Disclaimer: Not affiliated with or endorsed by Honda Motor Company. For informational purposes only. Full Disclaimer

2021 Honda Civic Owners Manual - Gauges and Driver Information Interface



Gauges and Driver Information Interface

Gauges include the speedometer, tachometer, fuel gauge, and related indicators. They are displayed when the ignition switch is in ON w*1.

Displays your driving speed in mph or km/h.

Shows the number of engine revolutions per minute.

Displays the amount of fuel left in the fuel tank.

    Temperature Gauge

Displays the temperature of the engine coolant.

*1: Models with the smart entry system have an ENGINE START/STOP button instead of an ignition switch.

uuGauges and Driver Information Interface uDriver Information Interface

The driver information interface displays the odometer, trip meter, outside temperature, and other gauges.

It also displays important messages such as warnings and other helpful information.

Continued

uuGauges and Driver Information InterfaceuDriver Information Interface

    Switching the Display
    Main displays

Press the (display/information) button and press or to change the display. Press ENTER to see detailed information.

*1:You can add the contents using the audio/information screen.

110

* Not available on all models

uuGauges and Driver Information Interface uDriver Information Interface

■  Odometer

Shows the total number of miles or kilometers that your vehicle has accumulated.

Shows the total number of miles or kilometers driven since the last reset. Meters A and B can be used to measure two separate trips.

To reset a trip meter, display it, then press and hold the knob. The trip meter is reset to 0.0.

Continued 111

uuGauges and Driver Information InterfaceuDriver Information Interface

■  Average Fuel Economy Shows the estimated average fuel economy of each trip meter in mpg or l/100 km. The display is updated at set intervals. When a trip meter is reset, the average fuel

economy is also reset.

■  Range Shows the estimated distance you can travel on the remaining fuel. This estimated distance is based on the vehicle’s current fuel economy.

Shows the time elapsed since Trip A or Trip B was reset.

Shows the average speed in mph or km/h since Trip A or Trip B was reset.

Shows the remaining oil life and Maintenance MinderTM.

2 Maintenance MinderTM P. 515

* Not available on all models

uuGauges and Driver Information Interface uDriver Information Interface

Shows the outside temperature in Fahrenheit (U.S.) or Celsius (Canada).

Adjust the temperature reading by up to ±5°F or ±3°C if the temperature reading seems incorrect.

Use the customized features in the driver information interface or audio/information screen to correct the temperature.

2 Customized Features P. 115, 325

Shows the instant fuel economy as a bar graph in mpg or l/100 km.

When the turbo charger is producing boost, this meter shows the boost pressure.

* Not available on all models

Continued 113

uuGauges and Driver Information InterfaceuDriver Information Interface

■  Compass*

Shows the compass screen.

When driving guidance is provided by the navigation system* or Android Auto, turn- by-turn directions to your destination appear.

2 Refer to the Navigation System Manual

2 Android Auto P. 293

Shows the current audio information.

2 Audio System Basic Operation P. 227

Shows the current mail information.

2 Bluetooth® HandsFreeLink® P. 382

Shows the current phone information.

2 Bluetooth® HandsFreeLink® P. 382

114

* Not available on all models

uuGauges and Driver Information Interface uDriver Information Interface

Models with color audio system

Use the driver information interface to customize certain features.

Select the Vehicle Settings screen by pressing the button while the ignition switch is in ON w, and the vehicle is at a complete stop, and the shift lever is in . Select Vehicle Settings, then press the ENTER button.

Continued 115

uuGauges and Driver Information InterfaceuDriver Information Interface

Press the button.

TPMS Calibration

Forward Collision Warning Distance

ACC Forward Vehicle Detect Beep

Road Departure Mitigation Setting

Lane Keeping Assist Suspend Beep

Language Selection

Adjust Outside Temp. Display

Tachometer

116

uuGauges and Driver Information Interface uDriver Information Interface

Maintenance Info.

Interior Light Dimming Time Headlight Auto OFF Timer

Auto Light Sensitivity

Auto Interior Illumination Sensitivity

Auto Headlight ON With Wiper ON

Auto Door Lock

Auto Door Unlock

Key And Remote Unlock Mode Keyless Lock Answer Back

Security Relock Timer

Default All

Continued

117

uuGauges and Driver Information InterfaceuDriver Information Interface

Setup Group Customizable Features Description Selectable Settings

ACC Forward Vehicle

Changes at which distance the CMBSTM alerts. Long/Normal*1/Short

Causes the system to beep when the system detects

Detect Beep

Road Departure Mitigation Setting

Lane Keeping Assist Suspend Beep

a vehicle, or when the vehicle goes out of ACC range.

