Cruise Control
What Is Cruise Control
Cruise control lets you maintain a set speed without keeping your foot on the accelerator pedal.
Requirements
Use cruise control when the vehicle speed is greater than 20 mph (30 km/h).
Switching Cruise Control On and Off
 WARNING: Do not use cruise control on winding roads, in heavy traffic or when the road surface is slippery. This could result in loss of vehicle control, serious injury or death. |
The cruise controls are on the steering wheel.
Switching Cruise Control On
 Press the button to put the system in standby mode. |
Switching Cruise Control Off
Note: When you switch cruise control off the set speed clears.
Setting the Cruise Control Speed
| WARNING: When you are going downhill, your vehicle speed could increase above the set speed. The system does not apply the brakes. |
Drive to the speed you prefer.
Take your foot off the accelerator pedal.
Note: The indicator changes color in the information display.
Changing the Set Speed
Press and hold the toggle button upward to accelerate. Release the button when you have reached your preferred speed.
Press and hold the toggle button downward to decelerate. Release the button when you have reached your preferred speed.
Note: If you accelerate by pressing the accelerator pedal, the set speed does not change.When you release the accelerator pedal, your vehicle returns to the speed that you previously set.
Canceling the Set Speed
Note: The system remembers the set speed.
Note: The system cancels if the vehicle speed drops below 10 mph (16 km/h) under the set speed when driving uphill.
Resuming the Set Speed
Cruise Control Indicators
Download Manual