Helps maintain a constant vehicle speed and a set following interval behind a vehicle detected ahead of yours
and, if the detected vehicle comes to a stop, can decelerate and stop your vehicle, without you having to keep your foot on the brake or the accelerator. When ACC with LSF slows your vehicle by applying the brakes, your vehicle's brake lights will illuminate.
Activating and Setting the Vehicle Speed
Adjusting the Vehicle Speed
Adjusting the Vehicle Distance
During Operation
Canceling ACC
Switching to Standard Cruise Control
Parent topic: Driving
■Activating and Setting the Vehicle Speed
Press the MAIN button. The ACC indicator appears in the multi-information display.
Accelerate to the desired speed (above
25 mph/40 km/h). Take your foot off the pedal and press the SET/- button to set the speed.
Parent topic: Adaptive Cruise Control (ACC) with Low Speed Follow (LSF)
■Adjusting the Vehicle Speed
Press the RES/+ button to increase speed or the SET/- button to decrease speed. Each time you press the button, the vehicle speed is increased or decreased by about
1 mph (1.6 km/h). If you keep the button pressed, the vehicle speed increases or decreases by
5 mph or
5 km/h until you release it.
Parent topic: Adaptive Cruise Control (ACC) with Low Speed Follow (LSF)
■Adjusting the Vehicle Distance
Press the Interval button to change the following interval. Each time you press the button, the setting cycles through extra long, long, middle, and short.
Parent topic: Adaptive Cruise Control (ACC) with Low Speed Follow (LSF)
■During Operation
If a vehicle is detected ahead of you when ACC is turned on, the system maintains, accelerates, or decelerates your vehicle’s set speed to keep the vehicle’s set following interval from the vehicle ahead.
If a vehicle detected ahead of you slows down abruptly, or if another vehicle cuts in front of you, a beep sounds and BRAKE appears on the
driver information interface to alert you
.
ACC has limited braking capability.
When your vehicle speed drops below
22 mph (35 km/h), ACC will automatically cancel and no longer will apply your vehicle’s brakes.
Always be prepared to apply the brake pedal when conditions require.
Parent topic: Adaptive Cruise Control (ACC) with Low Speed Follow (LSF)
■Canceling ACC
You can press the CANCEL button, MAIN button or the brake pedal.
The ACC
with LSF indicator goes off.
Certain conditions may cause ACC to cancel automatically. When this happens, appears on the
driver information interface.
Improper use of ACC can lead to a crash.
Use ACC only when traveling on open highways in good weather.
Parent topic: Adaptive Cruise Control (ACC) with Low Speed Follow (LSF)
■Switching to Standard Cruise Control
Press and hold the Interval button for one second.
Cruise Mode Selected appears in the
driver information interface for two seconds, and then the mode switches to Cruise.. Press and hold the interval button again to switch back to ACC
with LSF.
ACC Mode Selected appears on the
driver information interface display for two seconds.
Parent topic: Adaptive Cruise Control (ACC) with Low Speed Follow (LSF)