Changes the setting for the road departure mitigation system.

Causes the system to beep when the LKAS is suspended.

ON/OFF*1

ON/OFF*1

*1: Default Setting

118

uuGauges and Driver Information Interface uDriver Information Interface

Setup Group Customizable Features Description Selectable Settings

Meter Setup

Language Selection

Changes the displayed language.

English*1/Français/Español

Adjust Outside Temp. Display

Adjusts the temperature reading by a few degrees.

-5°F ~ ±0°F*1 ~ +5°F

“Trip A” Reset Timing

Changes the setting of how the distance, average fuel economy, average speed, and elapsed time of trip A is reset.

When Refueled/IGN OFF/ Manually Reset*1

“Trip B” Reset Timing

Changes the setting of how the distance, average fuel economy, average speed, and elapsed time of trip B is reset.

When Refueled/IGN OFF/ Manually Reset*1

Adjust Alarm Volume

Changes the volume setting for buzzers, warnings, turn signals, and other alerting systems.

High/Mid*1/Low

Fuel Efficiency Backlight

Turns the ambient meter feature on and off.

ON*1/OFF

Speed/Distance Units

Selects the trip computer units.

mph∙miles*1/km/h∙km

Tachometer

Selects whether the tachometer comes on the driver information interface.

ON*1/OFF

*1: Default Setting

Continued

119

uuGauges and Driver Information InterfaceuDriver Information Interface

Setup Group Customizable Features Description Selectable Settings

Headlight Auto OFF Timer

Changes the length of time the interior lights stay on after you close the doors.

Changes the length of time the exterior lights stay on after you close the driver’s door.

60sec/30sec*1/15sec

60sec/30sec/15sec*1/0sec

Auto Light Sensitivity Changes the timing for the headlights to come on. Max/High/Mid*1/Low/Min

Auto Interior Illumination Sensitivity

Auto Headlight ON With Wiper ON

Changes the sensitivity of the brightness of the instrument panel when the headlight switch is in the AUTO position.

Changes the settings for the wiper operation when the headlights automatically come on while the headlight switch is in the AUTO position.

Max/High/Mid*1/Low/Min

ON*1/OFF

*1: Default Setting

uuGauges and Driver Information Interface uDriver Information Interface

Setup Group Customizable Features Description Selectable Settings

Door Setup

Auto Door Lock

Changes the setting for when the doors automatically lock.

With Vehicle Speed*1/Shift From P/OFF

Auto Door Unlock

Changes the setting for when the doors automatically unlock.

When Driver’s Door Opens*1/ When Shifting Into Park/ When Ignition Switched OFF/OFF

Key And Remote Unlock Mode

Sets up either the driver’s door or all doors to unlock on the first operation of the remote or ignition key.

Driver Door*1/ All Doors

Keyless Lock Answer Back

LOCK/UNLOCK- The exterior lights flash. LOCK (2nd push)- The beeper sounds.

ON*1/OFF

Security Relock Timer

Changes the time it takes for the doors to relock and the security system to set after you unlock the vehicle without opening a door.

90sec/60sec/30sec*1

— Resets or cancels the engine oil life display when you have performed the maintenance service.

*1: Default Setting

Continued

121

uuGauges and Driver Information InterfaceuDriver Information Interface

Below are steps that explain how to change the reset timing for trip A from the default setting (manual) so that it resets automatically when the vehicle is fully refueled.

    Press the button to select Vehicle

Settings, then press the ENTER button.

    Press the 3 / 4 button until Meter Setup

appears on the display.

    Press the ENTER button.

u Language Selection appears first in the display.

uuGauges and Driver Information Interface uDriver Information Interface

    Press the 3 / 4 button until “Trip A” Reset Timing appears on the display, then press the ENTER button.

u The display switches to the customization setup screen, where you can select When Refueled, IGN OFF, Manually Reset, or Exit.

    Press the 3 / 4 button and select When Refueled, then press the ENTER button. u The When Refueled Setup screen

appears, then the display returns to the customization menu screen.

    Press the 3 / 4 button until Exit appears on the display, then press the ENTER button.
    Repeat Step 6 until you return to the normal screen.

124


Download Manual