Road Departure Mitigation (RDM)
Alerts and helps to assist you if the system determines a possibility of your vehicle unintentionally crossing over detected lane markings and/or leaving the roadway altogether while driving between 45-90 mph (72-145km/h).
If your vehicle is getting too close to detected lane markings without a turn signal activated, the system, in addition to a visual alert, applies steering torque and alerts you with rapid vibrations on the steering wheel, to help you remain within the detected lane. Braking is applied only when the lane markings are solid continuous lines.
- Turning the System On or Off
- Changing Settings
- Important Safety Reminder
Parent topic: Driving
■Turning the System On or Off
Press the safety support switch, roll the left selector wheel to the RDM symbol and push it.
Parent topic: Road Departure Mitigation (RDM)
■Changing Settings
Determine the warning timing. The vehicle must be in Park (P).
- From the HOME screen, select Settings.
- Select Vehicle.
- Select Driver Assist System Setup.
- Select Road Departure Mitigation Setting.
- Select from the options.
- Press Save.
Parent topic: Road Departure Mitigation (RDM)
■Important Safety Reminder
The RDM system has limitations. Over-reliance on it may result in a collision. It is always your responsibility to keep your vehicle within the driving lane.
Parent topic: Road Departure Mitigation (RDM)
Download Manual