display.
Continued
uuGauges and DisplaysuDriver Information Interface*
u The display switches to the customization setup screen, where you can select When Refueled, IGN OFF, Manually Reset, or Exit.
appears, then the display returns to the customization menu screen.
Download Manual