Fuses
Fuse Locations
If any electrical devices are not working, turn the ignition switch to LOCK
*1 and check to see if any applicable fuse is blown.
Fuse locations are shown on the fuse box cover. Locate the fuse in question by the fuse number and box cover number.
Circuit Protected Amps
Circuit Protected Amps
Option Block 1*2 (40 A)
−*3 −
Option Block 2*2 (40 A)
4 −*3 −
VST 2 (30 A)
Power Tail Gate*2 (40 A)
−*3 −
Located near the brake fluid reservoir. Push the tabs to open the box.
EPS 70 A
IG Main 1 30 A*2
50 A*3
2 Fuse Box Option 40 A
Fuse Box 1 60 A
Front Wiper Motor 30 A Sub Fan Motor 30 A
*1:Models with the smart entry system have an ENGINE START/STOP button instead of an ignition switch.
*2:Models with smart entry system
*3:Models without smart entry system
Continued
635
uuFusesuFuse Locations
636
32 −*3 −
33 −*3 −
Circuit Protected Amps
34 USB Charger*3 (7.5 A) 35 −*3 −
36 −*3 −
*1:Models with smart entry system
*2:Models without smart entry system
*3:Models with navigation system
Located under the dashboard.
Fuse locations are shown on the label on the steering column lower cover.
Locate the fuse in question by the fuse number and label number.
uuFusesuFuse Locations
Circuit Protected Amps
Circuit Protected Amps
Circuit Protected Amps
1 Accessory 10 A
18 Front Driver's Lumber
support*
(10 A)
39 Driver's Door Unlock (10 A) a Power Tailgate Closer* (20 A)
Option 2*1 5 A
Sliding*
Reclining*
(20 A)
(20 A)
d Panorama Shade Motor (20 A) e Audio Amp (20 A)
(Cargo Area)
*1:Models with smart entry system
(20 A)
11 Engine Control 5 A
*2:Models without smart entry system
Socket
20 A
10 A
STS*2 5 A
Power Window
20 A
Reclining*
(20 A)
16 Door Lock 20 A
Transmission*1
17 Option 2*2
(10 A)
5 A
* Not available on all models
Continued
637
uuFusesuFuse Locations
Located under the dashboard.
Fuse locations are shown on the label under the steering column.
Locate the fuse in question by the fuse number and label number.
638
uuFusesuInspecting and Changing Fuses
*1. Turn the headlights and all accessories off.u If the fuse is blown, use a Phillips-head screwdriver to remove the screw and replace it with a new one.
u If there is a blown fuse, remove it with the fuse puller, and replace it with a new one.
*1: Models with the smart entry system have an ENGINE START/STOP button instead of an ignition switch.
Download Manual